1986 Ford LTD HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 70001

Dayco HVAC Heater Hose 70001 - Heater To Valve

Position: Heater To Valve

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 3 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
2.3L L4 Base, Brougham Curved Radiator Hose Heater To Valve

Engine	Sub Model	Notes	Position
2.3L L4	Base, Brougham	Curved Radiator Hose	Heater To Valve

Part Interchange

ACDelco	14605S
ACDelco	14207S
AMC	3167899
AMC	926139
Atlas	642210
AutoZone	C0338
Autopar	RH111
Beck/Arnley	142-5941
Beck/Arnley	142-0801
Beck/Arnley	142-5962
CARQUEST	18160
CARQUEST	20338
Chrysler	3176458
Chrysler	4638427
Conoco	MH6
Duralast	A70001
Ford	D0TZ-8548-B
Ford	C90Z-8597-A
Ford	C2OZ-8597-A
Ford	D2PZ-8597-A
Ford	C2OZ-8597-B
Ford	D2TE-8548-DA
Ford	F32Z-8597-BA
Ford	D2TE-8548-DB
Ford	F32Z-8597-B
Freshstart	3015
Gates	20571
Gates	20338
Gates	18160
General Motors	15708634
General Motors	10087632
General Motors	10042686
General Motors	14100667
General Motors	25529685
General Motors	25524596
General Motors	24500908
General Motors	25505973
General Motors	15708636
General Motors	3760119
Goodyear	63641
Goodyear	BP641
Honda	79771-STX-A00
Lazorlite	L34-8597
MasterPro	20338
Mopar	BH1056
Motorcraft	KM1020
Motorcraft	KM4709
Motorcraft	KM614
Motorcraft	KM2370
Motorcraft	KM3
NAPA	10160
NAPA	7296
Navistar	169192-R1
Pirelli	43641
Pirelli	H276
Pirelli	MR788
Pirelli	H265
Subaru (cars)	80761-5041
Texaco	CB4
Toyota	87245-0C280
Toyota	16283-42010
Toyota	16261-88361
Toyota	16261-88380
Toyota	16261-64070
Toyota	16261-63010
Toyota	16261-88360
Uniroyal	CH127
Uniroyal	BP2

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87635

Dayco HVAC Heater Hose 87635 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	Small I.D. Heater Hose	Heater To Pipe-2
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	Small I.D. Heater Hose	Heater To Pipe-2

Part Interchange
ACDelco 16043M
CARQUEST 18750
Duralast C87635
Freshstart 4518
Gates 18750
General Motors 10175930
Goodyear 63245
Kia 97312-2K200
NAPA 10750
V&W 303635
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 20618

Gates HVAC Heater Hose 20618 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, Brougham Cut to fit - Molded Coolant Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, Brougham	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87612

Dayco HVAC Heater Hose 87612 - Pipe To Intake Manifold, Heater To Intake Manifold

Position: Pipe To Intake Manifold, Heater To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
2.3L L4 Base, Brougham w/o A.C. - Small I.D. Heater Hose Pipe To Intake Manifold, Heater To Intake Manifold
Part Interchange
ACDelco 14006S
CARQUEST 18080
Duralast B87612
Ford F8RZ-8548-EC
Ford 98BB-8548-DA
Ford F8RZ-8548-DA
Freshstart 3035
Gates 18080
Goodyear 63030
Motorcraft KM4403
Motorcraft KM4346
NAPA 10080
V&W 303612
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	Base, Brougham	w/o A.C. - Small I.D. Heater Hose	Pipe To Intake Manifold, Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 18750

Gates HVAC Heater Hose 18750 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/O Police Pkg. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/O Police Pkg. - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88350

Dayco HVAC Heater Hose 88350 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
3.8L V6 Brougham, Base w/o A.C. - Small I.D. Heater Hose Heater To Water Pump
Part Interchange
ACDelco 14173S
CARQUEST 19600
Duralast B88350
Ford E4DZ-18472-A
Freshstart 4355
Gates 19600
Goodyear 63092
NAPA 11600
V&W 304350
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	Brougham, Base	w/o A.C. - Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

Gates HVAC Heater Hose 28474 - Heater To Pipe, Heater To Pipe-1

Position: Heater To Pipe, Heater To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Base, Brougham	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/Auto. Temp. Control; W/O Police Pkg.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/Auto. Temp. Control; W/O Police Pkg.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19600

Gates HVAC Heater Hose 19600 - Heater To Valve, Heater To Water Pump

Position: Heater To Valve, Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, Brougham W/O A.C.; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve, Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, Brougham	W/O A.C.; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve, Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18080

Gates HVAC Heater Hose 18080 - Heater To Intake Manifold, Pipe To Intake Manifold

