Home

2011 Kia Optima

My Vehicle:

2011 Kia Optima HVAC Heater Hose

We have found 5 HVAC Heater Hose for

2011 Kia Optima

Part Name: HVAC Heater HoseBrand: GatesPart#: 18540

Gates HVAC Heater Hose 18540 - Oil Cooler Inlet

Position: Oil Cooler Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.8
Inside Diameter 1 : .60
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Kia Optima Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, Hybrid, LX Molded Heater Hose Fuel Type: GAS Oil Cooler Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, Hybrid, LX	Molded Heater Hose	Fuel Type: GAS	Oil Cooler Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18603

2011 Kia Optima HVAC Heater Hose ZO 18603

Gates HVAC Heater Hose 18603 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.01
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Kia Optima Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 EX, SX Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	EX, SX	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18539

2011 Kia Optima HVAC Heater Hose ZO 18539

Gates HVAC Heater Hose 18539 - Engine To Oil Cooler Pipe-2

Position: Engine To Oil Cooler Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.8
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Kia Optima Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, Hybrid, LX Molded Heater Hose Fuel Type: GAS Engine To Oil Cooler Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	EX, Hybrid, LX	Molded Heater Hose	Fuel Type: GAS	Engine To Oil Cooler Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28468

2011 Kia Optima HVAC Heater Hose ZO 28468

Gates HVAC Heater Hose 28468

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 22
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Kia Optima Engines.
Engine Sub Model Notes Fit Notes
2.4L L4 EX, Hybrid, LX Inverter Outlet - 90º Molded Heater Hose Fuel Type: ELECTRIC/GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
2.4L L4	EX, Hybrid, LX	Inverter Outlet - 90º Molded Heater Hose	Fuel Type: ELECTRIC/GAS

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2011 Kia Optima HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Inverter To Radiator Pipe

Position: Inverter To Radiator Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2011 Kia Optima Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 EX, Hybrid, LX Cut to Length, 7 1/2" - Straight Heater Hose (Standard) Fuel Type: ELECTRIC/GAS Inverter To Radiator Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2011 Kia Optima HVAC Heater Hose

Gates HVAC Heater Hose 18540 - Oil Cooler Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18603 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18539 - Engine To Oil Cooler Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28468

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Inverter To Radiator Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X