Home

1993 Ford Explorer

My Vehicle:

1993 Ford Explorer Radiator Coolant Hose

We have found 9 Radiator Coolant Hose for

1993 Ford Explorer

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25478

Gates Radiator Coolant Hose 25478 - Lower

Position: Lower

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 17
Inside Diameter 1 : 1.5

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT Flexible Coolant Hose (Standard) Fuel Type: GAS - Transmission Control Type: Automatic Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT	Flexible Coolant Hose (Standard)	Fuel Type: GAS - Transmission Control Type: Automatic	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71532

1993 Ford Explorer Radiator Coolant Hose DY 71532

Dayco Radiator Coolant Hose 71532 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, Sport, XL, 4x4, Base, Eddie Bauer, XLT Curved Radiator Hose Transmission Control Type: Automatic Lower

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Limited, Sport, XL, 4x4, Base, Eddie Bauer, XLT	Curved Radiator Hose	Transmission Control Type: Automatic	Lower

Part Interchange

ACDelco	22215M
Atlas	MC213
BMW	11.53.1.716.642
BMW	11.53.1.716.642C
CARQUEST	21623
Duralast	B71532
Ford	F27A-8B273-PA
Ford	F27A-8B273-PB
Ford	F2TZ-8286-B
Ford	F07Z-8286-A
Ford	F17A-8B273-NA
Ford	F07A-8B273-AC
Freshstart	470
Gates	21623
Goodyear	61617
Mazda	ZZL2-15-185
Motorcraft	KM2003
NAPA	8341

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25480

1993 Ford Explorer Radiator Coolant Hose ZO 25480

Gates Radiator Coolant Hose 25480 - Lower

Position: Lower

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : 1.5

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT Flexible Coolant Hose (Standard) Fuel Type: GAS - Transmission Control Type: Standard Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT	Flexible Coolant Hose (Standard)	Fuel Type: GAS - Transmission Control Type: Standard	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71534

1993 Ford Explorer Radiator Coolant Hose DY 71534

Dayco Radiator Coolant Hose 71534 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, XLT, 4x4, Base, Eddie Bauer, Sport, XL w/A.C., w/Extra Cool - Curved Radiator Hose Transmission Control Type: Standard Upper

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Limited, XLT, 4x4, Base, Eddie Bauer, Sport, XL	w/A.C., w/Extra Cool - Curved Radiator Hose	Transmission Control Type: Standard	Upper

Part Interchange

ACDelco	22255M
CARQUEST	21897
Duralast	D71534
Ford	F17A-8B274-MA
Ford	F1TZ-8260-A
Ford	F27A-8B274-UA
Ford	F0TZ-8260-A
Ford	F07A-8B274-CC
Freshstart	467
Gates	21897
Goodyear	61614
Goodyear	61613
MasterPro	21897
Mazda	ZZL1-15-186
Motorcraft	KM1940
Motorcraft	KM1823
NAPA	8587

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71280

1993 Ford Explorer Radiator Coolant Hose DY 71280

Dayco Radiator Coolant Hose 71280 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 12 3/4
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 XLT, 4x4, Base, Eddie Bauer, Limited, Sport, XL Curved Radiator Hose Transmission Control Type: Standard Lower

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	XLT, 4x4, Base, Eddie Bauer, Limited, Sport, XL	Curved Radiator Hose	Transmission Control Type: Standard	Lower

Part Interchange

ACDelco	22229M
Atlas	MC181
CARQUEST	21736
Duralast	C71280
Ford	F07A-8B273-UB
Ford	F07A-8B273-UA
Ford	F07Z-8286-B
Ford	F07A-8286-CC
Ford	F07A-8B273-CC
Ford	F27A-8B273-RB
Ford	F9-3J59475
Ford	F27A-8B273-TC
Ford	F27A-8B273-TB
Ford	F07A-8286-B
Ford	F0TZ-8286-B
Ford	E8TZ-8286-E
Ford	E67A-8B273-CB
Ford	E87A-8B273-GA
Ford	E67A-8B273-CC
Ford	E87A-8B273-JA
Freshstart	469
Gates	21736
Gates	21614
Goodyear	61416
Goodyear	61615
MasterPro	21736
Mazda	ZZL10-15-185
Motorcraft	KM1827
Motorcraft	KM1751
Motorcraft	KM1565
NAPA	8332
NAPA	8427
Pirelli	41416

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21623

1993 Ford Explorer Radiator Coolant Hose ZO 21623

Gates Radiator Coolant Hose 21623 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.6
Inside Diameter 1 : 1.46
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Automatic Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT	Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Automatic	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71531

1993 Ford Explorer Radiator Coolant Hose DY 71531

Dayco Radiator Coolant Hose 71531 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Eddie Bauer, Sport, XL, Base, 4x4, Limited, XLT w/o A.C., w/o Extra Cool - Curved Radiator Hose Transmission Control Type: Automatic, Standard Upper

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Eddie Bauer, Sport, XL, Base, 4x4, Limited, XLT	w/o A.C., w/o Extra Cool - Curved Radiator Hose	Transmission Control Type: Automatic, Standard	Upper

Part Interchange

ACDelco	22255M
ACDelco	24468L
Atlas	MC212
CARQUEST	22681
CARQUEST	21897
Duralast	E71531
Ford	F0TZ-8260-B
Ford	F09Z-8260-B
Ford	F17A-8B274-LA
Ford	F29A-8B274-SA
Ford	F09A-8B274-BE
Ford	F27A-8B274-TA
Ford	F19A-8B274-SA
Ford	F07A-8B274-AC
Ford	F09A-8B274-BD
Freshstart	468
Gates	21897
Gates	22681
Goodyear	61613
Goodyear	61614
Mazda	ZZL0-15-186
Motorcraft	KM1825
Motorcraft	KM1824
NAPA	8587
NAPA	9314

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21736

1993 Ford Explorer Radiator Coolant Hose ZO 21736

Gates Radiator Coolant Hose 21736 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.2
Inside Diameter 1 : 1.44
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Standard Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT	Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Standard	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21897

1993 Ford Explorer Radiator Coolant Hose ZO 21897

Gates Radiator Coolant Hose 21897 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.38
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 4x4, Base, Eddie Bauer, Limited, Sport, XL, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1993 Ford Explorer Radiator Coolant Hose

Gates Radiator Coolant Hose 25478 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71532 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25480 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71534 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71280 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21623 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71531 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21736 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21897 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X