631-302-9490

8AM To 6PM (EST)
Monday to Friday

My Vehicle:

Search Filter:
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Heater Inlet
  • Heater Outlet
  • Uncheck All Position(s)

2001 Jeep Cherokee HVAC Heater Hose

We have found 6 HVAC Heater Hose for
2001 Jeep Cherokee 2001 Jeep Cherokee
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80406
2001 Jeep Cherokee HVAC Heater Hose DY 80406

Dayco HVAC Heater Hose 80406 - Heater Outlet

DY
Heater Outlet

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 48
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$15.01
27
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80417
2001 Jeep Cherokee HVAC Heater Hose DY 80417

Dayco HVAC Heater Hose 80417 - Heater Inlet

DY
Heater Inlet

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 48
  • End 1 Inside Diameter : 3/4
  • End 2 Inside Diameter : 3/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$15.35
3
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 87792
2001 Jeep Cherokee HVAC Heater Hose DY 87792

Dayco HVAC Heater Hose 87792 - Heater Outlet

DY
Heater Outlet

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 21 1/4
  • End 1 Inside Diameter : 5/8
  • End 2 Inside Diameter : 5/8
  • Contains Protective Sleeve : Y
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
New
$15.80
13
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 19038
2001 Jeep Cherokee HVAC Heater Hose ZO 19038
2001 Jeep Cherokee HVAC Heater Hose ZO 19038

Gates HVAC Heater Hose 19038 - Heater Outlet

ZO
Heater Outlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 26.4
  • Inside Diameter 1 : .59
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$17.60
148
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: DaycoPart#: 88429
2001 Jeep Cherokee HVAC Heater Hose DY 88429

Dayco HVAC Heater Hose 88429 - Heater Inlet

DY
Heater Inlet

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 26 1/2
  • End 1 Inside Diameter : 3/4
  • End 1 Outside Diameter : 1 3/32
  • End 2 Inside Diameter : 3/4
  • End 2 Outside Diameter : 1 3/32
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
  • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$20.65
15
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
Part Name: HVAC Heater HoseBrand: GatesPart#: 19039
2001 Jeep Cherokee HVAC Heater Hose ZO 19039
2001 Jeep Cherokee HVAC Heater Hose ZO 19039

Gates HVAC Heater Hose 19039 - Heater Inlet

ZO
Heater Inlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 32.9
  • Inside Diameter 1 : .72
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$27.11
179
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price