2006 Honda Accord HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19553

Gates HVAC Heater Hose 19553 - Heater Control Valve To Heater Inlet

Position: Heater Control Valve To Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2006 Honda Accord Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Molded Heater Hose	Fuel Type: GAS	Heater Control Valve To Heater Inlet
3.0L V6	EX, Hybrid, LX	Molded Heater Hose	Fuel Type: GAS	Heater Control Valve To Heater Inlet

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18395

2006 Honda Accord HVAC Heater Hose ZO 18395

Gates HVAC Heater Hose 18395 - Water Housing To Throttle Body

Position: Water Housing To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .29
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 EX, Hybrid, LX Molded Heater Hose Fuel Type: GAS Water Housing To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	EX, Hybrid, LX	Molded Heater Hose	Fuel Type: GAS	Water Housing To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18397

2006 Honda Accord HVAC Heater Hose ZO 18397

Gates HVAC Heater Hose 18397 - Rotary Air Control Valve Outlet To Pipe

Position: Rotary Air Control Valve Outlet To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 5
Inside Diameter 1 : .29
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Molded Heater Hose Fuel Type: GAS Rotary Air Control Valve Outlet To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Molded Heater Hose	Fuel Type: GAS	Rotary Air Control Valve Outlet To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19549

2006 Honda Accord HVAC Heater Hose ZO 19549

Gates HVAC Heater Hose 19549 - Engine To Heater Control Valve

Position: Engine To Heater Control Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Molded Heater Hose Fuel Type: GAS Engine To Heater Control Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Molded Heater Hose	Fuel Type: GAS	Engine To Heater Control Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87625

2006 Honda Accord HVAC Heater Hose DY 87625

Dayco HVAC Heater Hose 87625 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 EX, Hybrid, LX Small I.D. Heater Hose Fuel Type: ELECTRIC/GAS Heater To Valve

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	EX, Hybrid, LX	Small I.D. Heater Hose	Fuel Type: ELECTRIC/GAS	Heater To Valve

Part Interchange

ACDelco	14563S
ACDelco	14130S
ACDelco	14256S
ACDelco	14258S
ACDelco	14083S
CARQUEST	18041
CARQUEST	19190
CARQUEST	19152
CARQUEST	18925
CARQUEST	18738
Duralast	B87625
Ford	XR3E-8A582-AC
Freshstart	4492
Gates	19152
Gates	18925
Gates	19190
Gates	18041
Gates	18738
Goodyear	64106
Goodyear	63219
Honda	79722-SDR-A00
Mitsubishi	MR465186
NAPA	11190
NAPA	10738
NAPA	10925
NAPA	10041
NAPA	11152
Toyota	16265-15020
V&W	303625

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18048

2006 Honda Accord HVAC Heater Hose ZO 18048

Gates HVAC Heater Hose 18048 - Auxiliary Water Pump To Valve

Position: Auxiliary Water Pump To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 EX, Hybrid, LX Molded Heater Hose Fuel Type: ELECTRIC/GAS Auxiliary Water Pump To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	EX, Hybrid, LX	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Auxiliary Water Pump To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87659

2006 Honda Accord HVAC Heater Hose DY 87659

Dayco HVAC Heater Hose 87659 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Small I.D. Heater Hose Heater To Valve
3.0L V6 EX, Hybrid, LX Small I.D. Heater Hose Fuel Type: GAS Heater To Valve

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Small I.D. Heater Hose		Heater To Valve
3.0L V6	EX, Hybrid, LX	Small I.D. Heater Hose	Fuel Type: GAS	Heater To Valve

Part Interchange

ACDelco	14593S
ACDelco	14526S
ACDelco	14100S
CARQUEST	18792
CARQUEST	18143
Duralast	B87659
Ford	1L2Z-18472-KC
Gates	18792
Gates	18143
Gates	19553
General Motors	15773599
General Motors	15984158
Honda	79722-SDA-A00
Honda	79723-SHJ-A00
Motorcraft	KH123
NAPA	10792
NAPA	10143
NAPA	11553
V&W	303659

