2000 Nissan Maxima HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86815

Dayco HVAC Heater Hose 86815 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 9/32
End 2 Inside Diameter : 9/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Position
3.0L V6 GXE, SE, GLE Small I.D. Heater Hose Pipe To Throttle Body
Part Interchange
ACDelco 14016S
CARQUEST 18124
Chrysler 4746700
Duralast B86815
Gates 18124
NAPA 10124
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	GXE, SE, GLE	Small I.D. Heater Hose	Pipe To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18263

2000 Nissan Maxima HVAC Heater Hose ZO 18263

Gates HVAC Heater Hose 18263 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	GLE, GXE, SE	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

2000 Nissan Maxima HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Pipe-1 To Pipe-3

Position: Pipe-1 To Pipe-3

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-1 To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	GLE, GXE, SE	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Pipe-3

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71748

2000 Nissan Maxima HVAC Heater Hose DY 71748

Dayco HVAC Heater Hose 71748 - Thermostat To Engine

Position: Thermostat To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 1 1/16
End 2 Inside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Position
3.0L V6 GXE, GLE, SE Cut to Fit - Curved Radiator Hose Thermostat To Engine
Part Interchange
ACDelco 20157S
ACDelco 20334S
CARQUEST 21404
Datsun/Nissan 14055-2Y000
Datsun/Nissan 21047-89Y10
Duralast B71748
Gates 22519
Gates 21404
Goodyear 61002
Honda 19502-P5M-000
NAPA 8101
NAPA 9152
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	GXE, GLE, SE	Cut to Fit - Curved Radiator Hose	Thermostat To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 22519

2000 Nissan Maxima HVAC Heater Hose ZO 22519

Gates HVAC Heater Hose 22519 - Thermostat To Engine

Position: Thermostat To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 5.8
Inside Diameter 1 : 1
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Molded Coolant Hose Fuel Type: GAS Thermostat To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	GLE, GXE, SE	Molded Coolant Hose	Fuel Type: GAS	Thermostat To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18240

2000 Nissan Maxima HVAC Heater Hose ZO 18240

Gates HVAC Heater Hose 18240 - Throttle Body To Valve

Position: Throttle Body To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Protective sleeve required; Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	GLE, GXE, SE	Protective sleeve required; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86817

2000 Nissan Maxima HVAC Heater Hose DY 86817

Dayco HVAC Heater Hose 86817 - Pipe To Tee, Throttle Body To Valve

Position: Pipe To Tee, Throttle Body To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7-1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Position
3.0L V6 SE, GLE, GXE Cut to Fit - Small I.D. Heater Hose Pipe To Tee, Throttle Body To Valve

Engine	Sub Model	Notes	Position
3.0L V6	SE, GLE, GXE	Cut to Fit - Small I.D. Heater Hose	Pipe To Tee, Throttle Body To Valve

Part Interchange

ACDelco	14040S
ACDelco	14042S
ACDelco	14031S
ACDelco	14588S
CARQUEST	18223
CARQUEST	18099
CARQUEST	18238
Datsun/Nissan	14046-1E413
Duralast	B86817
Gates	18240
Gates	18238
Gates	18223
Gates	18099
NAPA	10238
NAPA	10223
NAPA	10099
NAPA	10240
Toyota	16267-35030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18223

2000 Nissan Maxima HVAC Heater Hose ZO 18223

Gates HVAC Heater Hose 18223 - Pipe-2 To Tee-1

Position: Pipe-2 To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Protective sleeve required; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	GLE, GXE, SE	Protective sleeve required; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Tee-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88401

2000 Nissan Maxima HVAC Heater Hose DY 88401

Dayco HVAC Heater Hose 88401 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Position
3.0L V6 GLE, GXE, SE Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18163L
Datsun/Nissan 92400-40U01
Datsun/Nissan 92400-2Y900
Duralast B88401
Gates 19756
NAPA 11756
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	GLE, GXE, SE	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88402

2000 Nissan Maxima HVAC Heater Hose DY 88402

Dayco HVAC Heater Hose 88402 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Position
3.0L V6 GXE, SE, GLE Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 18412L
ACDelco 18162L
CARQUEST 19755
CARQUEST 19899
Datsun/Nissan 92410-2Y900
Datsun/Nissan 92410-5Y700
Datsun/Nissan 92410-8J100
Datsun/Nissan 92410-40U00
Duralast E88402
Gates 19899
Gates 19755
NAPA 11899
NAPA 11755
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	GXE, SE, GLE	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19814

2000 Nissan Maxima HVAC Heater Hose ZO 19814

Gates HVAC Heater Hose 19814 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 34.5
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Nissan Maxima Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 GLE, GXE, SE Protective sleeve required - Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14016S
CARQUEST	18124
Chrysler	4746700
Duralast	B86815
Gates	18124
NAPA	10124

ACDelco	20157S
ACDelco	20334S
CARQUEST	21404
Datsun/Nissan	14055-2Y000
Datsun/Nissan	21047-89Y10
Duralast	B71748
Gates	22519
Gates	21404
Goodyear	61002
Honda	19502-P5M-000
NAPA	8101
NAPA	9152

ACDelco	18163L
Datsun/Nissan	92400-40U01
Datsun/Nissan	92400-2Y900
Duralast	B88401
Gates	19756
NAPA	11756

ACDelco	18412L
ACDelco	18162L
CARQUEST	19755
CARQUEST	19899
Datsun/Nissan	92410-2Y900
Datsun/Nissan	92410-5Y700
Datsun/Nissan	92410-8J100
Datsun/Nissan	92410-40U00
Duralast	E88402
Gates	19899
Gates	19755
NAPA	11899
NAPA	11755

My Vehicle:

2000 Nissan Maxima HVAC Heater Hose

Dayco HVAC Heater Hose 86815 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18263 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Pipe-1 To Pipe-3

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71748 - Thermostat To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22519 - Thermostat To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18240 - Throttle Body To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86817 - Pipe To Tee, Throttle Body To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18223 - Pipe-2 To Tee-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88401 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88402 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19814 - Heater To Tee-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X