1994 Oldsmobile Achieva Engine Coolant Bypass Hose

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 19026

Gates Engine Coolant Bypass Hose 19026

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1994 Oldsmobile Achieva Engines.
Engine Sub Model Notes Fit Notes
3.1L V6 S, SC, SL Molded Heater Hose Fuel Type: GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
3.1L V6	S, SC, SL	Molded Heater Hose	Fuel Type: GAS

Part Name: Engine Coolant Bypass HoseBrand: DaycoPart#: 71692

1994 Oldsmobile Achieva Engine Coolant Bypass Hose DY 71692

Dayco Engine Coolant Bypass Hose 71692

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 4
End 1 Inside Diameter : 9/16
End 2 Inside Diameter : 9/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1994 Oldsmobile Achieva Engines.
Engine Sub Model Notes
3.1L V6 S, SC, SL Curved Radiator Hose
Part Interchange
ACDelco 14156S
CARQUEST 19026
Duralast A71692
Freshstart 4392
Gates 19026
Gates 18434
General Motors 10182356
General Motors 12600100
Goodyear 63121
Isuzu 8-97088-139-0
NAPA 11026
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes
3.1L V6	S, SC, SL	Curved Radiator Hose

Part Name: Engine Coolant Bypass HoseBrand: DaycoPart#: 86819

1994 Oldsmobile Achieva Engine Coolant Bypass Hose DY 86819

Dayco Engine Coolant Bypass Hose 86819 - Pipe To Tank

Position: Pipe To Tank

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1994 Oldsmobile Achieva Engines.
Engine Sub Model Notes Position
2.3L L4 S, SC, SL Small I.D. Heater Hose Pipe To Tank
Part Interchange
ACDelco 14372S
ACDelco 16393M
CARQUEST 18247
Duralast E86819
Gates 18288
Gates 18247
General Motors 22593878
General Motors 22593876
NAPA 10288
NAPA 10247
Toyota 16261-46020
Toyota 16261-62060
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	S, SC, SL	Small I.D. Heater Hose	Pipe To Tank

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 18247

1994 Oldsmobile Achieva Engine Coolant Bypass Hose ZO 18247

Gates Engine Coolant Bypass Hose 18247 - Tank To Engine

Position: Tank To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.9
Inside Diameter 1 : .33
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1994 Oldsmobile Achieva Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 S, SC, SL Molded Heater Hose Fuel Type: GAS Tank To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	S, SC, SL	Molded Heater Hose	Fuel Type: GAS	Tank To Engine

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 28408

1994 Oldsmobile Achieva Engine Coolant Bypass Hose ZO 28408

Gates Engine Coolant Bypass Hose 28408 - Tank To Radiator

Position: Tank To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1994 Oldsmobile Achieva Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	S, SC, SL	Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tank To Radiator
3.1L V6	S, SC, SL	Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tank To Radiator

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1994 Oldsmobile Achieva Engine Coolant Bypass Hose

Gates Engine Coolant Bypass Hose 19026

Description:

Part Specifications:

Features:

Dayco Engine Coolant Bypass Hose 71692

Description:

Part Specifications:

Features:

Dayco Engine Coolant Bypass Hose 86819 - Pipe To Tank

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 18247 - Tank To Engine

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 28408 - Tank To Radiator

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

ACDelco	14156S
CARQUEST	19026
Duralast	A71692
Freshstart	4392
Gates	19026
Gates	18434
General Motors	10182356
General Motors	12600100
Goodyear	63121
Isuzu	8-97088-139-0
NAPA	11026

ACDelco	14372S
ACDelco	16393M
CARQUEST	18247
Duralast	E86819
Gates	18288
Gates	18247
General Motors	22593878
General Motors	22593876
NAPA	10288
NAPA	10247
Toyota	16261-46020
Toyota	16261-62060

My Vehicle:

1994 Oldsmobile Achieva Engine Coolant Bypass Hose

Gates Engine Coolant Bypass Hose 19026

Description:

Part Specifications:

Features:

Dayco Engine Coolant Bypass Hose 71692

Description:

Part Specifications:

Features:

Dayco Engine Coolant Bypass Hose 86819 - Pipe To Tank

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 18247 - Tank To Engine

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 28408 - Tank To Radiator

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X