2004 Lincoln Navigator HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

Gates HVAC Heater Hose 28466 - Tee To Heater Valve

Position: Tee To Heater Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 Base, Ultimate Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Tee To Heater Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, Ultimate	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee To Heater Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87756

2004 Lincoln Navigator HVAC Heater Hose DY 87756

Dayco HVAC Heater Hose 87756 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Position
5.4L V8 Base Small I.D. Heater Hose Heater To Intake Manifold
Part Interchange
ACDelco 14257S
CARQUEST 19193
Duralast C87756
Ford F65Z-18472-BB
Ford F65H-18K580-BA
Ford F65H-18K579-BA
Gates 19193
NAPA 11193
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base	Small I.D. Heater Hose	Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87793

2004 Lincoln Navigator HVAC Heater Hose DY 87793

Dayco HVAC Heater Hose 87793 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Position
5.4L V8 Base Small I.D. Heater Hose Pipe To Heater
Part Interchange
ACDelco 18292L
CARQUEST 19199
Duralast E87793
Ford YL3H-18K579-CB
Gates 19199
Goodyear 64144
NAPA 11199
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base	Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 72444

2004 Lincoln Navigator HVAC Heater Hose DY 72444

Dayco HVAC Heater Hose 72444 - Coolant Reservoir

Position: Coolant Reservoir

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20 3/4
End 1 Inside Diameter : 31/32
End 1 Outside Diameter : 1 5/16
End 2 Inside Diameter : 31/32
End 2 Outside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : Y
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Position
5.4L V8 Base Curved Radiator Hose Coolant Reservoir
Part Interchange
ACDelco 27015X
CARQUEST 23657
Duralast E72444
Ford 6L14-8C315-AA
Ford 6L1Z-8C350-A
Ford 5L1Z-8075-AB
Ford 5L14-8C351-AB
Ford 4L34-8C351-AD
Gates 23657
Motorcraft KM4910
Motorcraft KM4864
NAPA 16350
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base	Curved Radiator Hose	Coolant Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2004 Lincoln Navigator HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Reservoir To Radiator - Overflow

Position: Reservoir To Radiator - Overflow

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 Base, Ultimate Cut to fit - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Radiator - Overflow
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, Ultimate	Cut to fit - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator - Overflow

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2004 Lincoln Navigator HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Intake Manifold To Pipe, Tee To Auxiliary Heater Pipe-2

Position: Intake Manifold To Pipe, Tee To Auxiliary Heater Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Lincoln Navigator Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 Base, Ultimate Cut to fit - Straight Heater Hose (Standard) Fuel Type: GAS Intake Manifold To Pipe, Tee To Auxiliary Heater Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2004 Lincoln Navigator HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Tee To Heater Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87756 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87793 - Pipe To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 72444 - Coolant Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Radiator - Overflow

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Intake Manifold To Pipe, Tee To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14257S
CARQUEST	19193
Duralast	C87756
Ford	F65Z-18472-BB
Ford	F65H-18K580-BA
Ford	F65H-18K579-BA
Gates	19193
NAPA	11193

ACDelco	18292L
CARQUEST	19199
Duralast	E87793
Ford	YL3H-18K579-CB
Gates	19199
Goodyear	64144
NAPA	11199

ACDelco	27015X
CARQUEST	23657
Duralast	E72444
Ford	6L14-8C315-AA
Ford	6L1Z-8C350-A
Ford	5L1Z-8075-AB
Ford	5L14-8C351-AB
Ford	4L34-8C351-AD
Gates	23657
Motorcraft	KM4910
Motorcraft	KM4864
NAPA	16350

My Vehicle:

2004 Lincoln Navigator HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Tee To Heater Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87756 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87793 - Pipe To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 72444 - Coolant Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Radiator - Overflow

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Intake Manifold To Pipe, Tee To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X