631-302-9490

8AM To 6PM (EST)
Monday to Friday

Secure Checkout with

Selected Vehicle: 2000 Honda Accord Change

Shopping Kart 0 item (s)
Home
>
2000 Honda Accord

My Vehicle:

Search Filter:
Engine
    x
  • Check All Engines
  • 2.3L L4
  • 3.0L V6
  • Uncheck All Engine(s)
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Air Control Valve To Pipe-2
  • Engine To Heater Control Valve
  • Heater Control Valve To Heater Inlet
  • Heater Outlet
  • Heater To Engine
  • Heater To Valve
  • Housing To Pipe
  • Housing To Pipe-1
  • Pipe To Throttle Body
  • Thermostat To Pipe-1
  • Valve To Engine
  • Uncheck All Position(s)

2000 Honda Accord HVAC Heater Hose

We have found 15 HVAC Heater Hose for
2000 Honda Accord 2000 Honda Accord
Part Name: HVAC Heater HoseBrand: GatesPart#: 18193
2000 Honda Accord HVAC Heater Hose ZO 18193

Gates HVAC Heater Hose 18193 - Housing To Pipe-1

ZO
Housing To Pipe-1

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 8.7
  • Inside Diameter 1 : .28
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$4.04
24
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    3.0L V6Coupe, EX, LXMolded Heater HoseFuel Type: GASHousing To Pipe-1
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 86503
2000 Honda Accord HVAC Heater Hose DY 86503

Dayco HVAC Heater Hose 86503 - Pipe To Throttle Body

DY
Pipe To Throttle Body

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 5
  • End 1 Inside Diameter : 9/32
  • End 2 Inside Diameter : 9/32
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$6.48
4
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    3.0L V6EX, LXCut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater HosePipe To Throttle Body
  • Part Interchange
    ACDelco14621S
    ACDelco14019S
    ACDelco14636S
    CARQUEST18191
    CARQUEST18201
    CARQUEST18176
    Datsun/Nissan14055-D4205
    Datsun/Nissan14055-12G02
    Datsun/Nissan14056-30R19
    DuralastB86503
    Freshstart4413
    Gates18191
    Gates18201
    Gates18176
    General Motors12595603
    Goodyear63142
    Honda19528-P8A-A00
    Honda19528-P07-A00
    Honda19522-P8A-A00
    Honda19522-R70-A00
    NAPA10191
    NAPA10201
    NAPA10176
    V&W302503
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 18399
2000 Honda Accord HVAC Heater Hose ZO 18399

Gates HVAC Heater Hose 18399 - Thermostat To Pipe-1

ZO
Thermostat To Pipe-1

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 7.3
  • Inside Diameter 1 : .29
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$6.71
3
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    2.3L L4DX, EX, EX-R, LX, SEMolded Heater HoseFuel Type: GASThermostat To Pipe-1
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 86824
2000 Honda Accord HVAC Heater Hose DY 86824

Dayco HVAC Heater Hose 86824 - Housing To Pipe

DY
Housing To Pipe

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 7
  • End 1 Inside Diameter : 1/4
  • End 1 Outside Diameter : 17/32
  • End 2 Inside Diameter : 1/4
  • End 2 Outside Diameter : 17/32
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$7.08
5
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    3.0L V6EX, LXSmall I.D. Heater HoseHousing To Pipe
  • Part Interchange
    ACDelco14638S
    ACDelco14008S
    CARQUEST18193
    CARQUEST18100
    DuralastB86824
    Gates18100
    Gates18193
    Honda19523-P8A-A00
    MazdaFE87-13-116
    NAPA10193
    NAPA10100
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400
2000 Honda Accord HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Heater To Valve

