1991 Nissan Sentra HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86800

Dayco HVAC Heater Hose 86800 - Pipe To Engine, Pipe To Pipe, Throttle Body To Engine

Position: Pipe To Engine, Pipe To Pipe, Throttle Body To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.6L L4 E, GXE, SE, XE, Classic Small I.D. Heater Hose Throttle Body To Engine
2.0L L4 SE-R Small I.D. Heater Hose Pipe To Engine, Pipe To Pipe

Engine	Sub Model	Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Small I.D. Heater Hose	Throttle Body To Engine
2.0L L4	SE-R	Small I.D. Heater Hose	Pipe To Engine, Pipe To Pipe

Part Interchange

ACDelco	14001S
CARQUEST	18020
Datsun/Nissan	14056-65Y10
Datsun/Nissan	14056-86G02
Datsun/Nissan	14056-D3310
Datsun/Nissan	14056-40F12
Datsun/Nissan	14056-88G02
Datsun/Nissan	14056-97000
Datsun/Nissan	14055-57Y12
Datsun/Nissan	14055-D4200
Datsun/Nissan	14056-30P21
Datsun/Nissan	14056-30P24
Datsun/Nissan	14056-30R16
Datsun/Nissan	14056-40F04
Duralast	B86800
Ford	F5TH-18C266-AB
Gates	18020
Goodyear	64310
Honda	19506-PC6-000
Honda	19508-PK2-000
Honda	19510-PH3-000
Honda	19511-PH3-J00
Honda	19511-PH3-000
Honda	19514-PJ0-660
NAPA	10020
Toyota	16264-16050
Toyota	16264-62030
Toyota	16267-16040
Toyota	16281-62010
Toyota	16267-76010
Toyota	16261-73070
V&W	302800

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18202

1991 Nissan Sentra HVAC Heater Hose ZO 18202

Gates HVAC Heater Hose 18202 - Throttle Body To Engine

Position: Throttle Body To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.8
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SE-R Molded Heater Hose Fuel Type: GAS Throttle Body To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	SE-R	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86804

1991 Nissan Sentra HVAC Heater Hose DY 86804

Dayco HVAC Heater Hose 86804 - Pipe To Valve

Position: Pipe To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6 1/4
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.6L L4 E, GXE, SE, XE, Classic Small I.D. Heater Hose Pipe To Valve

Engine	Sub Model	Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Small I.D. Heater Hose	Pipe To Valve

Part Interchange

ACDelco	14021S
ACDelco	14010S
CARQUEST	18204
CARQUEST	18104
Datsun/Nissan	14054-89W04
Datsun/Nissan	14054-53F05
Duralast	B86804
Freshstart	63198
Gates	18204
Gates	18104
General Motors	99600061
Goodyear	63198
Mazda	B67K-13-682
NAPA	10204
NAPA	10104
Toyota	16264-76010
V&W	302804

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86801

1991 Nissan Sentra HVAC Heater Hose DY 86801

Dayco HVAC Heater Hose 86801 - Throttle Body To Valve

Position: Throttle Body To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.6L L4 E, GXE, SE, XE, Classic Small I.D. Heater Hose Throttle Body To Valve

Engine	Sub Model	Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Small I.D. Heater Hose	Throttle Body To Valve

Part Interchange

ACDelco	16001M
CARQUEST	18021
Datsun/Nissan	14056-57Y11
Duralast	D86801
Freshstart	4363
Gates	18021
Goodyear	63100
Honda	19506-PK1-600
Honda	19513-PT2-000
NAPA	10021
Toyota	16282-65010
Toyota	16264-88381
Toyota	16264-88383
Toyota	16281-65010
Toyota	16267-88382
Toyota	16261-62020
V&W	302801

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1991 Nissan Sentra HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Engine To Pipe, Engine To Throttle Body, Pipe To Engine, Pipe To Pipe

Position: Engine To Pipe, Engine To Throttle Body, Pipe To Engine, Pipe To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Nissan Sentra Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body, Pipe To Engine
2.0L L4	SE-R	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Pipe, Pipe To Pipe

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1991 Nissan Sentra HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Engine To Pipe

Position: Engine To Pipe

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 E, GXE, SE, XE, Classic Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Engine To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Engine To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18021

1991 Nissan Sentra HVAC Heater Hose ZO 18021

Gates HVAC Heater Hose 18021 - Throttle Body To Valve

Position: Throttle Body To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 E, GXE, SE, XE, Classic Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87626

1991 Nissan Sentra HVAC Heater Hose DY 87626

Dayco HVAC Heater Hose 87626 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.6L L4 E, GXE, SE, XE, Classic Small I.D. Heater Hose Valve To Engine
Part Interchange
ACDelco 14084S
CARQUEST 18739
Duralast C87626
Ford E90H-18D334-F
Ford YS4Z-18472-BA
Ford 1M51-18C256-AA
Gates 18739
Goodyear 63144
NAPA 10739
V&W 303626
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18204

1991 Nissan Sentra HVAC Heater Hose ZO 18204

Gates HVAC Heater Hose 18204 - Valve To Pipe

Position: Valve To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.9
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 E, GXE, SE, XE, Classic Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18739

1991 Nissan Sentra HVAC Heater Hose ZO 18739

Gates HVAC Heater Hose 18739 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.3
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 E, GXE, SE, XE, Classic Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18746

1991 Nissan Sentra HVAC Heater Hose ZO 18746

Gates HVAC Heater Hose 18746 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.2
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1991 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.6L L4 E, GXE, SE, XE, Classic Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

1991 Nissan Sentra HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Engine To Valve, Pipe To Pipe

Position: Engine To Valve, Pipe To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1991 Nissan Sentra Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.6L L4	E, GXE, SE, XE, Classic	Cut to Length, 4" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe To Pipe
2.0L L4	SE-R	Cut to Length, 11" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Valve

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14084S
CARQUEST	18739
Duralast	C87626
Ford	E90H-18D334-F
Ford	YS4Z-18472-BA
Ford	1M51-18C256-AA
Gates	18739
Goodyear	63144
NAPA	10739
V&W	303626

My Vehicle:

1991 Nissan Sentra HVAC Heater Hose

Dayco HVAC Heater Hose 86800 - Pipe To Engine, Pipe To Pipe, Throttle Body To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18202 - Throttle Body To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86804 - Pipe To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86801 - Throttle Body To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Engine To Pipe, Engine To Throttle Body, Pipe To Engine, Pipe To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Engine To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18021 - Throttle Body To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87626 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18204 - Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18739 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18746 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Engine To Valve, Pipe To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X