Home

1993 Mazda Navajo

My Vehicle:

1993 Mazda Navajo HVAC Heater Hose

We have found 5 HVAC Heater Hose for

1993 Mazda Navajo

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87715

Dayco HVAC Heater Hose 87715 - Heater To Water Pump

Position: Heater To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Mazda Navajo Engines.
Engine Sub Model Notes Position
4.0L V6 DX, LX Small I.D. Heater Hose Heater To Water Pump
Part Interchange
ACDelco 18070L
CARQUEST 18906
Duralast E87715
Ford F0TZ-18472-A
Freshstart 4447
Gates 18906
Goodyear 63174
NAPA 10906
V&W 303715
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	DX, LX	Small I.D. Heater Hose	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87684

1993 Mazda Navajo HVAC Heater Hose DY 87684

Dayco HVAC Heater Hose 87684 - Heater To Thermostat

Position: Heater To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Mazda Navajo Engines.
Engine Sub Model Notes Position
4.0L V6 DX, LX Small I.D. Heater Hose Heater To Thermostat

Engine	Sub Model	Notes	Position
4.0L V6	DX, LX	Small I.D. Heater Hose	Heater To Thermostat

Part Interchange

ACDelco	18104L
ACDelco	18045L
ACDelco	18409L
CARQUEST	18840
CARQUEST	19575
CARQUEST	19045
Chrysler	55057236AC
Duralast	E87684
Freshstart	4448
Gates	19516
Gates	19575
Gates	19045
Gates	18840
Goodyear	63175
Honda	79725S84A00
Honda	79721-TA0-A01
Mazda	ZZL015184
NAPA	11045
NAPA	11575
NAPA	11516
NAPA	10840
NAPA	18390L
V&W	303684

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18906

1993 Mazda Navajo HVAC Heater Hose ZO 18906

Gates HVAC Heater Hose 18906 - Heater To Water Pump, Valve To Water Pump

Position: Heater To Water Pump, Valve To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 39.8
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Mazda Navajo Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 DX, LX Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Water Pump, Valve To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	DX, LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump, Valve To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18840

1993 Mazda Navajo HVAC Heater Hose ZO 18840

Gates HVAC Heater Hose 18840 - Heater To Thermostat, Thermostat To Valve

Position: Heater To Thermostat, Thermostat To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Mazda Navajo Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 DX, LX Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Thermostat, Thermostat To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	DX, LX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat, Thermostat To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1993 Mazda Navajo HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Valve

Position: Heater To Valve

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Mazda Navajo Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 DX, LX W/A.C.; Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18070L
CARQUEST	18906
Duralast	E87715
Ford	F0TZ-18472-A
Freshstart	4447
Gates	18906
Goodyear	63174
NAPA	10906
V&W	303715

My Vehicle:

1993 Mazda Navajo HVAC Heater Hose

Dayco HVAC Heater Hose 87715 - Heater To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87684 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18906 - Heater To Water Pump, Valve To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18840 - Heater To Thermostat, Thermostat To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Valve

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X