DY
Heater To Valve

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 6
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$10.75
27
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    3.0L V6EX, LX90? Molded Coolant HoseHeater To Valve
  • Part Interchange
    ACDelco14228S
    ACDelco14160S
    ACDelco14229S
    ACDelco14237S
    ACDelco20227S
    ACDelco14405S
    ACDelco14148S
    ACDelco14243S
    AtlasMH-60
    CARQUEST19005
    CARQUEST19333
    CARQUEST28466
    CARQUEST21738
    CARQUEST19035
    CARQUEST21862
    CARQUEST21739
    CARQUEST21742
    Chrysler3918266
    Chrysler3918200
    Chrysler39182000
    Datsun/Nissan14056-88G05
    Datsun/Nissan21306-16A00
    Datsun/Nissan14055-57Y11
    Datsun/Nissan14056-77A01
    DuralastB80400
    FordF1DE-8A506-AA
    FordD4AZ-18472-G
    FordE6AE-8A527-AA
    FordF1DE-8A527-AA
    FordE6DZ-8A506-A
    FordE6DZ-8A527-A
    FordE9SE-8597-B
    FordE8SZ-8597-B
    FordE6AE-8A506-AA
    FordF40Y-18472-A
    FordF5RZ-8290-A
    FordE6AE-8A506-BB
    FordF6DH-18D334-AD
    FordF6DZ-18472-AB
    FordF6DH-18D334-AB
    Freshstart4318
    Freshstart4101
    Gates28466
    Gates21739
    Gates21742
    Gates21862
    Gates21738
    Gates19005
    Gates19333
    Gates19645
    Gates19035
    General Motors10215999
    General Motors10197652
    General Motors10171104
    General Motors10284263
    General Motors55036950
    General Motors15708635
    General Motors15713591
    General Motors15553626
    General Motors12603761
    General Motors35232953
    General Motors12590013
    General Motors3523265
    General Motors10021318
    General Motors10145098
    General Motors10135305
    General Motors10038502
    General Motors21030565
    General Motors15984157
    General Motors22685822
    General Motors25662102
    General Motors10145118
    General Motors30013103
    General Motors25525213
    General Motors22704430
    General Motors22704428
    Goodyear63052
    Goodyear63806
    Honda79118-S3V-A00
    Honda19508-P72-000
    Honda19504-PEO-010
    Honda19504-PE0-010
    Honda79118-S3V-A01
    Honda79117-S3V-A00
    Honda79722-SD5-A00
    Honda19508-PE0-010
    Isuzu8-94384-326-3
    Isuzu8-94384-326-2
    KiaK01315421
    LazorliteL34-8589
    MazdaKJ01-15-261
    MotorcraftKM1809
    MotorcraftKM1748
    NAPA11035
    NAPA9807
    NAPA11333
    NAPA11005
    Pirelli43806
    Toyota16261-74010
    Toyota16261-74030
    Toyota16264-74030
    Toyota87245-3D520
    Volvo Cars3M5H-18K580-AB
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19699
2000 Honda Accord HVAC Heater Hose ZO 19699
2000 Honda Accord HVAC Heater Hose ZO 19699

Gates HVAC Heater Hose 19699 - Heater Outlet

ZO
Heater Outlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 21.8
  • Inside Diameter 1 : .74
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$11.18
135
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    3.0L V6Coupe, EX, LXMolded Heater HoseFuel Type: GASHeater Outlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80414
2000 Honda Accord HVAC Heater Hose DY 80414

Dayco HVAC Heater Hose 80414 - Heater To Engine

DY
Heater To Engine

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 25
  • End 1 Inside Diameter : 3/4
  • End 2 Inside Diameter : 3/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$12.23
11
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    3.0L V6EX, LX90? Molded Coolant HoseHeater To Engine
  • Part Interchange
    ACDelco18127L
    ACDelco18136L
    ACDelco18156L
    ACDelco16451M
    ACDelco18128L
    CARQUEST19860
    CARQUEST28477
    Datsun/Nissan92400-0B010
    Datsun/Nissan92400-0B000
    DuralastE80414
    Ford2M5Z-18K359-AD
    FordYS4Z-18K359-JA
    FordF3XY-18472-A
    Ford1M5Z-18K359-AA
    FordF3XY-18472-B
    Ford1M51-18K359-AA
    Freshstart4204
    Gates19657
    Gates19699
    Gates19860
    Gates19660
    Gates28477
    General Motors22731576
    General Motors15280438
    Goodyear63924
    Honda79725-S87-A00
    NAPA11860
    NAPA11699
    NAPA9818
    NAPA11657
    NAPA11660
    Pirelli43924
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80404
2000 Honda Accord HVAC Heater Hose DY 80404

Dayco HVAC Heater Hose 80404 - Valve To Engine

DY
Valve To Engine

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 24
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$12.29
15
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    3.0L V6EX, LX90? Molded Coolant HoseValve To Engine
  • Part Interchange
    ACDelco18367L
    ACDelco18240L
    ACDelco18287L
    ACDelco18151L
    ACDelco18393L
    ACDelco18231L
    Acura79721-SR3-J30
    AtlasMH-64
    CARQUEST28470
    CARQUEST19532
    CARQUEST19142
    CARQUEST19120
    CARQUEST19103
    CARQUEST19458
    Chrysler55037228
    Chrysler4662215
    Chrysler55036924
    DuralastE80404
    Ford5L84-18K579-AH
    FordF6DZ-18472A
    FordF50Y-18472-B
    FordF50H-18K579-AC
    Ford99BB-18C553-AC
    FordF50Y-18472-A
    FordF80H-18K580-AC
    FordF6DZ-18472-GA
    FordF50H-18K580-AA
    FordF80Z-18472-AB
    FordF87H-18472-CA
    Freshstart4105
    Gates19103
    Gates19142
    Gates19120
    Gates19458
    Gates28470
    Gates19532
    General Motors10427571
    General Motors10317834
    General Motors10021566
    General Motors10294247
    General Motors10415189
    General Motors10400424
    General Motors52362096
    Goodyear63824
    Honda79725-SCV-A00
    Hyundai97321-25160
    Hyundai97321-26100
    Hyundai97322-26100
    MazdaGK3J-61-24XD
    Mazda3K3J-61-24XD
    NAPA11142
    NAPA11120
    NAPA11103
    NAPA11458
    NAPA11532
    NAPA9811
    Pirelli43824
    Toyota87245-42200
    Toyota87245-3D480
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 18502
2000 Honda Accord HVAC Heater Hose ZO 18502

