2013 Nissan Titan HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18132

Gates HVAC Heater Hose 18132 - Throttle Body To Thermostat

Position: Throttle Body To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Molded Heater Hose Fuel Type: FLEX, GAS Throttle Body To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	Molded Heater Hose	Fuel Type: FLEX, GAS	Throttle Body To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 28460

2013 Nissan Titan HVAC Heater Hose ZO 28460

Gates HVAC Heater Hose 28460 - Thermostat To Oil Cooler

Position: Thermostat To Oil Cooler

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV 90º Molded Heater Hose Fuel Type: FLEX, GAS Thermostat To Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	90º Molded Heater Hose	Fuel Type: FLEX, GAS	Thermostat To Oil Cooler

Part Name: HVAC Heater HoseBrand: GatesPart#: 18461

2013 Nissan Titan HVAC Heater Hose ZO 18461

Gates HVAC Heater Hose 18461 - Oil Cooler To Thermostat

Position: Oil Cooler To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.8
Inside Diameter 1 : .46
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Molded Heater Hose Fuel Type: FLEX, GAS Oil Cooler To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	Molded Heater Hose	Fuel Type: FLEX, GAS	Oil Cooler To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80415

2013 Nissan Titan HVAC Heater Hose DY 80415

Dayco HVAC Heater Hose 80415 - Heater Outlet

Position: Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 25
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Position
5.6L V8 PRO-4X, S, SL, SV 90? Molded Coolant Hose Heater Outlet

Engine	Sub Model	Notes	Position
5.6L V8	PRO-4X, S, SL, SV	90? Molded Coolant Hose	Heater Outlet

Part Interchange

ACDelco	18157L
ACDelco	16508M
CARQUEST	19898
CARQUEST	19833
CARQUEST	28478
Datsun/Nissan	92400-7S000
Datsun/Nissan	92410-7S000
Datsun/Nissan	92410-7S500
Duralast	E80415
Ford	3C3Z-18472-BB
Freshstart	4208
Gates	28478
Gates	19898
Gates	19833
Goodyear	63925
NAPA	9819
NAPA	11833
NAPA	11898
Pirelli	43925

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19898

2013 Nissan Titan HVAC Heater Hose ZO 19898

Gates HVAC Heater Hose 19898 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.4
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Molded Heater Hose Fuel Type: FLEX, GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	Molded Heater Hose	Fuel Type: FLEX, GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2013 Nissan Titan HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body To Pipe

Position: Throttle Body To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Straight Heater Hose (Standard) Fuel Type: FLEX, GAS Throttle Body To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	Straight Heater Hose (Standard)	Fuel Type: FLEX, GAS	Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2013 Nissan Titan HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Oil Cooler To Engine

Position: Oil Cooler To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Straight Heater Hose (Standard) Fuel Type: FLEX, GAS Oil Cooler To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.6L V8	PRO-4X, S, SL, SV	Straight Heater Hose (Standard)	Fuel Type: FLEX, GAS	Oil Cooler To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 23797

2013 Nissan Titan HVAC Heater Hose ZO 23797

Gates HVAC Heater Hose 23797 - Heater Inlet

Position: Heater Inlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 42
Number of Branches : 1
Inside Diameter 1 : .73
Inside Diameter 2 : .73
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Nissan Titan Engines.
Engine Sub Model Notes Fit Notes Position
5.6L V8 PRO-4X, S, SL, SV Incl. Heater Control Valve - Molded Coolant Hose Fuel Type: FLEX, GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2013 Nissan Titan HVAC Heater Hose

Gates HVAC Heater Hose 18132 - Throttle Body To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28460 - Thermostat To Oil Cooler

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18461 - Oil Cooler To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80415 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19898 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23797 - Heater Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2013 Nissan Titan HVAC Heater Hose

Gates HVAC Heater Hose 18132 - Throttle Body To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28460 - Thermostat To Oil Cooler

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18461 - Oil Cooler To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80415 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19898 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23797 - Heater Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X