1998 Mazda 626 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86824

Dayco HVAC Heater Hose 86824 - Engine To Intake Manifold

Position: Engine To Intake Manifold

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 1/4
End 1 Outside Diameter : 17/32
End 2 Inside Diameter : 1/4
End 2 Outside Diameter : 17/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Position
2.5L V6 ES, LX Small I.D. Heater Hose Engine To Intake Manifold
Part Interchange
ACDelco 14638S
ACDelco 14008S
CARQUEST 18193
CARQUEST 18100
Duralast B86824
Gates 18100
Gates 18193
Honda 19523-P8A-A00
Mazda FE87-13-116
NAPA 10193
NAPA 10100
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	ES, LX	Small I.D. Heater Hose	Engine To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86500

1998 Mazda 626 HVAC Heater Hose DY 86500

Dayco HVAC Heater Hose 86500 - Throttle Body To Engine

Position: Throttle Body To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 1/4
End 2 Inside Diameter : 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Position
2.5L V6 ES, LX Cut to Fit - Small I.D. Heater Hose Throttle Body To Engine
Part Interchange
ACDelco 14017S
ACDelco 14000S
CARQUEST 18125
CARQUEST 18010
Duralast B86500
Gates 18125
Gates 18010
General Motors 302650
General Motors 12556443
NAPA 10125
NAPA 10010
Toyota 17343-76010
V&W 302500
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	ES, LX	Cut to Fit - Small I.D. Heater Hose	Throttle Body To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18100

1998 Mazda 626 HVAC Heater Hose ZO 18100

Gates HVAC Heater Hose 18100 - Exhaust Gas Recirculation Valve To Thermostat, Reservoir To Intake Manifold

Position: Exhaust Gas Recirculation Valve To Thermostat, Reservoir To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.5
Inside Diameter 1 : .28
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Cut to fit - Molded Heater Hose Fuel Type: GAS Exhaust Gas Recirculation Valve To Thermostat, Reservoir To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	ES, LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Exhaust Gas Recirculation Valve To Thermostat, Reservoir To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 18010

1998 Mazda 626 HVAC Heater Hose ZO 18010

Gates HVAC Heater Hose 18010 - Engine To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve

Position: Engine To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Cut to fit - Molded Heater Hose Fuel Type: GAS Engine To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	ES, LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 18011

1998 Mazda 626 HVAC Heater Hose ZO 18011

Gates HVAC Heater Hose 18011 - Throttle Body To Thermostat, Water Pump Pipe To Throttle Body

Position: Throttle Body To Thermostat, Water Pump Pipe To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 DX, LX Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body To Thermostat, Water Pump Pipe To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	DX, LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body To Thermostat, Water Pump Pipe To Throttle Body

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87773

1998 Mazda 626 HVAC Heater Hose DY 87773

Dayco HVAC Heater Hose 87773 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 22
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Position
2.0L L4 DX, LX Long Hose - Small I.D. Heater Hose Heater Hose
Part Interchange
ACDelco 18085L
Duralast E87773
Ford F32Z-18472-B
Freshstart 4564
Gates 18983
Goodyear 63291
Mazda GA2A-61-211C
NAPA 10983
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	DX, LX	Long Hose - Small I.D. Heater Hose	Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87801

1998 Mazda 626 HVAC Heater Hose DY 87801

Dayco HVAC Heater Hose 87801 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Position
2.5L V6 ES, LX Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 18293L
ACDelco 18091L
CARQUEST 18996
Duralast E87801
Ford 1L2Z-18482-VA
Freshstart 63293
Gates 19282
Gates 18996
Goodyear 63293
Mazda GD7E-61-212
Mazda TA01-61-212A
Motorcraft KH70
NAPA 11282
NAPA 10996
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	ES, LX	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19209

1998 Mazda 626 HVAC Heater Hose ZO 19209

Gates HVAC Heater Hose 19209 - Pipe-1 To Heater

Position: Pipe-1 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Molded Heater Hose Fuel Type: GAS Pipe-1 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	ES, LX	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18269

1998 Mazda 626 HVAC Heater Hose ZO 18269

Gates HVAC Heater Hose 18269 - Reservoir To Pipe-1

Position: Reservoir To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 48.46
Inside Diameter 1 : .28
Inside Diameter 2 : .36
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Molded Heater Hose Fuel Type: GAS Reservoir To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	ES, LX	Molded Heater Hose	Fuel Type: GAS	Reservoir To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87774

1998 Mazda 626 HVAC Heater Hose DY 87774

Dayco HVAC Heater Hose 87774 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Position
2.0L L4 DX, LX Short Hose - Small I.D. Heater Hose Heater Hose
Part Interchange
ACDelco 18085L
ACDelco 16125M
CARQUEST 18997
Duralast E87774
Ford F32Z-18472-A
Gates 18997
Gates 18983
General Motors 96539591
General Motors 20984280
Mazda GA2A-61-212A
NAPA 10997
NAPA 10983
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	DX, LX	Short Hose - Small I.D. Heater Hose	Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18983

1998 Mazda 626 HVAC Heater Hose ZO 18983

Gates HVAC Heater Hose 18983 - Thermostat To Heater

Position: Thermostat To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 26
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 DX, LX Molded Heater Hose Fuel Type: GAS Thermostat To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	DX, LX	Molded Heater Hose	Fuel Type: GAS	Thermostat To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18996

1998 Mazda 626 HVAC Heater Hose ZO 18996

Gates HVAC Heater Hose 18996 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	ES, LX	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 18997

1998 Mazda 626 HVAC Heater Hose ZO 18997

Gates HVAC Heater Hose 18997 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 DX, LX Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	DX, LX	Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

1998 Mazda 626 HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 DX, LX Cut to Length, 14" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	DX, LX	Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1998 Mazda 626 HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-1 To Pipe-2

Position: Pipe-1 To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1998 Mazda 626 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 ES, LX Cut to Length, 10" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-1 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14638S
ACDelco	14008S
CARQUEST	18193
CARQUEST	18100
Duralast	B86824
Gates	18100
Gates	18193
Honda	19523-P8A-A00
Mazda	FE87-13-116
NAPA	10193
NAPA	10100

ACDelco	14017S
ACDelco	14000S
CARQUEST	18125
CARQUEST	18010
Duralast	B86500
Gates	18125
Gates	18010
General Motors	302650
General Motors	12556443
NAPA	10125
NAPA	10010
Toyota	17343-76010
V&W	302500

ACDelco	18085L
Duralast	E87773
Ford	F32Z-18472-B
Freshstart	4564
Gates	18983
Goodyear	63291
Mazda	GA2A-61-211C
NAPA	10983

ACDelco	18293L
ACDelco	18091L
CARQUEST	18996
Duralast	E87801
Ford	1L2Z-18482-VA
Freshstart	63293
Gates	19282
Gates	18996
Goodyear	63293
Mazda	GD7E-61-212
Mazda	TA01-61-212A
Motorcraft	KH70
NAPA	11282
NAPA	10996

My Vehicle:

1998 Mazda 626 HVAC Heater Hose

Dayco HVAC Heater Hose 86824 - Engine To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86500 - Throttle Body To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18100 - Exhaust Gas Recirculation Valve To Thermostat, Reservoir To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18010 - Engine To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18011 - Throttle Body To Thermostat, Water Pump Pipe To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87773 - Heater Hose

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87801 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19209 - Pipe-1 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18269 - Reservoir To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87774 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18983 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18996 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18997 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X