1999 Jeep TJ HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86121

Dayco HVAC Heater Hose 86121 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Position
2.5L L4 SE Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.5L L4	SE	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	18083L
ACDelco	18095L
ACDelco	16300M
ACDelco	16051M
CARQUEST	18969
CARQUEST	18774
CARQUEST	19004
Chrysler	55056966AA
Chrysler	55056711AC
Chrysler	55036383
Chrysler	5005370AB
Duralast	E86121
Freshstart	4353
Gates	19269
Gates	19004
Gates	18774
Gates	18969
General Motors	15768212
General Motors	22598982
General Motors	14103584
General Motors	22551237
Goodyear	63089
Hyundai	97312-38300
Hyundai	97321-38100
Hyundai	97322-38000
Hyundai	97312-38030
Kia	97311-38100
NAPA	10774
NAPA	10969
NAPA	11269
NAPA	11004
Suzuki	17871-54G10
Suzuki	17872-54G10

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19004

Gates HVAC Heater Hose 19004 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 SE W/Left Hand Drive - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	SE	W/Left Hand Drive - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87792

Dayco HVAC Heater Hose 87792 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Position
4.0L L6 Sahara, Sport Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
4.0L L6	Sahara, Sport	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	18101L
ACDelco	16108M
ACDelco	16362M
ACDelco	18102L
ACDelco	18481L
ACDelco	18047L
CARQUEST	19038
CARQUEST	18844
CARQUEST	18948
Chrysler	5058858AC
Chrysler	5264398
Chrysler	5058858AD
Duralast	E87792
Gates	19038
Gates	12056
Gates	19037
Gates	18844
Gates	18948
Gates	19350
General Motors	32002245
Hyundai	97312-38100
Hyundai	97321-39000
Hyundai	97322-38100
Hyundai	97312-2E700
Hyundai	97311-39000
Hyundai	95321-38100
Mitsubishi	MB527995
NAPA	11350
NAPA	10844
NAPA	11037
NAPA	11038
NAPA	10948

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19038

Gates HVAC Heater Hose 19038 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 26.4
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Fit Notes Position
4.0L L6 Sahara, Sport W/Left Hand Drive - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L L6	Sahara, Sport	W/Left Hand Drive - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19037

Gates HVAC Heater Hose 19037 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 SE W/Left Hand Drive; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	SE	W/Left Hand Drive; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88429

Dayco HVAC Heater Hose 88429 - Valve To Heater

Position: Valve To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 26 1/2
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Position
4.0L L6 Sahara, Sport Small I.D. Heater Hose Valve To Heater
Part Interchange
ACDelco 18330L
ACDelco 18103L
CARQUEST 19039
Duralast E88429
Ford 3C3Z-18472-AA
Gates 19832
Gates 19039
General Motors 22712137
Goodyear 63996
Motorcraft KH439
Motorcraft KH230
NAPA 11832
NAPA 11039
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L L6	Sahara, Sport	Small I.D. Heater Hose	Valve To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19039

Gates HVAC Heater Hose 19039 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 32.9
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Jeep TJ Engines.
Engine Sub Model Notes Fit Notes Position
4.0L L6 Sahara, Sport W/Left Hand Drive - Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

Dayco HVAC Heater Hose 86121 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19004 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87792 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19038 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19037 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88429 - Valve To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19039 - Heater To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18330L
ACDelco	18103L
CARQUEST	19039
Duralast	E88429
Ford	3C3Z-18472-AA
Gates	19832
Gates	19039
General Motors	22712137
Goodyear	63996
Motorcraft	KH439
Motorcraft	KH230
NAPA	11832
NAPA	11039

My Vehicle:

1999 Jeep TJ HVAC Heater Hose

Dayco HVAC Heater Hose 86121 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19004 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87792 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19038 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19037 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88429 - Valve To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19039 - Heater To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X