2003 Ford Focus HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18322

Gates HVAC Heater Hose 18322 - Water Pump To Intake Manifold

Position: Water Pump To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.2
Inside Diameter 1 : .36
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Water Pump To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Water Pump To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87634

2003 Ford Focus HVAC Heater Hose DY 87634

Dayco HVAC Heater Hose 87634 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SVT, High, LX, Mid, SE, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Pipe To Thermostat
Part Interchange
ACDelco 14090S
ACDelco 14260S
CARQUEST 19156
CARQUEST 18749
Duralast C87634
Ford YS4Z-18472-BA
Freshstart 4433
Gates 19156
Gates 18749
Goodyear 63091
NAPA 11156
NAPA 10749
V&W 303634
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	SVT, High, LX, Mid, SE, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Pipe To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 72086

2003 Ford Focus HVAC Heater Hose DY 72086

Dayco HVAC Heater Hose 72086 - Coolant Reservoir, Filler Reservoir To Radiator

Position: Coolant Reservoir, Filler Reservoir To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 22
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 13/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Bottom Hose - Curved Radiator Hose Coolant Reservoir, Filler Reservoir To Radiator
Part Interchange
ACDelco 18171L
CARQUEST 19153
Duralast E72086
Ford 98AB-18K289-CC
Ford YS4Z-8K289-CB
Ford 2M5Z-8K289-AA
Ford 1M51-18K289-AA
Ford 1M51-8K289-AA
Gates 19153
NAPA 11153
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Bottom Hose - Curved Radiator Hose	Coolant Reservoir, Filler Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 19276

2003 Ford Focus HVAC Heater Hose ZO 19276

Gates HVAC Heater Hose 19276 - Pipe-1 To Thermostat

Position: Pipe-1 To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.75
Inside Diameter 1 : .61
Inside Diameter 2 : .78
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Pipe-1 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Pipe-1 To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80414

2003 Ford Focus HVAC Heater Hose DY 80414

Dayco HVAC Heater Hose 80414 - Heater Outlet (Right)

Position: Heater Outlet (Right)

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 25
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 90? Molded Coolant Hose Heater Outlet (Right)

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	90? Molded Coolant Hose	Heater Outlet (Right)

Part Interchange

ACDelco	18127L
ACDelco	18136L
ACDelco	18156L
ACDelco	16451M
ACDelco	18128L
CARQUEST	19860
CARQUEST	28477
Datsun/Nissan	92400-0B010
Datsun/Nissan	92400-0B000
Duralast	E80414
Ford	2M5Z-18K359-AD
Ford	YS4Z-18K359-JA
Ford	F3XY-18472-A
Ford	1M5Z-18K359-AA
Ford	F3XY-18472-B
Ford	1M51-18K359-AA
Freshstart	4204
Gates	19657
Gates	19699
Gates	19860
Gates	19660
Gates	28477
General Motors	22731576
General Motors	15280438
Goodyear	63924
Honda	79725-S87-A00
NAPA	11860
NAPA	11699
NAPA	9818
NAPA	11657
NAPA	11660
Pirelli	43924

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87900

2003 Ford Focus HVAC Heater Hose DY 87900

Dayco HVAC Heater Hose 87900 - Heater To Tee

Position: Heater To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : Y
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.3L L4 LX, SE, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Heater To Tee
Part Interchange
Duralast E87900
Ford 4S4Z-18K359-AA
Ford 4S41-18K359-AA
Ford 3S4Z-18K359-AA
Ford 3S41-18K359-AF
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	LX, SE, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19156

2003 Ford Focus HVAC Heater Hose ZO 19156

Gates HVAC Heater Hose 19156 - Connector To Thermostat

Position: Connector To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.4
Inside Diameter 1 : .63
Inside Diameter 2 : .71
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Connector To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX, SE, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Connector To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87008

2003 Ford Focus HVAC Heater Hose DY 87008

Dayco HVAC Heater Hose 87008 - Coolant Reservoir, Filler Reservoir To Radiator

Position: Coolant Reservoir, Filler Reservoir To Radiator

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 23/64
End 1 Outside Diameter : 21/32
End 2 Inside Diameter : 23/64
End 2 Outside Diameter : 21/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Top Hose - Small I.D. Heater Hose Coolant Reservoir, Filler Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Top Hose - Small I.D. Heater Hose	Coolant Reservoir, Filler Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87796

2003 Ford Focus HVAC Heater Hose DY 87796

Dayco HVAC Heater Hose 87796 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 19 5/32
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Pipe To Heater
Part Interchange
ACDelco 18173L
CARQUEST 19155
Duralast E87796
Ford YS41-18C266-BA
Ford YS4Z-18472-CA
Ford 2M5Z-18472-AD
Ford 1M51-18K579-AA
Ford 1M51-18K576-AA
Gates 19155
Motorcraft KH149
NAPA 11155
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19153

2003 Ford Focus HVAC Heater Hose ZO 19153

Gates HVAC Heater Hose 19153 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25
Inside Diameter 1 : .61
Inside Diameter 2 : .84
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 W/5/8" I.D. Hose - Molded Heater Hose Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	W/5/8" I.D. Hose - Molded Heater Hose	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 19155

2003 Ford Focus HVAC Heater Hose ZO 19155

Gates HVAC Heater Hose 19155 - Heater To Connector

Position: Heater To Connector

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Heater To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Heater To Connector

