Home

1995 GMC Jimmy

My Vehicle:

1995 GMC Jimmy HVAC Heater Hose

We have found 4 HVAC Heater Hose for

1995 GMC Jimmy

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86114

Dayco HVAC Heater Hose 86114 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1995 GMC Jimmy Engines.
Engine Sub Model Notes Position
4.3L V6 Base, SL, SLE, SLS, SLT Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18214L
CARQUEST 19224
Duralast E86114
Gates 19224
General Motors 15668786
NAPA 11224
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, SL, SLE, SLS, SLT	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86113

1995 GMC Jimmy HVAC Heater Hose DY 86113

Dayco HVAC Heater Hose 86113 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1995 GMC Jimmy Engines.
Engine Sub Model Notes Position
4.3L V6 Base, SL, SLE, SLS, SLT Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 18213L
CARQUEST 19223
Duralast E86113
Gates 19223
General Motors 15652878
NAPA 11223
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, SL, SLE, SLS, SLT	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19224

1995 GMC Jimmy HVAC Heater Hose ZO 19224

Gates HVAC Heater Hose 19224 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.2
Inside Diameter 1 : .62
Inside Diameter 2 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 GMC Jimmy Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, SL, SLE, SLS, SLT Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, SL, SLE, SLS, SLT	Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19223

1995 GMC Jimmy HVAC Heater Hose ZO 19223

Gates HVAC Heater Hose 19223 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 29.5
Inside Diameter 1 : .63
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 GMC Jimmy Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, SL, SLE, SLS, SLT Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18214L
CARQUEST	19224
Duralast	E86114
Gates	19224
General Motors	15668786
NAPA	11224

ACDelco	18213L
CARQUEST	19223
Duralast	E86113
Gates	19223
General Motors	15652878
NAPA	11223

My Vehicle:

1995 GMC Jimmy HVAC Heater Hose

Dayco HVAC Heater Hose 86114 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86113 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19224 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19223 - Heater To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X