1995 Mercury Cougar HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19628

Gates HVAC Heater Hose 19628 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.8
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 XR-7 Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	XR-7	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88396

1995 Mercury Cougar HVAC Heater Hose DY 88396

Dayco HVAC Heater Hose 88396 - Engine To Heater

Position: Engine To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Position
4.6L V8 XR-7 Small I.D. Heater Hose Engine To Heater
Part Interchange
Duralast B88396
Ford F6SZ-18472-BA
Ford F4SH-18D334-BB
Ford F6SH-18K580-BA
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	XR-7	Small I.D. Heater Hose	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19636

1995 Mercury Cougar HVAC Heater Hose ZO 19636

Gates HVAC Heater Hose 19636 - Pipe-3 To Water Pump

Position: Pipe-3 To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.5
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 XR-7 Molded Heater Hose Fuel Type: GAS Pipe-3 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	XR-7	Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28475

1995 Mercury Cougar HVAC Heater Hose ZO 28475

Gates HVAC Heater Hose 28475 - Intake Manifold To Pipe-2

Position: Intake Manifold To Pipe-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 XR-7 Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Intake Manifold To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	XR-7	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Intake Manifold To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88398

1995 Mercury Cougar HVAC Heater Hose DY 88398

Dayco HVAC Heater Hose 88398 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Position
3.8L V6 XR-7 Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16181M
CARQUEST 19692
Datsun/Nissan 92410-4W000
Duralast C88398
Ford F4SH-18K580-AD
Ford F6SH-18K580-AA
Ford F4SZ-18472-C
Gates 19692
Goodyear 64146
NAPA 11692
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	XR-7	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88397

1995 Mercury Cougar HVAC Heater Hose DY 88397

Dayco HVAC Heater Hose 88397 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Position
4.6L V8 XR-7 Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16180M
CARQUEST 19691
Duralast C88397
Ford F4SZ-18472-D
Ford F4SH-18D359-BB
Gates 19691
NAPA 11691
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	XR-7	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19692

1995 Mercury Cougar HVAC Heater Hose ZO 19692

Gates HVAC Heater Hose 19692 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.3
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 XR-7 Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	XR-7	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19691

1995 Mercury Cougar HVAC Heater Hose ZO 19691

Gates HVAC Heater Hose 19691 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.2
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 XR-7 Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XR-7	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1995 Mercury Cougar HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 XR-7 Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XR-7	Cut to Length, 6" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

1995 Mercury Cougar HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Pipe-1 To Intake Manifold

Position: Pipe-1 To Intake Manifold

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1995 Mercury Cougar Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 XR-7 Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-1 To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Duralast	B88396
Ford	F6SZ-18472-BA
Ford	F4SH-18D334-BB
Ford	F6SH-18K580-BA

ACDelco	16181M
CARQUEST	19692
Datsun/Nissan	92410-4W000
Duralast	C88398
Ford	F4SH-18K580-AD
Ford	F6SH-18K580-AA
Ford	F4SZ-18472-C
Gates	19692
Goodyear	64146
NAPA	11692

ACDelco	16180M
CARQUEST	19691
Duralast	C88397
Ford	F4SZ-18472-D
Ford	F4SH-18D359-BB
Gates	19691
NAPA	11691

My Vehicle:

1995 Mercury Cougar HVAC Heater Hose

Gates HVAC Heater Hose 19628 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88396 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19636 - Pipe-3 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28475 - Intake Manifold To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88398 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88397 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19692 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19691 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Pipe-1 To Intake Manifold

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X