2002 Oldsmobile Bravada HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87851

Dayco HVAC Heater Hose 87851 - Heater To Tee

Position: Heater To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10-1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Position
4.2L L6 Base w/Aux. Heater - Small I.D. Heater Hose Heater To Tee

Engine	Sub Model	Notes	Position
4.2L L6	Base	w/Aux. Heater - Small I.D. Heater Hose	Heater To Tee

Part Interchange

ACDelco	14153S
ACDelco	20496S
ACDelco	14138S
CARQUEST	19023
CARQUEST	18952
CARQUEST	23333
Duralast	C87851
Gates	19023
Gates	23333
Gates	18952
General Motors	15832905
General Motors	19129948
General Motors	15138450
NAPA	11023
NAPA	16071
NAPA	10952

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18453

2002 Oldsmobile Bravada HVAC Heater Hose ZO 18453

Gates HVAC Heater Hose 18453 - Tee To Engine

Position: Tee To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .58
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87864

2002 Oldsmobile Bravada HVAC Heater Hose DY 87864

Dayco HVAC Heater Hose 87864 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Position
4.2L L6 Base w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe-1
Part Interchange
ACDelco 14257S
CARQUEST 19193
Duralast C87864
Ford XL3H-18K579-AA
Gates 19193
General Motors 89019080
Goodyear 63991
NAPA 11193
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.2L L6	Base	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2002 Oldsmobile Bravada HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Pipe-2 To Auxiliary Heater

Position: Pipe-2 To Auxiliary Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-2 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18797

2002 Oldsmobile Bravada HVAC Heater Hose ZO 18797

Gates HVAC Heater Hose 18797 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18846

2002 Oldsmobile Bravada HVAC Heater Hose ZO 18846

Gates HVAC Heater Hose 18846 - Pipe-3 To Valve

Position: Pipe-3 To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-3 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 18952

2002 Oldsmobile Bravada HVAC Heater Hose ZO 18952

Gates HVAC Heater Hose 18952 - Heater To Tee

Position: Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.2
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19193

2002 Oldsmobile Bravada HVAC Heater Hose ZO 19193

Gates HVAC Heater Hose 19193 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 18856

2002 Oldsmobile Bravada HVAC Heater Hose ZO 18856

Gates HVAC Heater Hose 18856 - Tee To Intake Manifold

Position: Tee To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2002 Oldsmobile Bravada HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base Cut to Length, 35" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	Cut to Length, 35" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2002 Oldsmobile Bravada HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater To Pipe-3

Position: Auxiliary Heater To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base Cut to Length, 15" - Straight Heater Hose (Standard) Fuel Type: GAS Auxiliary Heater To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L L6	Base	Cut to Length, 15" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater To Pipe-3

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2002 Oldsmobile Bravada HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Pipe-4 To Engine, Valve To Connector

Position: Pipe-4 To Engine, Valve To Connector

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Oldsmobile Bravada Engines.
Engine Sub Model Notes Fit Notes Position
4.2L L6 Base W/Aux. Heater; Cut to Length, 11" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-4 To Engine, Valve To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14257S
CARQUEST	19193
Duralast	C87864
Ford	XL3H-18K579-AA
Gates	19193
General Motors	89019080
Goodyear	63991
NAPA	11193

My Vehicle:

2002 Oldsmobile Bravada HVAC Heater Hose

Dayco HVAC Heater Hose 87851 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18453 - Tee To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87864 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18797 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18846 - Pipe-3 To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18952 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19193 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18856 - Tee To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater To Pipe-3

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Pipe-4 To Engine, Valve To Connector

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X