1996 Mazda Millenia HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80413

Dayco HVAC Heater Hose 80413 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Position
2.3L V6 S Short Hose - 90? Molded Coolant Hose Heater Hose

Engine	Sub Model	Notes	Position
2.3L V6	S	Short Hose - 90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	18155L
ACDelco	16359M
ACDelco	16173M
ACDelco	16172M
CARQUEST	19675
CARQUEST	28476
CARQUEST	19674
Chrysler	4767152
Chrysler	4767152AC
Datsun/Nissan	92400-7S010
Duralast	E80413
Ford	3F1H-18K579-BA
Freshstart	4203
Gates	28476
Gates	19831
Gates	19675
Gates	19674
General Motors	96539591
General Motors	96536531
General Motors	22685161
General Motors	3728191
General Motors	25559279
General Motors	25559278
Goodyear	63303
Goodyear	63918
Goodyear	63304
NAPA	11831
NAPA	9817

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28461

1996 Mazda Millenia HVAC Heater Hose ZO 28461

Gates HVAC Heater Hose 28461 - Reservoir To Thermostat

Position: Reservoir To Thermostat

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Fit Notes Position
2.3L V6 S Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Reservoir To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L V6	S	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Reservoir To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80414

1996 Mazda Millenia HVAC Heater Hose DY 80414

Dayco HVAC Heater Hose 80414 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 25
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Position
2.3L V6 S Long Hose - 90? Molded Coolant Hose Heater Hose

Engine	Sub Model	Notes	Position
2.3L V6	S	Long Hose - 90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	18127L
ACDelco	18136L
ACDelco	18156L
ACDelco	16451M
ACDelco	18128L
CARQUEST	19860
CARQUEST	28477
Datsun/Nissan	92400-0B010
Datsun/Nissan	92400-0B000
Duralast	E80414
Ford	2M5Z-18K359-AD
Ford	YS4Z-18K359-JA
Ford	F3XY-18472-A
Ford	1M5Z-18K359-AA
Ford	F3XY-18472-B
Ford	1M51-18K359-AA
Freshstart	4204
Gates	19657
Gates	19699
Gates	19860
Gates	19660
Gates	28477
General Motors	22731576
General Motors	15280438
Goodyear	63924
Honda	79725-S87-A00
NAPA	11860
NAPA	11699
NAPA	9818
NAPA	11657
NAPA	11660
Pirelli	43924

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 21738

1996 Mazda Millenia HVAC Heater Hose ZO 21738

Gates HVAC Heater Hose 21738 - Thermostat To Pipe-1

Position: Thermostat To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .62
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, L Molded Coolant Hose Fuel Type: GAS Thermostat To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, L	Molded Coolant Hose	Fuel Type: GAS	Thermostat To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87848

1996 Mazda Millenia HVAC Heater Hose DY 87848

Dayco HVAC Heater Hose 87848 - Heater To Thermostat

Position: Heater To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Position
2.5L V6 Base, L Cut to Fit - Small I.D. Heater Hose Heater To Thermostat
Part Interchange
ACDelco 18074L
CARQUEST 18914
Duralast E87848
Ford F7UZ-18472-HA
Gates 18914
General Motors 15145587
General Motors 15647934
General Motors 15763368
Goodyear 64133
NAPA 10914
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	Base, L	Cut to Fit - Small I.D. Heater Hose	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87801

1996 Mazda Millenia HVAC Heater Hose DY 87801

Dayco HVAC Heater Hose 87801 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Position
2.5L V6 Base, L Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 18293L
ACDelco 18091L
CARQUEST 18996
Duralast E87801
Ford 1L2Z-18482-VA
Freshstart 63293
Gates 19282
Gates 18996
Goodyear 63293
Mazda GD7E-61-212
Mazda TA01-61-212A
Motorcraft KH70
NAPA 11282
NAPA 10996
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	Base, L	Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18983

1996 Mazda Millenia HVAC Heater Hose ZO 18983

Gates HVAC Heater Hose 18983 - Pipe-2 To Throttle Body

Position: Pipe-2 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 26
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Fit Notes Position
2.3L V6 S Molded Heater Hose Fuel Type: GAS Pipe-2 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L V6	S	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 19283

1996 Mazda Millenia HVAC Heater Hose ZO 19283

Gates HVAC Heater Hose 19283 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, L Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	Base, L	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

1996 Mazda Millenia HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Thermostat

Position: Engine To Throttle Body, Throttle Body To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 Mazda Millenia Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 Base, L Cut to Length, 16" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Throttle Body, Throttle Body To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1996 Mazda Millenia HVAC Heater Hose

Dayco HVAC Heater Hose 80413 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28461 - Reservoir To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80414 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 21738 - Thermostat To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87848 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87801 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18983 - Pipe-2 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19283 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18074L
CARQUEST	18914
Duralast	E87848
Ford	F7UZ-18472-HA
Gates	18914
General Motors	15145587
General Motors	15647934
General Motors	15763368
Goodyear	64133
NAPA	10914

ACDelco	18293L
ACDelco	18091L
CARQUEST	18996
Duralast	E87801
Ford	1L2Z-18482-VA
Freshstart	63293
Gates	19282
Gates	18996
Goodyear	63293
Mazda	GD7E-61-212
Mazda	TA01-61-212A
Motorcraft	KH70
NAPA	11282
NAPA	10996

My Vehicle:

1996 Mazda Millenia HVAC Heater Hose

Dayco HVAC Heater Hose 80413 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28461 - Reservoir To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80414 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 21738 - Thermostat To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87848 - Heater To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87801 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18983 - Pipe-2 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19283 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X