2004 Ford F-350 Super Duty Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72256

Dayco Radiator Coolant Hose 72256 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Position
6.0L V8 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT Curved Radiator Hose Upper
Part Interchange
ACDelco 22474M
CARQUEST 22779
Duralast E72256
Ford 3C34-8B274-AH
Ford 3C34-8B274-AG
Freshstart 62733
Gates 22779
Goodyear 60879
Goodyear 62733
Motorcraft KM4783
NAPA 9414
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.0L V8	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22779

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22779

Gates Radiator Coolant Hose 22779 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.5
Inside Diameter 1 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72026

2004 Ford F-350 Super Duty Radiator Coolant Hose DY 72026

Dayco Radiator Coolant Hose 72026 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Position
5.4L V8 King Ranch, Lariat, XL, XLT Curved Radiator Hose Upper
6.8L V10 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
5.4L V8	King Ranch, Lariat, XL, XLT	Curved Radiator Hose	Upper
6.8L V10	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	24400L
ACDelco	24401L
CARQUEST	22431
CARQUEST	22429
Duralast	E72026
Ford	F81A-8B274-BB
Ford	F81A-8B274-AC
Ford	F81A-8B274-BC
Ford	F81Z-8260-BA
Ford	YC35-8B274-AE
Ford	F81Z-8260-AB
Ford	F81Z-8260-AA
Ford	YC35-8B274-BE
Ford	YC35-8B274-BD
Freshstart	62356
Freshstart	62352
Gates	22429
Gates	22431
Goodyear	62352
Goodyear	62356
Motorcraft	KM4352
Motorcraft	KM4350
NAPA	9064
NAPA	9062

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22429

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22429

Gates Radiator Coolant Hose 22429 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.6
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 XL, King Ranch, Lariat, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	XL, King Ranch, Lariat, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22431

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22431

Gates Radiator Coolant Hose 22431 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.9
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.8L V10 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT W/O Stripped Chassis - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.8L V10	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	W/O Stripped Chassis - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72255

2004 Ford F-350 Super Duty Radiator Coolant Hose DY 72255

Dayco Radiator Coolant Hose 72255 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28-1/2
End 1 Inside Diameter : 2
End 2 Inside Diameter : 2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Position
6.0L V8 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT Curved Radiator Hose Lower
Part Interchange
Duralast E72255
Ford 3C34-8B273-AJ
Freshstart 62734
Goodyear 62734
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.0L V8	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24405

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 24405

Gates Radiator Coolant Hose 24405 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.95
Inside Diameter 1 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.8L V10 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT W/Stripped Chassis - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.8L V10	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	W/Stripped Chassis - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22780

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22780

Gates Radiator Coolant Hose 22780 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34.1
Inside Diameter 1 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: DIESEL Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: DIESEL	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22430

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22430

Gates Radiator Coolant Hose 22430 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 39.5
Number of Branches : 2
Inside Diameter 1 : 1.72
Inside Diameter 2 : 1.72
Inside Diameter 3 : .73
Inside Diameter 4 : .73
Inside Diameter 4 : 19
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 XL, King Ranch, Lariat, XLT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	XL, King Ranch, Lariat, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72027

2004 Ford F-350 Super Duty Radiator Coolant Hose DY 72027

Dayco Radiator Coolant Hose 72027 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 27 1/2
End 1 Inside Diameter : 1 3/4
End 1 Outside Diameter : 2 1/8
End 2 Inside Diameter : 1 3/4
End 2 Outside Diameter : 2 1/8
End 3 Inside Diameter : 3/4
End 4 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 2004 Ford F-350 Super Duty Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	King Ranch, Lariat, XL, XLT	w/Oil Cooler - Curved Radiator Hose	Drive Type: 4WD	Lower
6.8L V10	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	Cut to Fit - Curved Radiator Hose		Lower

Part Interchange

ACDelco	26380X
ACDelco	20374S
CARQUEST	22432
CARQUEST	22430
Duralast	E72027
Ford	F81Z-8286-AA
Ford	F81Z-8286-AD
Ford	YC35-8B273-AF
Ford	YC35-8B273-BE
Ford	F81A-8B273-BC
Ford	F81A-8B273-BB
Ford	F81A-8B273-AC
Gates	22432
Gates	22430
Goodyear	62845
Motorcraft	KM4515
Motorcraft	KM4347
NAPA	9065
NAPA	9063

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22432

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 22432

Gates Radiator Coolant Hose 22432 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 35.18
Number of Branches : 2
Inside Diameter 1 : 1.72
Inside Diameter 2 : 1.81
Inside Diameter 3 : .73
Inside Diameter 4 : .81
Inside Diameter 4 : 21
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.8L V10 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT W/O Stripped Chassis - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.8L V10	Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	W/O Stripped Chassis - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24500

2004 Ford F-350 Super Duty Radiator Coolant Hose ZO 24500

Gates Radiator Coolant Hose 24500 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 41.3
Number of Branches : 2
Inside Diameter 1 : 1.75
Inside Diameter 2 : 1.75
Inside Diameter 3 : .75
Inside Diameter 4 : .75
Inside Diameter 4 : 19

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.8L V10 Harley-Davidson Edition, King Ranch, Lariat, XL, XLT W/Stripped Chassis - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	22474M
CARQUEST	22779
Duralast	E72256
Ford	3C34-8B274-AH
Ford	3C34-8B274-AG
Freshstart	62733
Gates	22779
Goodyear	60879
Goodyear	62733
Motorcraft	KM4783
NAPA	9414

Duralast	E72255
Ford	3C34-8B273-AJ
Freshstart	62734
Goodyear	62734

My Vehicle:

2004 Ford F-350 Super Duty Radiator Coolant Hose

Dayco Radiator Coolant Hose 72256 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22779 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72026 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22429 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22431 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72255 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24405 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22780 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22430 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72027 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22432 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24500 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X