Gates HVAC Heater Hose 18502 - Air Control Valve To Pipe-2

ZO
Air Control Valve To Pipe-2

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 15.4
  • Inside Diameter 1 : .29
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$12.71
15
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    2.3L L4DX, EX, EX-R, LX, SEMolded Heater HoseFuel Type: GASAir Control Valve To Pipe-2
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87771
2000 Honda Accord HVAC Heater Hose DY 87771

Dayco HVAC Heater Hose 87771 - Valve To Engine

DY
Valve To Engine

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 17
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$13.06
11
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    2.3L L4DX, EX, EX-R, LX, SESmall I.D. Heater HoseValve To Engine
  • Part Interchange
    ACDelco16134M
    CARQUEST19044
    DuralastD87771
    Gates19044
    Goodyear63517
    Honda79721-S84-A00
    NAPA11044
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19047
2000 Honda Accord HVAC Heater Hose ZO 19047
2000 Honda Accord HVAC Heater Hose ZO 19047

Gates HVAC Heater Hose 19047 - Engine To Heater Control Valve

ZO
Engine To Heater Control Valve

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 22.2
  • Inside Diameter 1 : .63
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$13.60
117
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    3.0L V6Coupe, EX, LXMolded Heater HoseFuel Type: GASEngine To Heater Control Valve
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87684
2000 Honda Accord HVAC Heater Hose DY 87684

Dayco HVAC Heater Hose 87684 - Heater Outlet

DY
Heater Outlet

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 19
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$15.15
13
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesPosition
    2.3L L4DX, EX, EX-R, LX, SESmall I.D. Heater HoseHeater Outlet
  • Part Interchange
    ACDelco18104L
    ACDelco18045L
    ACDelco18409L
    CARQUEST18840
    CARQUEST19575
    CARQUEST19045
    Chrysler55057236AC
    DuralastE87684
    Freshstart4448
    Gates19516
    Gates19575
    Gates19045
    Gates18840
    Goodyear63175
    Honda79725S84A00
    Honda79721-TA0-A01
    MazdaZZL015184
    NAPA11045
    NAPA11575
    NAPA11516
    NAPA10840
    NAPA18390L
    V&W303684
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19044
2000 Honda Accord HVAC Heater Hose ZO 19044
2000 Honda Accord HVAC Heater Hose ZO 19044

Gates HVAC Heater Hose 19044 - Engine To Heater Control Valve

ZO
Engine To Heater Control Valve

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 22
  • Inside Diameter 1 : .63
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$17.13
198
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    2.3L L4DX, EX, EX-R, LX, SEMolded Heater HoseFuel Type: GASEngine To Heater Control Valve
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19045
2000 Honda Accord HVAC Heater Hose ZO 19045
2000 Honda Accord HVAC Heater Hose ZO 19045

Gates HVAC Heater Hose 19045 - Heater Outlet

ZO
Heater Outlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 31
  • Inside Diameter 1 : .63
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$18.26
169
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    2.3L L4DX, EX, EX-R, LX, SEMolded Heater HoseFuel Type: GASHeater Outlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 28411
2000 Honda Accord HVAC Heater Hose ZO 28411
2000 Honda Accord HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater Control Valve To Heater Inlet

ZO
Heater Control Valve To Heater Inlet

Description:

  • Straight Heater Hose Standard

Part Specifications:

  • Centerline Length : 50
  • Centerline Length : 15.24
  • Centerline Length : 600
  • Inside Diameter 1 : .625
  • Working Pressure : 60
  • Weight Per Length : 11.70 lbs./Carton
    • See more

Features:

  • Premium hose constructed for long service life.

    • Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
    • Good resistance to high temperatures for extended periods of time
    • Similar to SAE 20R3 Class D-2
    • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

    CAUTION: Do not use for fuel or oil transfer applications.

    Gates Powering Progress

2
New
$55.78
228
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2000 Honda Accord Engines.
    EngineSub ModelNotesFit NotesPosition
    2.3L L4DX, EX, EX-R, LX, SECut to Length, 3" - Straight Heater Hose (Standard)Fuel Type: GASHeater Control Valve To Heater Inlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.