Home

2012 Freightliner Sprinter 2500

My Vehicle:

2012 Freightliner Sprinter 2500 HVAC Heater Hose

We have found 5 HVAC Heater Hose for

2012 Freightliner Sprinter 2500

Part Name: HVAC Heater HoseBrand: GatesPart#: 12189

Gates HVAC Heater Hose 12189 - Reservoir (Lower)

Position: Reservoir (Lower)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.19
Inside Diameter 1 : .75
Inside Diameter 2 : .91
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Freightliner Sprinter 2500 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base Molded Heater Hose Fuel Type: DIESEL Reservoir (Lower)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base	Molded Heater Hose	Fuel Type: DIESEL	Reservoir (Lower)

Part Name: HVAC Heater HoseBrand: GatesPart#: 12192

2012 Freightliner Sprinter 2500 HVAC Heater Hose ZO 12192

Gates HVAC Heater Hose 12192 - Pipe To Pipe

Position: Pipe To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.4
Inside Diameter 1 : .69
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Freightliner Sprinter 2500 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base Molded Heater Hose Fuel Type: DIESEL Pipe To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base	Molded Heater Hose	Fuel Type: DIESEL	Pipe To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 12191

2012 Freightliner Sprinter 2500 HVAC Heater Hose ZO 12191

Gates HVAC Heater Hose 12191 - Cooler To Engine

Position: Cooler To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12
Inside Diameter 1 : .69
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Freightliner Sprinter 2500 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base Molded Heater Hose Fuel Type: DIESEL Cooler To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base	Molded Heater Hose	Fuel Type: DIESEL	Cooler To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 12195

2012 Freightliner Sprinter 2500 HVAC Heater Hose ZO 12195

Gates HVAC Heater Hose 12195

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.02
Inside Diameter 1 : .69
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Freightliner Sprinter 2500 Engines.
Engine Sub Model Notes Fit Notes
3.0L V6 Base Exhaust Gas Recirculation Outlet - Molded Heater Hose Fuel Type: DIESEL
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
3.0L V6	Base	Exhaust Gas Recirculation Outlet - Molded Heater Hose	Fuel Type: DIESEL

Part Name: HVAC Heater HoseBrand: GatesPart#: 12190

2012 Freightliner Sprinter 2500 HVAC Heater Hose ZO 12190

Gates HVAC Heater Hose 12190 - Valve-3 To Oil Cooler

Position: Valve-3 To Oil Cooler

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.64
Inside Diameter 1 : .69
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Freightliner Sprinter 2500 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base Molded Heater Hose Fuel Type: DIESEL Valve-3 To Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2012 Freightliner Sprinter 2500 HVAC Heater Hose

Gates HVAC Heater Hose 12189 - Reservoir (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12192 - Pipe To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12191 - Cooler To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12195

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12190 - Valve-3 To Oil Cooler

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X