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88386

2006 Honda Accord HVAC Heater Hose DY 88386

Dayco HVAC Heater Hose 88386 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Cut to Fit - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18125L
ACDelco 16482M
CARQUEST 19644
Duralast E88386
Gates 19885
Gates 19644
NAPA 11644
NAPA 11885
V&W 304386
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Cut to Fit - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80414

2006 Honda Accord HVAC Heater Hose DY 80414

Dayco HVAC Heater Hose 80414 - Heater To Pipe

Position: Heater To Pipe

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 25
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 EX, Hybrid, LX 90? Molded Coolant Hose Fuel Type: GAS Heater To Pipe

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	EX, Hybrid, LX	90? Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe

Part Interchange

ACDelco	18127L
ACDelco	18136L
ACDelco	18156L
ACDelco	16451M
ACDelco	18128L
CARQUEST	19860
CARQUEST	28477
Datsun/Nissan	92400-0B010
Datsun/Nissan	92400-0B000
Duralast	E80414
Ford	2M5Z-18K359-AD
Ford	YS4Z-18K359-JA
Ford	F3XY-18472-A
Ford	1M5Z-18K359-AA
Ford	F3XY-18472-B
Ford	1M51-18K359-AA
Freshstart	4204
Gates	19657
Gates	19699
Gates	19860
Gates	19660
Gates	28477
General Motors	22731576
General Motors	15280438
Goodyear	63924
Honda	79725-S87-A00
NAPA	11860
NAPA	11699
NAPA	9818
NAPA	11657
NAPA	11660
Pirelli	43924

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87759

2006 Honda Accord HVAC Heater Hose DY 87759

Dayco HVAC Heater Hose 87759 - Pipe To Valve

Position: Pipe To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18 3/4
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Small I.D. Heater Hose Pipe To Valve
Part Interchange
ACDelco 16479M
ACDelco 18098L
Duralast E87759
Ford F6DH-185K580-BE
Ford F6DZ-18472-B
Ford F6DZ-18K580-B
Ford YF1H-18K580-BA
Gates 19549
Gates 19029
Honda 79721-SDA-A00
NAPA 11549
NAPA 11029
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Small I.D. Heater Hose	Pipe To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

2006 Honda Accord HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Valve To Engine

Position: Valve To Engine

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 EX, Hybrid, LX 90? Molded Coolant Hose Fuel Type: GAS Valve To Engine

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	EX, Hybrid, LX	90? Molded Coolant Hose	Fuel Type: GAS	Valve To Engine

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19885

2006 Honda Accord HVAC Heater Hose ZO 19885

Gates HVAC Heater Hose 19885 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, LX, LX Special Edition, Value Package	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2006 Honda Accord HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Water Housing To Pipe-1

Position: Water Housing To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, LX, LX Special Edition, Value Package Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Water Housing To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18125L
ACDelco	16482M
CARQUEST	19644
Duralast	E88386
Gates	19885
Gates	19644
NAPA	11644
NAPA	11885
V&W	304386

ACDelco	16479M
ACDelco	18098L
Duralast	E87759
Ford	F6DH-185K580-BE
Ford	F6DZ-18472-B
Ford	F6DZ-18K580-B
Ford	YF1H-18K580-BA
Gates	19549
Gates	19029
Honda	79721-SDA-A00
NAPA	11549
NAPA	11029

My Vehicle:

2006 Honda Accord HVAC Heater Hose

Gates HVAC Heater Hose 19553 - Heater Control Valve To Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18395 - Water Housing To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18397 - Rotary Air Control Valve Outlet To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19549 - Engine To Heater Control Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87625 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18048 - Auxiliary Water Pump To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87659 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88386 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80414 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87759 - Pipe To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19885 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Water Housing To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X