2013 Nissan Altima HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

Gates HVAC Heater Hose 28466 - Crossover To Pipe

Position: Crossover To Pipe

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 S, SL, SV, Exclusive Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Crossover To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	S, SL, SV, Exclusive	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Crossover To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19913

2013 Nissan Altima HVAC Heater Hose ZO 19913

Gates HVAC Heater Hose 19913 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.7
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, S, SL, SV, Advance, Sense Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, S, SL, SV, Advance, Sense	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19914

2013 Nissan Altima HVAC Heater Hose ZO 19914

Gates HVAC Heater Hose 19914 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.5
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, S, SL, SV, Advance, Sense Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, S, SL, SV, Advance, Sense	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86817

2013 Nissan Altima HVAC Heater Hose DY 86817

Dayco HVAC Heater Hose 86817 - Throttle Body To Housing

Position: Throttle Body To Housing

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7-1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Position
2.5L L4 Base, S, SL, SV Small I.D. Heater Hose Throttle Body To Housing

Engine	Sub Model	Notes	Position
2.5L L4	Base, S, SL, SV	Small I.D. Heater Hose	Throttle Body To Housing

Part Interchange

ACDelco	14040S
ACDelco	14042S
ACDelco	14031S
ACDelco	14588S
CARQUEST	18223
CARQUEST	18099
CARQUEST	18238
Datsun/Nissan	14046-1E413
Duralast	B86817
Gates	18240
Gates	18238
Gates	18223
Gates	18099
NAPA	10238
NAPA	10223
NAPA	10099
NAPA	10240
Toyota	16267-35030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2013 Nissan Altima HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Reservoir To Filler Neck

Position: Reservoir To Filler Neck

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 S, SL, SV, Exclusive Cut to fit - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Filler Neck
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	S, SL, SV, Exclusive	Cut to fit - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Filler Neck

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2013 Nissan Altima HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body To Crossover, Throttle Body To Front Pipe

Position: Throttle Body To Crossover, Throttle Body To Front Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 S, SL, SV, Exclusive Straight Heater Hose (Standard) Fuel Type: GAS Throttle Body To Crossover, Throttle Body To Front Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	S, SL, SV, Exclusive	Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Crossover, Throttle Body To Front Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2013 Nissan Altima HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Oil Cooler Inlet, Oil Cooler To Pipe, Pipe To Thermostat

Position: Oil Cooler Inlet, Oil Cooler To Pipe, Pipe To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 S, SL, SV, Exclusive Cut to fit - Straight Heater Hose (Standard) Fuel Type: GAS Oil Cooler Inlet, Oil Cooler To Pipe, Pipe To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2013 Nissan Altima HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Crossover To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19913 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19914 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86817 - Throttle Body To Housing

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Reservoir To Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Crossover, Throttle Body To Front Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler Inlet, Oil Cooler To Pipe, Pipe To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2013 Nissan Altima HVAC Heater Hose

Gates HVAC Heater Hose 28466 - Crossover To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19913 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19914 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86817 - Throttle Body To Housing

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Reservoir To Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Crossover, Throttle Body To Front Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler Inlet, Oil Cooler To Pipe, Pipe To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X