Position: Heater To Intake Manifold, Pipe To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, Brougham Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Intake Manifold, Pipe To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	Base, Brougham	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold, Pipe To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 19606

Gates HVAC Heater Hose 19606 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, Brougham W/A.C.; W/O Auto. Temp. Control - Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, Brougham	W/A.C.; W/O Auto. Temp. Control - Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

Dayco HVAC Heater Hose 80402 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
5.0L V8 Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX 90? Molded Coolant Hose Heater Hose

Engine	Sub Model	Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88358

Dayco HVAC Heater Hose 88358 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	w/A.C., w/o Auto Temp. Control, w/o Police Pkg. - Small I.D. Heater Hose	Heater To Pipe-1
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	w/A.C., w/o Auto Temp. Control, w/o Police Pkg. - Small I.D. Heater Hose	Heater To Pipe-1

Part Interchange

ACDelco	16514M
ACDelco	18118L
CARQUEST	19913
CARQUEST	19611
Datsun/Nissan	92410-JA000
Datsun/Nissan	92410-JA00A
Datsun/Nissan	92410-ZX00A
Duralast	E88358
Gates	19913
Gates	19611
General Motors	1636469
General Motors	14034306
General Motors	1644881
General Motors	19129866
General Motors	1641782
Goodyear	64318
NAPA	11611
NAPA	11913
V&W	304358

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80416

Dayco HVAC Heater Hose 80416 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
5.0L V8 Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX w/Police Pkg. - 90? Molded Coolant Hose Heater To Pipe-1
Part Interchange
ACDelco 18158L
Atlas MH-76
CARQUEST 28479
Duralast E80416
Ford F58H-18K579-AA
Freshstart 4206
Gates 28479
General Motors 15708627
Goodyear 63936
Mopar H0063936
NAPA 9820
Pirelli 43936
Suzuki 17871-86Z00
Suzuki 17872-86Z00
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	w/Police Pkg. - 90? Molded Coolant Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28479

Gates HVAC Heater Hose 28479 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 40
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 36
Arm Length 2 : 914.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/Police Pkg.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/Police Pkg.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87611

Dayco HVAC Heater Hose 87611 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Position
3.8L V6 Base, Brougham w/o Auto Temp. Control, Protective Sleeve Req'd. - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18007L
CARQUEST 18078
Chrysler 4462549
Duralast E87611
Gates 18078
NAPA 10078
V&W 303611
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	Base, Brougham	w/o Auto Temp. Control, Protective Sleeve Req'd. - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19611

Gates HVAC Heater Hose 19611 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1986 Ford LTD Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/A.C.; W/O Auto. Temp. Control; W/O Police Pkg.; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
5.8L V8	Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX	W/A.C.; W/O Auto. Temp. Control; W/O Police Pkg.; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18078

Gates HVAC Heater Hose 18078 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 41.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, Brougham Protective sleeve required; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, Brougham	Protective sleeve required; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

Gates HVAC Heater Hose 28411 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1986 Ford LTD Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 Base, Brougham Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16043M
CARQUEST	18750
Duralast	C87635
Freshstart	4518
Gates	18750
General Motors	10175930
Goodyear	63245
Kia	97312-2K200
NAPA	10750
V&W	303635

ACDelco	14006S
CARQUEST	18080
Duralast	B87612
Ford	F8RZ-8548-EC
Ford	98BB-8548-DA
Ford	F8RZ-8548-DA
Freshstart	3035
Gates	18080
Goodyear	63030
Motorcraft	KM4403
Motorcraft	KM4346
NAPA	10080
V&W	303612

ACDelco	14173S
CARQUEST	19600
Duralast	B88350
Ford	E4DZ-18472-A
Freshstart	4355
Gates	19600
Goodyear	63092
NAPA	11600
V&W	304350

ACDelco	18158L
Atlas	MH-76
CARQUEST	28479
Duralast	E80416
Ford	F58H-18K579-AA
Freshstart	4206
Gates	28479
General Motors	15708627
Goodyear	63936
Mopar	H0063936
NAPA	9820
Pirelli	43936
Suzuki	17871-86Z00
Suzuki	17872-86Z00

ACDelco	18007L
CARQUEST	18078
Chrysler	4462549
Duralast	E87611
Gates	18078
NAPA	10078
V&W	303611

My Vehicle:

1986 Ford LTD HVAC Heater Hose

Dayco HVAC Heater Hose 70001 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87635 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20618 - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87612 - Pipe To Intake Manifold, Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18750 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88350 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Heater To Pipe, Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19600 - Heater To Valve, Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18080 - Heater To Intake Manifold, Pipe To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19606 - Heater To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater Hose

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80416 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28479 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87611 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18078 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X