2000 Mercury Mystique HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 22448

Gates HVAC Heater Hose 22448 - Water Pump Inlet

Position: Water Pump Inlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 8.4
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 LS Cut to fit - Molded Coolant Hose Fuel Type: GAS Water Pump Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	LS	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Water Pump Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87614

2000 Mercury Mystique HVAC Heater Hose DY 87614

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Position
2.0L L4 GS Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.0L L4	GS	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	18008L
ACDelco	16354M
ACDelco	16276M
CARQUEST	18082
CARQUEST	18450
Duralast	E87614
Ford	F8RZ-18472-HA
Ford	98BB-18K582-HB
Ford	F8RZ-18472-AA
Freshstart	4365
Gates	19343
Gates	23335
Gates	18082
Gates	18450
General Motors	89023413
General Motors	90573890
General Motors	96539582
General Motors	19129959
General Motors	15187987
General Motors	22704431
Goodyear	63102
NAPA	11343
NAPA	10450
NAPA	10082
NAPA	16073
V&W	303614

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18031

2000 Mercury Mystique HVAC Heater Hose ZO 18031

Gates HVAC Heater Hose 18031 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 LS Cut to fit - Molded Heater Hose Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	LS	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 19074

2000 Mercury Mystique HVAC Heater Hose ZO 19074

Gates HVAC Heater Hose 19074 - Heater To Connector

Position: Heater To Connector

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 31.9
Inside Diameter 1 : .61
Inside Diameter 2 : .71
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 LS Molded Heater Hose Fuel Type: GAS Heater To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	LS	Molded Heater Hose	Fuel Type: GAS	Heater To Connector

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87762

2000 Mercury Mystique HVAC Heater Hose DY 87762

Dayco HVAC Heater Hose 87762 - Tee To Heater

Position: Tee To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Position
2.0L L4 GS Small I.D. Heater Hose Tee To Heater

Engine	Sub Model	Notes	Position
2.0L L4	GS	Small I.D. Heater Hose	Tee To Heater

Part Interchange

ACDelco	16343M
ACDelco	14519S
CARQUEST	19313
CARQUEST	19542
Duralast	E87762
Ford	F7RZ-18402-BA
Ford	F7RZ-18B402-BA
Ford	F8RZ-18472-BA
Ford	97BB-18C553-BB
Gates	19314
Gates	19542
General Motors	88970286
Goodyear	63510
Hyundai	97311-3K100
NAPA	11314
NAPA	11542

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19101

2000 Mercury Mystique HVAC Heater Hose ZO 19101

Gates HVAC Heater Hose 19101 - Connector To Water Pump

Position: Connector To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 29.1
Inside Diameter 1 : .63
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 LS Molded Heater Hose Fuel Type: GAS Connector To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	LS	Molded Heater Hose	Fuel Type: GAS	Connector To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19061

2000 Mercury Mystique HVAC Heater Hose ZO 19061

Gates HVAC Heater Hose 19061 - Connector To Thermostat

Position: Connector To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.9
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Mercury Mystique Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GS Molded Heater Hose Fuel Type: GAS Connector To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2000 Mercury Mystique HVAC Heater Hose

Gates HVAC Heater Hose 22448 - Water Pump Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18031 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19074 - Heater To Connector

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87762 - Tee To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19101 - Connector To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19061 - Connector To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2000 Mercury Mystique HVAC Heater Hose

Gates HVAC Heater Hose 22448 - Water Pump Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18031 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19074 - Heater To Connector

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87762 - Tee To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19101 - Connector To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19061 - Connector To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X