631-302-9490

8AM To 6PM (EST)
Monday to Friday

Secure Checkout with

Shopping Kart 0 item (s)

Home

>

2009 Ford Expedition

My Vehicle:

2009 Ford Expedition HVAC Heater Hose

We have found 4 HVAC Heater Hose for

2009 Ford Expedition

Part Name: HVAC Heater HoseBrand: GatesPart#: 24780

2009 Ford Expedition HVAC Heater Hose ZO 24780

Gates HVAC Heater Hose 24780

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.75
Inside Diameter 1 : .625
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

This Part Fits Following 2009 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes
5.4L V8	Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, Max Eddie Bauer, Max King Ranch, Max Limited, XLT	Heater - Outlet Extension - Molded Coolant Hose	Fuel Type: FLEX, GAS

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 72700

2009 Ford Expedition HVAC Heater Hose DY 72700

Dayco HVAC Heater Hose 72700 - Coolant Reservoir

Position: Coolant Reservoir

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 1
End 1 Outside Diameter : 1 11/32
End 2 Inside Diameter : 1
End 2 Outside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

See more

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

This Part Fits Following 2009 Ford Expedition Engines.

Engine	Sub Model	Notes	Position
5.4L V8	EL Eddie Bauer, EL Limited, EL XLT, King Ranch, Limited, XLT, Eddie Bauer, EL King Ranch, Max Eddie Bauer, Max King Ranch, Max Limited	Curved Radiator Hose	Coolant Reservoir

Part Interchange
Duralast E72700
Ford 7L1Z-8075-B
Ford 7L14-8C351-AB
Motorcraft KM5028
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 23877

2009 Ford Expedition HVAC Heater Hose ZO 23877

Gates HVAC Heater Hose 23877 - Heater - Outlet Assembly

Position: Heater - Outlet Assembly

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.47
Number of Branches : 2
Inside Diameter 1 : .62
Inside Diameter 2 : .62
Inside Diameter 3 : .62

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

This Part Fits Following 2009 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, Max Eddie Bauer, Max King Ranch, Max Limited, XLT	Molded Coolant Hose	Fuel Type: FLEX, GAS	Heater - Outlet Assembly

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 23878

2009 Ford Expedition HVAC Heater Hose ZO 23878

Gates HVAC Heater Hose 23878 - Heater - Inlet Assembly

Position: Heater - Inlet Assembly

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26
Number of Branches : 1
Inside Diameter 1 : .77
Inside Diameter 2 : .78
Inside Diameter 3 : .78
Contains Spring : No

See more

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

This Part Fits Following 2009 Ford Expedition Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, Max Eddie Bauer, Max King Ranch, Max Limited, XLT	Molded Coolant Hose	Fuel Type: FLEX, GAS	Heater - Inlet Assembly

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Related HVAC Parts