1997 Ford Expedition HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

Gates HVAC Heater Hose 28466 - Pipe To Auxiliary Heater

Position: Pipe To Auxiliary Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1997 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	W/Aux. Heater - 90º Molded Heater Hose	Fuel Type: GAS	Pipe To Auxiliary Heater
5.4L V8	Eddie Bauer, XLT, XLT Plus	W/Aux. Heater - 90º Molded Heater Hose	Fuel Type: GAS	Pipe To Auxiliary Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87756

1997 Ford Expedition HVAC Heater Hose DY 87756

Dayco HVAC Heater Hose 87756 - Heater Outlet, Heater To Intake Manifold

Position: Heater Outlet, Heater To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Position
4.6L V8 Eddie Bauer, XLT w/o Aux. Heater - Small I.D. Heater Hose Heater Outlet
5.4L V8 Eddie Bauer, XLT w/o Aux. Heater - Small I.D. Heater Hose Heater To Intake Manifold
Part Interchange
ACDelco 14257S
CARQUEST 19193
Duralast C87756
Ford F65Z-18472-BB
Ford F65H-18K580-BA
Ford F65H-18K579-BA
Gates 19193
NAPA 11193
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Eddie Bauer, XLT	w/o Aux. Heater - Small I.D. Heater Hose	Heater Outlet
5.4L V8	Eddie Bauer, XLT	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 19193

1997 Ford Expedition HVAC Heater Hose ZO 19193

Gates HVAC Heater Hose 19193 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1997 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
5.4L V8	Eddie Bauer, XLT, XLT Plus	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87793

1997 Ford Expedition HVAC Heater Hose DY 87793

Dayco HVAC Heater Hose 87793 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Position
5.4L V8 Eddie Bauer, XLT w/o Aux. Heater - Small I.D. Heater Hose Pipe To Heater
Part Interchange
ACDelco 18292L
CARQUEST 19199
Duralast E87793
Ford YL3H-18K579-CB
Gates 19199
Goodyear 64144
NAPA 11199
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Eddie Bauer, XLT	w/o Aux. Heater - Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19219

1997 Ford Expedition HVAC Heater Hose ZO 19219

Gates HVAC Heater Hose 19219 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .63
Inside Diameter 2 : .94
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1997 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold
5.4L V8	Eddie Bauer, XLT, XLT Plus	W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87755

1997 Ford Expedition HVAC Heater Hose DY 87755

Dayco HVAC Heater Hose 87755 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Position
4.6L V8 Eddie Bauer, XLT w/o Aux. Heater - Small I.D. Heater Hose Heater Inlet
Part Interchange
Duralast B87755
Ford F65Z-18742-BC
Ford F65H-18K579-BE
Ford F65Z-18472-BC
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Eddie Bauer, XLT	w/o Aux. Heater - Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1997 Ford Expedition HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 Eddie Bauer, XLT, XLT Plus Cut to Length, 11" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Eddie Bauer, XLT, XLT Plus	Cut to Length, 11" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 22540

1997 Ford Expedition HVAC Heater Hose ZO 22540

Gates HVAC Heater Hose 22540 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.18
Number of Branches : 1
Inside Diameter 1 : .625
Inside Diameter 2 : .73
Inside Diameter 3 : .625
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1997 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	W/Aux. Heater; Re-use existing flow restrictor. - Molded Coolant Hose	Fuel Type: GAS	Heater To Intake Manifold
5.4L V8	Eddie Bauer, XLT, XLT Plus	W/Aux. Heater; Re-use existing flow restrictor. - Molded Coolant Hose	Fuel Type: GAS	Heater To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1997 Ford Expedition HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-2 To Engine

Position: Pipe-2 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 XLT, XLT Plus, Eddie Bauer Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-2 To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87976

1997 Ford Expedition HVAC Heater Hose DY 87976

Dayco HVAC Heater Hose 87976 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 5/8
End 3 Inside Diameter : 5/8
End 3 Outside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 1997 Ford Expedition Engines.
Engine Sub Model Notes Position
4.6L V8 Eddie Bauer, XLT w/Aux. Heater - Small I.D. Heater Hose Heater To Pipe
5.4L V8 Eddie Bauer, XLT w/Aux. Heater - Small I.D. Heater Hose Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Eddie Bauer, XLT	w/Aux. Heater - Small I.D. Heater Hose	Heater To Pipe
5.4L V8	Eddie Bauer, XLT	w/Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 22513

1997 Ford Expedition HVAC Heater Hose ZO 22513

Gates HVAC Heater Hose 22513 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25.5
Number of Branches : 1
Inside Diameter 1 : .625
Inside Diameter 2 : .625
Inside Diameter 3 : .625
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1997 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XLT, XLT Plus, Eddie Bauer	W/Aux. Heater - Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe-1
5.4L V8	Eddie Bauer, XLT, XLT Plus	W/Aux. Heater - Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14257S
CARQUEST	19193
Duralast	C87756
Ford	F65Z-18472-BB
Ford	F65H-18K580-BA
Ford	F65H-18K579-BA
Gates	19193
NAPA	11193

ACDelco	18292L
CARQUEST	19199
Duralast	E87793
Ford	YL3H-18K579-CB
Gates	19199
Goodyear	64144
NAPA	11199

Duralast	B87755
Ford	F65Z-18742-BC
Ford	F65H-18K579-BE
Ford	F65Z-18472-BC

My Vehicle:

1997 Ford Expedition HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Pipe To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87756 - Heater Outlet, Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19193 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87793 - Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19219 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87755 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22540 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-2 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87976 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22513 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X