2000 Ford Excursion HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

Gates HVAC Heater Hose 28466 - Tee To Heater Valve

Position: Tee To Heater Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Limited, XLT W/Aux. Heater; Cut to fit - 90º Molded Heater Hose Fuel Type: DIESEL Tee To Heater Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	Limited, XLT	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: DIESEL	Tee To Heater Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2000 Ford Excursion HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Limited, XLT Cut to fit - 90º Molded Heater Hose Fuel Type: DIESEL Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	Limited, XLT	Cut to fit - 90º Molded Heater Hose	Fuel Type: DIESEL	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87789

2000 Ford Excursion HVAC Heater Hose DY 87789

Dayco HVAC Heater Hose 87789 - Heater To Pipe, Heater Outlet

Position: Heater To Pipe, Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. A protective sleeve is also made with this hose to protect contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
5.4L V8 Limited, XLT Small I.D. Heater Hose Heater Outlet
6.8L V10 Limited, XLT w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16331M
Duralast D87789
Ford F81Z-18472-HB
Ford F81H-18K580-HA
Gates 19306
Motorcraft KH599
NAPA 11306
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Limited, XLT	Small I.D. Heater Hose	Heater Outlet
6.8L V10	Limited, XLT	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71986

2000 Ford Excursion HVAC Heater Hose DY 71986

Dayco HVAC Heater Hose 71986 - Coolant Reservoir

Position: Coolant Reservoir

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 24 3/4
End 1 Inside Diameter : 31/32
End 2 Inside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
5.4L V8 Limited, XLT Curved Radiator Hose Coolant Reservoir
6.8L V10 Limited, XLT Curved Radiator Hose Coolant Reservoir
7.3L V8 Limited, XLT Curved Radiator Hose Coolant Reservoir
Part Interchange
ACDelco 18285L
CARQUEST 19812
Duralast E71986
Ford F81A-8C351-AC
Ford F81Z-8075-AA
Ford F81A-8C351-AD
Gates 19812
Goodyear 64315
Motorcraft KM4782
NAPA 11812
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Limited, XLT	Curved Radiator Hose	Coolant Reservoir
6.8L V10	Limited, XLT	Curved Radiator Hose	Coolant Reservoir
7.3L V8	Limited, XLT	Curved Radiator Hose	Coolant Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 19812

2000 Ford Excursion HVAC Heater Hose ZO 19812

Gates HVAC Heater Hose 19812 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 32.67
Inside Diameter 1 : 1
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford Excursion Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Limited, XLT	W/1" I.D. Hose - Molded Heater Hose	Fuel Type: GAS	Reservoir To Radiator
6.8L V10	Limited, XLT	W/1" I.D. Hose - Molded Heater Hose	Fuel Type: GAS	Reservoir To Radiator
7.3L V8	Limited, XLT	W/1" I.D. Hose - Molded Heater Hose	Fuel Type: DIESEL	Reservoir To Radiator

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88417

2000 Ford Excursion HVAC Heater Hose DY 88417

Dayco HVAC Heater Hose 88417 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
5.4L V8 Limited, XLT Small I.D. Heater Hose Heater Inlet
6.8L V10 Limited, XLT Small I.D. Heater Hose Heater Inlet
Part Interchange
Duralast C88417
Ford F81H-18K579-H
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Limited, XLT	Small I.D. Heater Hose	Heater Inlet
6.8L V10	Limited, XLT	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19306

2000 Ford Excursion HVAC Heater Hose ZO 19306

Gates HVAC Heater Hose 19306 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.21
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford Excursion Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Limited, XLT	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
6.8L V10	Limited, XLT	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87889

2000 Ford Excursion HVAC Heater Hose DY 87889

Dayco HVAC Heater Hose 87889 - Engine To Heater

Position: Engine To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 30
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
7.3L V8 Limited, XLT w/o Quick Connect - Small I.D. Heater Hose Engine To Heater
Part Interchange
ACDelco 18191L
CARQUEST 19200
Duralast E87889
Ford F81Z-18472-MA
Gates 19200
NAPA 11200
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	Limited, XLT	w/o Quick Connect - Small I.D. Heater Hose	Engine To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88418

2000 Ford Excursion HVAC Heater Hose DY 88418

Dayco HVAC Heater Hose 88418 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
6.8L V10 Limited, XLT Small I.D. Heater Hose Heater Outlet
Part Interchange
Duralast C88418
Ford F81H-18K579-JA
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.8L V10	Limited, XLT	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87891

2000 Ford Excursion HVAC Heater Hose DY 87891

Dayco HVAC Heater Hose 87891 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 22
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
5.4L V8 Limited, XLT Small I.D. Heater Hose Intake Manifold To Heater
Part Interchange
ACDelco 18208L
CARQUEST 19218
Duralast E87891
Ford YC3Z-18472-EA
Gates 19218
NAPA 11218
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Limited, XLT	Small I.D. Heater Hose	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87790

2000 Ford Excursion HVAC Heater Hose DY 87790

Dayco HVAC Heater Hose 87790 - Engine To Heater

Position: Engine To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 27
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
7.3L V8 Limited, XLT w/Quick Connect - Small I.D. Heater Hose Engine To Heater
Part Interchange
Duralast E87790
Ford F81H-18K579-MA
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	Limited, XLT	w/Quick Connect - Small I.D. Heater Hose	Engine To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87791

