1996 Lincoln Town Car HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87604

Dayco HVAC Heater Hose 87604 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Position
4.6L V8 Signature, Anniversary, Base, Cartier, Executive w/Auto Temp. Control - Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
4.6L V8	Signature, Anniversary, Base, Cartier, Executive	w/Auto Temp. Control - Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16004M
CARQUEST	18071
Duralast	D87604
Ford	F5VH-18C266-AA
Ford	YF1Z-18472-AA
Ford	3W7H-18K580-BA
Ford	XF1H-18K579-AA
Ford	F1OY-18472-C
Ford	F1OY-18472-D
Freshstart	4332
Gates	18071
General Motors	25856148
General Motors	10288179
General Motors	15776141
General Motors	22682485
General Motors	22709849
Goodyear	63068
NAPA	10071
Toyota	87245-50360
V&W	303604

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88376

1996 Lincoln Town Car HVAC Heater Hose DY 88376

Dayco HVAC Heater Hose 88376 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Position
4.6L V8 Cartier, Signature, Anniversary, Base, Executive w/Auto Temp. Control - Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
4.6L V8	Cartier, Signature, Anniversary, Base, Executive	w/Auto Temp. Control - Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16155M
ACDelco	14307S
CARQUEST	19727
CARQUEST	19632
Duralast	C88376
Ford	F6AZ-18472-A
Ford	F5AH-18C266-AB
Ford	F8AH-18K579-AC
Ford	F8VH-18K579-AB
Ford	F8AZ-18472-AA
Ford	F8VH-181K579AC
Ford	1W7H-18K579-AB
Ford	1W1H-18K579-AA
Ford	F8VH-18K579-AC
Freshstart	4347
Gates	19632
Gates	19727
Goodyear	63083
NAPA	11727
NAPA	11632
V&W	304376

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88442

1996 Lincoln Town Car HVAC Heater Hose DY 88442

Dayco HVAC Heater Hose 88442 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Position
4.6L V8 Anniversary, Base, Cartier, Signature, Executive Small I.D. Heater Hose Intake Manifold To Heater
Part Interchange
ACDelco 14269S
CARQUEST 19764
Duralast C88442
Ford 5W73-18K579-AA
Ford 3W7Z-18472-AE
Ford 3W7H-18K579-AB
Gates 19764
Motorcraft KH275
NAPA 11764
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	Anniversary, Base, Cartier, Signature, Executive	Small I.D. Heater Hose	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19764

1996 Lincoln Town Car HVAC Heater Hose ZO 19764

Gates HVAC Heater Hose 19764 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Anniversary, Base, Cartier, Executive, Signature Molded Heater Hose Fuel Type: GAS Heater To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Anniversary, Base, Cartier, Executive, Signature	Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 18070

1996 Lincoln Town Car HVAC Heater Hose ZO 18070

Gates HVAC Heater Hose 18070 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Anniversary, Base, Cartier, Executive, Signature Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Anniversary, Base, Cartier, Executive, Signature	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1996 Lincoln Town Car HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Anniversary, Base, Cartier, Executive, Signature Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	Anniversary, Base, Cartier, Executive, Signature	Cut to Length, 9" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1996 Lincoln Town Car HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Lincoln Town Car Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 Anniversary, Base, Cartier, Executive, Signature Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1996 Lincoln Town Car HVAC Heater Hose

Dayco HVAC Heater Hose 87604 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88376 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88442 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19764 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18070 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14269S
CARQUEST	19764
Duralast	C88442
Ford	5W73-18K579-AA
Ford	3W7Z-18472-AE
Ford	3W7H-18K579-AB
Gates	19764
Motorcraft	KH275
NAPA	11764

My Vehicle:

1996 Lincoln Town Car HVAC Heater Hose

Dayco HVAC Heater Hose 87604 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88376 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88442 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19764 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18070 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X