Home

2014 Nissan Sentra

My Vehicle:

2014 Nissan Sentra Radiator Coolant Hose

We have found 6 Radiator Coolant Hose for

2014 Nissan Sentra

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72402

Dayco Radiator Coolant Hose 72402 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 3/16
End 2 Inside Diameter : 1 3/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV Curved Radiator Hose Upper - Filler Neck To Engine
Part Interchange
ACDelco 20493S
ACDelco 20705S
CARQUEST 23326
Datsun/Nissan 21501-3SG0A
Duralast C72402
Gates 23326
Goodyear 66029
Honda 19501-R1A-A01
Honda 19501-RNA-A01
NAPA 16064
NAPA 17012
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	FE+S, FE+SV, S, SL, SR, SV	Curved Radiator Hose	Upper - Filler Neck To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72339

2014 Nissan Sentra Radiator Coolant Hose DY 72339

Dayco Radiator Coolant Hose 72339 - Upper - Radiator To Filler Neck

Position: Upper - Radiator To Filler Neck

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV Cut to Fit - Curved Radiator Hose Upper - Radiator To Filler Neck
Part Interchange
ACDelco 22575M
CARQUEST 23161
Duralast E72339
Gates 23161
General Motors 22728086
NAPA 9889
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	FE+S, FE+SV, S, SL, SR, SV	Cut to Fit - Curved Radiator Hose	Upper - Radiator To Filler Neck

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72779

2014 Nissan Sentra Radiator Coolant Hose DY 72779

Dayco Radiator Coolant Hose 72779 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 25 1/2
End 1 Inside Diameter : 1 11/32
End 1 Outside Diameter : 1 3/4
End 2 Inside Diameter : 1 11/32
End 2 Outside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV Curved Radiator Hose Lower
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	FE+S, FE+SV, S, SL, SR, SV	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24346

2014 Nissan Sentra Radiator Coolant Hose ZO 24346

Gates Radiator Coolant Hose 24346 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.94
Inside Diameter 1 : 1.32
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV, Advance, Exclusive, Sense Molded Coolant Hose Fuel Type: GAS Upper - Filler Neck To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	FE+S, FE+SV, S, SL, SR, SV, Advance, Exclusive, Sense	Molded Coolant Hose	Fuel Type: GAS	Upper - Filler Neck To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24349

2014 Nissan Sentra Radiator Coolant Hose ZO 24349

Gates Radiator Coolant Hose 24349 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 28.82
Inside Diameter 1 : 1.32
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV, Advance, Exclusive, Sense Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	FE+S, FE+SV, S, SL, SR, SV, Advance, Exclusive, Sense	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24348

2014 Nissan Sentra Radiator Coolant Hose ZO 24348

Gates Radiator Coolant Hose 24348 - Upper - Radiator To Filler Neck

Position: Upper - Radiator To Filler Neck

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.1
Inside Diameter 1 : 1.31
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Nissan Sentra Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 FE+S, FE+SV, S, SL, SR, SV, Advance, Exclusive, Sense Molded Coolant Hose Fuel Type: GAS Upper - Radiator To Filler Neck
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20493S
ACDelco	20705S
CARQUEST	23326
Datsun/Nissan	21501-3SG0A
Duralast	C72402
Gates	23326
Goodyear	66029
Honda	19501-R1A-A01
Honda	19501-RNA-A01
NAPA	16064
NAPA	17012

ACDelco	22575M
CARQUEST	23161
Duralast	E72339
Gates	23161
General Motors	22728086
NAPA	9889

My Vehicle:

2014 Nissan Sentra Radiator Coolant Hose

Dayco Radiator Coolant Hose 72402 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72339 - Upper - Radiator To Filler Neck

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72779 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24346 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24349 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24348 - Upper - Radiator To Filler Neck

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X