2016 Honda Accord HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 12164

Gates HVAC Heater Hose 12164 - Throttle Body Outlet

Position: Throttle Body Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 5.79
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 EX-L, Touring Molded Heater Hose Fuel Type: GAS Throttle Body Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	EX-L, Touring	Molded Heater Hose	Fuel Type: GAS	Throttle Body Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12161

2016 Honda Accord HVAC Heater Hose ZO 12161

Gates HVAC Heater Hose 12161 - Throttle Body Inlet

Position: Throttle Body Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.59
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX-L, LX, Sport, EX, LX-S, Touring Molded Heater Hose Fuel Type: GAS Throttle Body Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX-L, LX, Sport, EX, LX-S, Touring	Molded Heater Hose	Fuel Type: GAS	Throttle Body Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12162

2016 Honda Accord HVAC Heater Hose ZO 12162

Gates HVAC Heater Hose 12162 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.37
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 EX-L, Touring Molded Heater Hose Fuel Type: GAS Pipe To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	EX-L, Touring	Molded Heater Hose	Fuel Type: GAS	Pipe To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 12163

2016 Honda Accord HVAC Heater Hose ZO 12163

Gates HVAC Heater Hose 12163 - Housing To Pipe

Position: Housing To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.69
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 EX-L, Touring Molded Heater Hose Fuel Type: GAS Housing To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	EX-L, Touring	Molded Heater Hose	Fuel Type: GAS	Housing To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 12157

2016 Honda Accord HVAC Heater Hose ZO 12157

Gates HVAC Heater Hose 12157 - Transmission Oil Cooler Outlet

Position: Transmission Oil Cooler Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.67
Inside Diameter 1 : .5
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX-L, LX, Sport, EX, LX-S, Touring W/CVT - Molded Heater Hose Fuel Type: GAS Transmission Oil Cooler Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX-L, LX, Sport, EX, LX-S, Touring	W/CVT - Molded Heater Hose	Fuel Type: GAS	Transmission Oil Cooler Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 12154

2016 Honda Accord HVAC Heater Hose ZO 12154

Gates HVAC Heater Hose 12154 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.63
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX-L, LX, Sport, EX, LX-S, Touring Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX-L, LX, Sport, EX, LX-S, Touring	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87804

2016 Honda Accord HVAC Heater Hose DY 87804

Dayco HVAC Heater Hose 87804 - Heater Inlet, Heater Outlet

Position: Heater Inlet, Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 29
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Position
2.4L L4 EX, EX-L, LX, LX-S, Sport, Touring Small I.D. Heater Hose Heater Inlet, Heater Outlet

Engine	Sub Model	Notes	Position
2.4L L4	EX, EX-L, LX, LX-S, Sport, Touring	Small I.D. Heater Hose	Heater Inlet, Heater Outlet

Part Interchange

ACDelco	18179L
ACDelco	18358L
Chrysler	55116603AE
Duralast	E87804
Ford	YL84-18K580-BF
Ford	YL8Z-18472-DA
Gates	19436
Honda	79721-T2F-A00
Honda	79730-T2F-A00
Mazda	EG21-61-24XB
Motorcraft	KH125
NAPA	11436
NAPA	11164
Toyota	87245-08010

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 12158

2016 Honda Accord HVAC Heater Hose ZO 12158

Gates HVAC Heater Hose 12158 - Transmission Oil Cooler Inlet

Position: Transmission Oil Cooler Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.87
Inside Diameter 1 : .5
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2016 Honda Accord Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX-L, LX, Sport, EX, LX-S, Touring W/CVT - Molded Heater Hose Fuel Type: GAS Transmission Oil Cooler Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2016 Honda Accord HVAC Heater Hose

Gates HVAC Heater Hose 12164 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12161 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12162 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12163 - Housing To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12157 - Transmission Oil Cooler Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12154 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87804 - Heater Inlet, Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12158 - Transmission Oil Cooler Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2016 Honda Accord HVAC Heater Hose

Gates HVAC Heater Hose 12164 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12161 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12162 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12163 - Housing To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12157 - Transmission Oil Cooler Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12154 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87804 - Heater Inlet, Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12158 - Transmission Oil Cooler Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X