Home

2015 Ford Explorer

My Vehicle:

2015 Ford Explorer Radiator Coolant Hose

We have found 11 Radiator Coolant Hose for

2015 Ford Explorer

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72639

Dayco Radiator Coolant Hose 72639 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 24 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 7/8
End 2 Inside Diameter : 1 1/2
End 2 Outside Diameter : 1 7/8
End 3 Inside Diameter : 5/8
End 3 Outside Diameter : 5/8
End 4 Inside Diameter : 5/8
End 4 Outside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hoses are made with knitted reinforcement and all synthetic EPDM rubber construction providing the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT w/Tow Pkg. - Curved Radiator Hose Drive Type: FWD Lower
Part Interchange
ACDelco 27008X
CARQUEST 23643
Duralast E72639
Ford BB5Z-8286-B
Ford BB5Z-8286-H
Ford BB53-8B273-BD
Ford 8A8Z-8286-A
Ford 8A83-8B273-AB
Gates 23643
Goodyear 66549
Motorcraft KM5216
Motorcraft KM4996
NAPA 16339
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	w/Tow Pkg. - Curved Radiator Hose	Drive Type: FWD	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72489

2015 Ford Explorer Radiator Coolant Hose DY 72489

Dayco Radiator Coolant Hose 72489 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Position
3.5L V6 Base, Limited, Sport, XLT Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.5L V6	Base, Limited, Sport, XLT	Curved Radiator Hose	Upper

Part Interchange

ACDelco	26657X
ACDelco	27187X
CARQUEST	23544
Duralast	E72489
Ford	8G1Z-8260-A
Ford	BB53-8B274-AC
Ford	8G13-8B274-AC
Ford	BB5Z-8260-E
Ford	BB5Z-8260-A
Gates	24381
Gates	23544
Goodyear	66135
Goodyear	60859
Motorcraft	KM5214
Motorcraft	KM4974
NAPA	16268

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24381

2015 Ford Explorer Radiator Coolant Hose ZO 24381

Gates Radiator Coolant Hose 24381 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 36.01
Inside Diameter 1 : 1.46
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72488

2015 Ford Explorer Radiator Coolant Hose DY 72488

Dayco Radiator Coolant Hose 72488 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 24 1/2
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT w/o Tow Pkg. - Curved Radiator Hose Drive Type: FWD Lower

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	w/o Tow Pkg. - Curved Radiator Hose	Drive Type: FWD	Lower

Part Interchange

ACDelco	27193X
ACDelco	26656X
CARQUEST	23542
Duralast	E72488
Ford	BB5Z-8286-A
Ford	BB53-8286-AF
Ford	BB5Z-8286-G
Ford	8G1Z-8286-B
Ford	8G13-8B273-AB
Ford	8G1Z-8286-A
Gates	23542
Gates	24408
Goodyear	66136
Motorcraft	KM5215
Motorcraft	KM-5247
NAPA	16267

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24441

2015 Ford Explorer Radiator Coolant Hose ZO 24441

Gates Radiator Coolant Hose 24441 - Lower - Radiator To Connector

Position: Lower - Radiator To Connector

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.5
Number of Branches : 1
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.32
Inside Diameter 3 : .715
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT W/P.T.O. - Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	W/P.T.O. - Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Connector

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24408

2015 Ford Explorer Radiator Coolant Hose ZO 24408

Gates Radiator Coolant Hose 24408 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 29.61
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT W/O P.T.O.; W/O Oil Cooler - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	W/O P.T.O.; W/O Oil Cooler - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23675

2015 Ford Explorer Radiator Coolant Hose ZO 23675

Gates Radiator Coolant Hose 23675 - Lower - Connector To Engine

Position: Lower - Connector To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.5
Inside Diameter 1 : 1.47
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT Molded Coolant Hose Fuel Type: GAS Lower - Connector To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower - Connector To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24417

2015 Ford Explorer Radiator Coolant Hose ZO 24417

Gates Radiator Coolant Hose 24417 - Lower - Radiator To Connector

Position: Lower - Radiator To Connector

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : 1.32
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT W/O P.T.O. - Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	W/O P.T.O. - Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Connector

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24418

2015 Ford Explorer Radiator Coolant Hose ZO 24418

Gates Radiator Coolant Hose 24418 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 29.125
Number of Branches : 2
Inside Diameter 1 : 1.52
Inside Diameter 2 : 1.52
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT W/O P.T.O.; W/Oil Cooler - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	W/O P.T.O.; W/Oil Cooler - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24490

2015 Ford Explorer Radiator Coolant Hose ZO 24490

Gates Radiator Coolant Hose 24490 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.7
Number of Branches : 2
Inside Diameter 1 : 1.31
Inside Diameter 2 : 1.25
Inside Diameter 3 : .38

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24423

2015 Ford Explorer Radiator Coolant Hose ZO 24423

Gates Radiator Coolant Hose 24423 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30
Number of Branches : 1
Inside Diameter 1 : 1.51
Inside Diameter 2 : 1.51
Inside Diameter 3 : .78
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Ford Explorer Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport, XLT W/P.T.O. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	27008X
CARQUEST	23643
Duralast	E72639
Ford	BB5Z-8286-B
Ford	BB5Z-8286-H
Ford	BB53-8B273-BD
Ford	8A8Z-8286-A
Ford	8A83-8B273-AB
Gates	23643
Goodyear	66549
Motorcraft	KM5216
Motorcraft	KM4996
NAPA	16339

My Vehicle:

2015 Ford Explorer Radiator Coolant Hose

Dayco Radiator Coolant Hose 72639 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72489 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24381 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72488 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24441 - Lower - Radiator To Connector

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24408 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23675 - Lower - Connector To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24417 - Lower - Radiator To Connector

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24418 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24490 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24423 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X