Home

2003 Mitsubishi Diamante

My Vehicle:

2003 Mitsubishi Diamante HVAC Heater Hose

We have found 5 HVAC Heater Hose for

2003 Mitsubishi Diamante

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87624

Dayco HVAC Heater Hose 87624 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Mitsubishi Diamante Engines.
Engine Sub Model Notes Position
3.5L V6 ES, LS, VR-X Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
3.5L V6	ES, LS, VR-X	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	14382S
ACDelco	14429S
ACDelco	14451S
ACDelco	16040M
ACDelco	14298S
ACDelco	14395S
CARQUEST	19313
CARQUEST	19380
CARQUEST	18737
CARQUEST	19285
CARQUEST	19409
CARQUEST	19140
Chrysler	05005342AB
Duralast	C87624
Ford	XW4H-18N344-AD
Ford	9L34-18K580-EB
Freshstart	4533
Gates	19409
Gates	19380
Gates	19313
Gates	19285
Gates	18737
Gates	19140
General Motors	88970285
Goodyear	63260
Honda	79725-S04-000
Honda	79725-SR3-000
Hyundai	97315-02000
Mitsubishi	AW342620
NAPA	11313
NAPA	11409
NAPA	11140
NAPA	10737
NAPA	11380
NAPA	11285
Toyota	87245-48590
Toyota	87245-08080
Toyota	87245-02510
V&W	303624

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19140

2003 Mitsubishi Diamante HVAC Heater Hose ZO 19140

Gates HVAC Heater Hose 19140 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Mitsubishi Diamante Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 ES, LS, VR-X Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	ES, LS, VR-X	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

2003 Mitsubishi Diamante HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Throttle Body Inlet

Position: Throttle Body Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Mitsubishi Diamante Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 ES, LS, VR-X Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	ES, LS, VR-X	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87654

2003 Mitsubishi Diamante HVAC Heater Hose DY 87654

Dayco HVAC Heater Hose 87654 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2003 Mitsubishi Diamante Engines.
Engine Sub Model Notes Position
3.5L V6 ES, LS, VR-X Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 16052M
CARQUEST 18778
Duralast C87654
Freshstart 4459
Gates 18778
Goodyear 63186
Mitsubishi MR398462
NAPA 10778
V&W 303654
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	ES, LS, VR-X	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2003 Mitsubishi Diamante HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body Outlet

Position: Throttle Body Outlet

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Mitsubishi Diamante Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 ES, LS, VR-X W/Traction Control; Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Throttle Body Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16052M
CARQUEST	18778
Duralast	C87654
Freshstart	4459
Gates	18778
Goodyear	63186
Mitsubishi	MR398462
NAPA	10778
V&W	303654

My Vehicle:

2003 Mitsubishi Diamante HVAC Heater Hose

Dayco HVAC Heater Hose 87624 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19140 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87654 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X