631-302-9490

8AM To 6PM (EST)
Monday to Friday

Secure Checkout with

Selected Vehicle: 2008 Nissan Altima Change

Shopping Kart 0 item (s)
Home
>
2008 Nissan Altima

My Vehicle:

Search Filter:
Engine
    x
  • Check All Engines
  • 2.5L L4
  • 3.5L V6
  • Uncheck All Engine(s)
Brand
    x
  • Check All Brands
  • Dayco
  • Gates
  • Uncheck All Brand(s)
Position
    x
  • Check All Positions
  • Heater Inlet
  • Heater Outlet
  • Housing To Heater Water Pump
  • Left
  • Oil Cooler Inlet
  • Right
  • Throttle Body To Housing
  • Uncheck All Position(s)

2008 Nissan Altima HVAC Heater Hose

We have found 8 HVAC Heater Hose for
2008 Nissan Altima 2008 Nissan Altima
Part Name: HVAC Heater HoseBrand: GatesPart#: 19872
2008 Nissan Altima HVAC Heater Hose ZO 19872
2008 Nissan Altima HVAC Heater Hose ZO 19872

Gates HVAC Heater Hose 19872 - Housing To Heater Water Pump

ZO
Housing To Heater Water Pump

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 15.2
  • Inside Diameter 1 : .73
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$3.46
21
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLMolded Heater HoseFuel Type: ELECTRIC/GASHousing To Heater Water Pump
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 80412
2008 Nissan Altima HVAC Heater Hose DY 80412

Dayco HVAC Heater Hose 80412 - Heater Inlet

DY
Heater Inlet

Description:

  • 90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 12
  • End 1 Inside Diameter : 3/4
  • End 2 Inside Diameter : 3/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
New
$12.51
13
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesPosition
    3.5L V6Coupe, S, SE, SL90? Molded Coolant HoseHeater Inlet
  • Part Interchange
    ACDelco14495S
    ACDelco14265S
    ACDelco16199M
    ACDelco14371S
    AtlasMH-72
    Audi4F0.121.036
    Audi4F0.121.109E
    CARQUEST28475
    CARQUEST19859
    CARQUEST19803
    Chrysler4596300
    Datsun/Nissan92400-7S510
    Datsun/Nissan92411-4W000
    DuralastD80412
    FordF5AZ-18472-A
    FordF5AH-18C266
    FordF2AH-18C266-AB
    FordF5RZ-18472-G
    Ford93BB-18K582-HD
    Freshstart4202
    Gates19749
    Gates28475
    Gates19803
    Gates19859
    General Motors10358376
    General Motors88956890
    General Motors21031476
    General Motors10218423
    General Motors25654608
    General Motors21031156
    General Motors14100796
    General Motors15246437
    General Motors22537653
    General Motors1645476
    Goodyear63912
    Honda79725-S0X-A00
    NAPA9816
    NAPA11749
    NAPA11859
    NAPA11803
    Saturn21030772
    Saturn10384033
    Saturn10384055
    Saturn15246436
    Saturn15246437
    Suzuki17856-85Z00
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19913
2008 Nissan Altima HVAC Heater Hose ZO 19913
2008 Nissan Altima HVAC Heater Hose ZO 19913

Gates HVAC Heater Hose 19913 - Heater Outlet

ZO
Heater Outlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 17.7
  • Inside Diameter 1 : .74
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$15.57
9
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLMolded Heater HoseFuel Type: GASHeater Outlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 19914
2008 Nissan Altima HVAC Heater Hose ZO 19914
2008 Nissan Altima HVAC Heater Hose ZO 19914

Gates HVAC Heater Hose 19914 - Heater Inlet

ZO
Heater Inlet

Description:

  • Molded Heater Hose

Part Specifications:

  • Centerline Length : 21.5
  • Inside Diameter 1 : .74
  • Number of Branches : 0

Features:

  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

    • Similar to OEM specifications.
    • Has all the quality features of Gates Molded Coolant Hose.
    • Engineered to resist electrochemical degradation - the leading cause of hose failure.
    • Inside diameters range from 1/4 to 1 .
    • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

    Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.

    Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

    Gates - Powering Progress

New
$16.02
62
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLMolded Heater HoseFuel Type: GASHeater Inlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 88469
2008 Nissan Altima HVAC Heater Hose DY 88469

Dayco HVAC Heater Hose 88469 - Left

DY
Left

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 17 1/2
  • End 1 Inside Diameter : 3/4
  • End 1 Outside Diameter : 1 1/16
  • End 2 Inside Diameter : 3/4
  • End 2 Outside Diameter : 1 1/16
  • Contains Protective Sleeve : Y
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
New
$16.37
3
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLSmall I.D. Heater HoseFuel Type: GASLeft
  • Part Interchange
    ACDelco16332M
    ACDelco16515M
    CARQUEST19819
    CARQUEST19914
    Datsun/Nissan92400-ZX00A
    Datsun/Nissan92400-JA00A
    Datsun/Nissan92400-JA000
    DuralastE88469
    FordYL8Z-8B081-BA
    Gates19914
    Gates19819
    MotorcraftKM4686
    NAPA11914
    NAPA11819
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 88358
2008 Nissan Altima HVAC Heater Hose DY 88358

Dayco HVAC Heater Hose 88358 - Right

DY
Right

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 16
  • End 1 Inside Diameter : 3/4
  • End 2 Inside Diameter : 3/4
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$18.67
15
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLCut to Fit - Hose Must Be Cut On Both Ends - Small I.D. Heater HoseFuel Type: GASRight
  • Part Interchange
    ACDelco16514M
    ACDelco18118L
    CARQUEST19913
    CARQUEST19611
    Datsun/Nissan92410-JA000
    Datsun/Nissan92410-JA00A
    Datsun/Nissan92410-ZX00A
    DuralastE88358
    Gates19913
    Gates19611
    General Motors1636469
    General Motors14034306
    General Motors1644881
    General Motors19129866
    General Motors1641782
    Goodyear64318
    NAPA11611
    NAPA11913
    V&W304358
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: DaycoPart#: 86817
2008 Nissan Altima HVAC Heater Hose DY 86817

Dayco HVAC Heater Hose 86817 - Throttle Body To Housing

DY
Throttle Body To Housing

Description:

  • MOLDED HEATER HOSE DAYCO

Part Specifications:

  • Hose Type : Single I.D. Hose
  • Trunk Height : 7-1/2
  • End 1 Inside Diameter : 5/16
  • End 2 Inside Diameter : 5/16
  • Contains Protective Sleeve : N
  • Contains Heat Shield : N
  • Color : Black
  • Material : EPDM
  • SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC
    • See more

Features:

  • Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
New
$19.96
5
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLSmall I.D. Heater HoseFuel Type: GASThrottle Body To Housing
  • Part Interchange
    ACDelco14040S
    ACDelco14042S
    ACDelco14031S
    ACDelco14588S
    CARQUEST18223
    CARQUEST18099
    CARQUEST18238
    Datsun/Nissan14046-1E413
    DuralastB86817
    Gates18240
    Gates18238
    Gates18223
    Gates18099
    NAPA10238
    NAPA10223
    NAPA10099
    NAPA10240
    Toyota16267-35030
  • Warranty & Easy Return
    Manufacturer’s Warranty : 12 Months/12,000 Miles
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.
Part Name: HVAC Heater HoseBrand: GatesPart#: 28409
2008 Nissan Altima HVAC Heater Hose ZO 28409
2008 Nissan Altima HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Oil Cooler Inlet

ZO
Oil Cooler Inlet

Description:

  • Straight Heater Hose Standard

Part Specifications:

  • Centerline Length : 50
  • Centerline Length : 15.24
  • Centerline Length : 600
  • Inside Diameter 1 : .375
  • Working Pressure : 60
  • Weight Per Length : 8.25 lbs./Carton
    • See more

Features:

  • Premium hose constructed for long service life.

    • Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
    • Good resistance to high temperatures for extended periods of time
    • Similar to SAE 20R3 Class D-2
    • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

    CAUTION: Do not use for fuel or oil transfer applications.

    Gates Powering Progress

2
New
$42.08
159
Add to Kart
Buy Now
Warranty"Fast ShippingLowest Price
  • Fitments
    This Part Fits Following 2008 Nissan Altima Engines.
    EngineSub ModelNotesFit NotesPosition
    2.5L L4Base, Coupe, Hybrid, S, SLCut to fit - Straight Heater Hose (Standard)Fuel Type: ELECTRIC/GASOil Cooler Inlet
  • Warranty & Easy Return
    Manufacturer’s Warranty : Limited Lifetime
    You can return the part within 30 days for any reasons.
    After 30 days, all parts are covered under manufacturer’s warranty.
    Refunds get issued within 24 to 48 hours to your mode of payment after return part received.