2000 Ford Excursion HVAC Heater Hose DY 87791

Dayco HVAC Heater Hose 87791 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 29
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. A protective sleeve is also made with this hose to protect contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
7.3L V8 Limited, XLT w/Quick Connect - Small I.D. Heater Hose Heater To Water Pump
Part Interchange
Duralast E87791
Ford XC3H-18K580-JA
Ford F81H-18K580-M
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	Limited, XLT	w/Quick Connect - Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19200

2000 Ford Excursion HVAC Heater Hose ZO 19200

Gates HVAC Heater Hose 19200 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 44.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Limited, XLT W/O Aux. Heater - Molded Heater Hose Fuel Type: DIESEL Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	Limited, XLT	W/O Aux. Heater - Molded Heater Hose	Fuel Type: DIESEL	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19201

2000 Ford Excursion HVAC Heater Hose ZO 19201

Gates HVAC Heater Hose 19201 - Heater To Water Pump, Heater Valve To Water Pump

Position: Heater To Water Pump, Heater Valve To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 44.2
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Limited, XLT W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: DIESEL Heater To Water Pump, Heater Valve To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	Limited, XLT	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: DIESEL	Heater To Water Pump, Heater Valve To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87890

2000 Ford Excursion HVAC Heater Hose DY 87890

Dayco HVAC Heater Hose 87890 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 31
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Position
7.3L V8 Limited, XLT w/o Quick Connect - Small I.D. Heater Hose Heater To Water Pump
Part Interchange
ACDelco 18192L
ACDelco 18165L
CARQUEST 19201
CARQUEST 19191
Duralast E87890
Ford F7UZ-18472-NA
Ford F81Z-18472-MB
Gates 19201
Gates 19191
NAPA 11201
NAPA 11191
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	Limited, XLT	w/o Quick Connect - Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19218

2000 Ford Excursion HVAC Heater Hose ZO 19218

Gates HVAC Heater Hose 19218 - Heater To Intake

Position: Heater To Intake

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 37.7
Inside Diameter 1 : .63
Inside Diameter 2 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 Limited, XLT W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose Fuel Type: GAS Heater To Intake
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Limited, XLT	W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: GAS	Heater To Intake

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2000 Ford Excursion HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - PCV Heater To Throttle Body, Intake Manifold To PCV Heater, Throttle Body To Pipe-1

Position: PCV Heater To Throttle Body, Intake Manifold To PCV Heater, Throttle Body To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2000 Ford Excursion Engines.

Engine	Sub Model	Notes	Fit Notes	Position
6.8L V10	Limited, XLT	Cut to Length, 24" - Straight Heater Hose (Standard)	Fuel Type: GAS	PCV Heater To Throttle Body, Intake Manifold To PCV Heater, Throttle Body To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2000 Ford Excursion HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2000 Ford Excursion Engines.

Engine	Sub Model	Notes	Fit Notes	Position
6.8L V10	Limited, XLT	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir
7.3L V8	Limited, XLT	W/3/8" I.D. Hose; Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: DIESEL	Radiator To Reservoir

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2000 Ford Excursion HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Tee

Position: Heater To Pipe-1, Heater To Tee

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Ford Excursion Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Limited, XLT W/Aux. Heater; Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: DIESEL Heater To Pipe-1, Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16331M
Duralast	D87789
Ford	F81Z-18472-HB
Ford	F81H-18K580-HA
Gates	19306
Motorcraft	KH599
NAPA	11306

ACDelco	18285L
CARQUEST	19812
Duralast	E71986
Ford	F81A-8C351-AC
Ford	F81Z-8075-AA
Ford	F81A-8C351-AD
Gates	19812
Goodyear	64315
Motorcraft	KM4782
NAPA	11812

ACDelco	18191L
CARQUEST	19200
Duralast	E87889
Ford	F81Z-18472-MA
Gates	19200
NAPA	11200

ACDelco	18208L
CARQUEST	19218
Duralast	E87891
Ford	YC3Z-18472-EA
Gates	19218
NAPA	11218

ACDelco	18192L
ACDelco	18165L
CARQUEST	19201
CARQUEST	19191
Duralast	E87890
Ford	F7UZ-18472-NA
Ford	F81Z-18472-MB
Gates	19201
Gates	19191
NAPA	11201
NAPA	11191

Duralast	C88417
Ford	F81H-18K579-H

Duralast	C88418
Ford	F81H-18K579-JA

Duralast	E87790
Ford	F81H-18K579-MA

Duralast	E87791
Ford	XC3H-18K580-JA
Ford	F81H-18K580-M

My Vehicle:

2000 Ford Excursion HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Tee To Heater Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87789 - Heater To Pipe, Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71986 - Coolant Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19812 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88417 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19306 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87889 - Engine To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88418 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87891 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87790 - Engine To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87791 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19200 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19201 - Heater To Water Pump, Heater Valve To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87890 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19218 - Heater To Intake

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - PCV Heater To Throttle Body, Intake Manifold To PCV Heater, Throttle Body To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Tee

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?