Part Name: HVAC Heater HoseBrand: GatesPart#: 18321

2003 Ford Focus HVAC Heater Hose ZO 18321

Gates HVAC Heater Hose 18321 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.4
Inside Diameter 1 : .36
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 W/3/8" I.D. Hose - Molded Heater Hose Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	W/3/8" I.D. Hose - Molded Heater Hose	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 19746

2003 Ford Focus HVAC Heater Hose ZO 19746

Gates HVAC Heater Hose 19746 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.6
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87974

2003 Ford Focus HVAC Heater Hose DY 87974

Dayco HVAC Heater Hose 87974 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 35 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86828

2003 Ford Focus HVAC Heater Hose DY 86828

Dayco HVAC Heater Hose 86828 - Water Pump To Intake Manifold

Position: Water Pump To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Water Pump To Intake Manifold
Part Interchange
ACDelco 16388M
ACDelco 16205M
CARQUEST 18322
CARQUEST 18286
Duralast E86828
Ford YS4Z-18472-KA
Gates 18286
Gates 18322
Goodyear 64486
NAPA 10322
NAPA 10286
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Water Pump To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88463

2003 Ford Focus HVAC Heater Hose DY 88463

Dayco HVAC Heater Hose 88463 - Thermostat To Heater

Position: Thermostat To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 29
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : Y
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.3L L4 LX, SE, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Thermostat To Heater
Part Interchange
Duralast E88463
Ford 3S41-18K579-AJ
Ford 4S4Z-18472-AA
Ford 4S41-18K579-AA
Ford 3S4Z-18472-AA
Motorcraft KH365
Motorcraft KH340
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	LX, SE, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Thermostat To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19154

2003 Ford Focus HVAC Heater Hose ZO 19154

Gates HVAC Heater Hose 19154 - Pipe-1 To Heater

Position: Pipe-1 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 53.3
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Heater Hose Cylinder Head Type: DOHC - Fuel Type: GAS Pipe-1 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Molded Heater Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Pipe-1 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88424

2003 Ford Focus HVAC Heater Hose DY 88424

Dayco HVAC Heater Hose 88424 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 18
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
End 3 Inside Diameter : 23/64
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18190L
CARQUEST 22570
Duralast E88424
Ford YS4Z-18472-JA
Ford 2M51-18K579-BA
Ford 2M5Z-18472-BD
Gates 22570
NAPA 9203
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 22570

2003 Ford Focus HVAC Heater Hose ZO 22570

Gates HVAC Heater Hose 22570 - Heater To Engine

Position: Heater To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.88
Number of Branches : 1
Inside Diameter 1 : .72
Inside Diameter 2 : .72
Inside Diameter 3 : .38
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 High, LX, Mid, SE, SVT, ZTS, ZTW, ZX3, ZX5 Molded Coolant Hose Cylinder Head Type: SOHC - Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14090S
ACDelco	14260S
CARQUEST	19156
CARQUEST	18749
Duralast	C87634
Ford	YS4Z-18472-BA
Freshstart	4433
Gates	19156
Gates	18749
Goodyear	63091
NAPA	11156
NAPA	10749
V&W	303634

ACDelco	18171L
CARQUEST	19153
Duralast	E72086
Ford	98AB-18K289-CC
Ford	YS4Z-8K289-CB
Ford	2M5Z-8K289-AA
Ford	1M51-18K289-AA
Ford	1M51-8K289-AA
Gates	19153
NAPA	11153

Duralast	E87900
Ford	4S4Z-18K359-AA
Ford	4S41-18K359-AA
Ford	3S4Z-18K359-AA
Ford	3S41-18K359-AF

ACDelco	18173L
CARQUEST	19155
Duralast	E87796
Ford	YS41-18C266-BA
Ford	YS4Z-18472-CA
Ford	2M5Z-18472-AD
Ford	1M51-18K579-AA
Ford	1M51-18K576-AA
Gates	19155
Motorcraft	KH149
NAPA	11155

ACDelco	16388M
ACDelco	16205M
CARQUEST	18322
CARQUEST	18286
Duralast	E86828
Ford	YS4Z-18472-KA
Gates	18286
Gates	18322
Goodyear	64486
NAPA	10322
NAPA	10286

Duralast	E88463
Ford	3S41-18K579-AJ
Ford	4S4Z-18472-AA
Ford	4S41-18K579-AA
Ford	3S4Z-18472-AA
Motorcraft	KH365
Motorcraft	KH340

ACDelco	18190L
CARQUEST	22570
Duralast	E88424
Ford	YS4Z-18472-JA
Ford	2M51-18K579-BA
Ford	2M5Z-18472-BD
Gates	22570
NAPA	9203

My Vehicle:

2003 Ford Focus HVAC Heater Hose

Gates HVAC Heater Hose 18322 - Water Pump To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87634 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 72086 - Coolant Reservoir, Filler Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19276 - Pipe-1 To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80414 - Heater Outlet (Right)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87900 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19156 - Connector To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87008 - Coolant Reservoir, Filler Reservoir To Radiator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87796 - Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19153 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19155 - Heater To Connector

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18321 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19746 - Heater To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87974 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86828 - Water Pump To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88463 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19154 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88424 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22570 - Heater To Engine

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?