Home

2004 Hyundai XG350

My Vehicle:

2004 Hyundai XG350 HVAC Heater Hose

We have found 7 HVAC Heater Hose for

2004 Hyundai XG350

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86815

Dayco HVAC Heater Hose 86815 - Throttle Body Outlet

Position: Throttle Body Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 9/32
End 2 Inside Diameter : 9/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Position
3.5L V6 Base, L Small I.D. Heater Hose Throttle Body Outlet
Part Interchange
ACDelco 14016S
CARQUEST 18124
Chrysler 4746700
Duralast B86815
Gates 18124
NAPA 10124
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Base, L	Small I.D. Heater Hose	Throttle Body Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18263

2004 Hyundai XG350 HVAC Heater Hose ZO 18263

Gates HVAC Heater Hose 18263 - Throttle Body Outlet

Position: Throttle Body Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, L Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, L	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87650

2004 Hyundai XG350 HVAC Heater Hose DY 87650

Dayco HVAC Heater Hose 87650 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Position
3.5L V6 Base, L Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.5L V6	Base, L	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16050M
CARQUEST	18773
Chrysler	4540175
Duralast	D87650
Ford	F4BZ-18472-B
Gates	18773
General Motors	25525792
General Motors	22659275
General Motors	10417434
Hyundai	97322-39000
Hyundai	97322-2D100
Hyundai	97312-39000
NAPA	10773
V&W	303650

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18021

2004 Hyundai XG350 HVAC Heater Hose ZO 18021

Gates HVAC Heater Hose 18021 - Throttle Body Inlet

Position: Throttle Body Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, L Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, L	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18773

2004 Hyundai XG350 HVAC Heater Hose ZO 18773

Gates HVAC Heater Hose 18773 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, L Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, L	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87792

2004 Hyundai XG350 HVAC Heater Hose DY 87792

Dayco HVAC Heater Hose 87792 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Position
3.5L V6 Base, L Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
3.5L V6	Base, L	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	18101L
ACDelco	16108M
ACDelco	16362M
ACDelco	18102L
ACDelco	18481L
ACDelco	18047L
CARQUEST	19038
CARQUEST	18844
CARQUEST	18948
Chrysler	5058858AC
Chrysler	5264398
Chrysler	5058858AD
Duralast	E87792
Gates	19038
Gates	12056
Gates	19037
Gates	18844
Gates	18948
Gates	19350
General Motors	32002245
Hyundai	97312-38100
Hyundai	97321-39000
Hyundai	97322-38100
Hyundai	97312-2E700
Hyundai	97311-39000
Hyundai	95321-38100
Mitsubishi	MB527995
NAPA	11350
NAPA	10844
NAPA	11037
NAPA	11038
NAPA	10948

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18842

2004 Hyundai XG350 HVAC Heater Hose ZO 18842

Gates HVAC Heater Hose 18842 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.2
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Hyundai XG350 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, L Cut to fit - Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14016S
CARQUEST	18124
Chrysler	4746700
Duralast	B86815
Gates	18124
NAPA	10124

My Vehicle:

2004 Hyundai XG350 HVAC Heater Hose

Dayco HVAC Heater Hose 86815 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18263 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87650 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18021 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18773 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87792 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18842 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X