1986 Mercury Grand Marquis HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87635

Dayco HVAC Heater Hose 87635 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Colony Park, LS Small I.D. Heater Hose Heater To Pipe-2
Part Interchange
ACDelco 16043M
CARQUEST 18750
Duralast C87635
Freshstart 4518
Gates 18750
General Motors 10175930
Goodyear 63245
Kia 97312-2K200
NAPA 10750
V&W 303635
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, Colony Park, LS	Small I.D. Heater Hose	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18750

1986 Mercury Grand Marquis HVAC Heater Hose ZO 18750

Gates HVAC Heater Hose 18750 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Colony Park, LS Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Colony Park, LS	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

1986 Mercury Grand Marquis HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Colony Park, LS W/Auto. Temp. Control; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Colony Park, LS	W/Auto. Temp. Control; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19610

1986 Mercury Grand Marquis HVAC Heater Hose ZO 19610

Gates HVAC Heater Hose 19610 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, LS, Colony Park W/Auto. Temp. Control; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, LS, Colony Park	W/Auto. Temp. Control; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

1986 Mercury Grand Marquis HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Colony Park, LS w/Auto Temp. Control - 90? Molded Coolant Hose Heater To Pipe-1

Engine	Sub Model	Notes	Position
5.0L V8	Base, Colony Park, LS	w/Auto Temp. Control - 90? Molded Coolant Hose	Heater To Pipe-1

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18741

1986 Mercury Grand Marquis HVAC Heater Hose ZO 18741

Gates HVAC Heater Hose 18741 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.2
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, LS, Colony Park Molded Heater Hose Fuel Type: GAS Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, LS, Colony Park	Molded Heater Hose	Fuel Type: GAS	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18708

1986 Mercury Grand Marquis HVAC Heater Hose ZO 18708

Gates HVAC Heater Hose 18708 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, LS, Colony Park W/O Auto. Temp. Control - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, LS, Colony Park	W/O Auto. Temp. Control - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88358

1986 Mercury Grand Marquis HVAC Heater Hose DY 88358

Dayco HVAC Heater Hose 88358 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Colony Park, LS w/A.C., w/o Auto Temp. Control - Small I.D. Heater Hose Heater To Pipe-1

Engine	Sub Model	Notes	Position
5.0L V8	Base, Colony Park, LS	w/A.C., w/o Auto Temp. Control - Small I.D. Heater Hose	Heater To Pipe-1

Part Interchange

ACDelco	16514M
ACDelco	18118L
CARQUEST	19913
CARQUEST	19611
Datsun/Nissan	92410-JA000
Datsun/Nissan	92410-JA00A
Datsun/Nissan	92410-ZX00A
Duralast	E88358
Gates	19913
Gates	19611
General Motors	1636469
General Motors	14034306
General Motors	1644881
General Motors	19129866
General Motors	1641782
Goodyear	64318
NAPA	11611
NAPA	11913
V&W	304358

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80406

1986 Mercury Grand Marquis HVAC Heater Hose DY 80406

Dayco HVAC Heater Hose 80406 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 48
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Colony Park, LS w/Police Pkg. - 90? Molded Coolant Hose Heater To Pipe-1
Part Interchange
ACDelco 18340L
ACDelco 18153L
CARQUEST 28472
Chrysler 55036503
Chrysler 55057222AD
Chrysler 5503691
Chrysler 5503643
Duralast E80406
Freshstart 4108
Gates 28472
Gates 19390
Goodyear 63848
NAPA 9813
NAPA 11390
Pirelli 43848
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, Colony Park, LS	w/Police Pkg. - 90? Molded Coolant Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28479

1986 Mercury Grand Marquis HVAC Heater Hose ZO 28479

Gates HVAC Heater Hose 28479 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 40
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 36
Arm Length 2 : 914.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Colony Park, LS W/Police Pkg.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Colony Park, LS	W/Police Pkg.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19683

1986 Mercury Grand Marquis HVAC Heater Hose ZO 19683

Gates HVAC Heater Hose 19683 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 Base, LS, Colony Park W/Auto. Temp. Control - Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	Base, LS, Colony Park	W/Auto. Temp. Control - Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19611

1986 Mercury Grand Marquis HVAC Heater Hose ZO 19611

Gates HVAC Heater Hose 19611 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1986 Mercury Grand Marquis Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Colony Park, LS W/A.C.; W/O Auto. Temp. Control; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16043M
CARQUEST	18750
Duralast	C87635
Freshstart	4518
Gates	18750
General Motors	10175930
Goodyear	63245
Kia	97312-2K200
NAPA	10750
V&W	303635

ACDelco	18340L
ACDelco	18153L
CARQUEST	28472
Chrysler	55036503
Chrysler	55057222AD
Chrysler	5503691
Chrysler	5503643
Duralast	E80406
Freshstart	4108
Gates	28472
Gates	19390
Goodyear	63848
NAPA	9813
NAPA	11390
Pirelli	43848

My Vehicle:

1986 Mercury Grand Marquis HVAC Heater Hose

Dayco HVAC Heater Hose 87635 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18750 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19610 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18741 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18708 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80406 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28479 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19683 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X