2005 Pontiac Bonneville HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71681

Dayco HVAC Heater Hose 71681 - Heater To Pipe

Position: Heater To Pipe

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Position
4.6L V8 GXP Curved Radiator Hose Heater To Pipe

Engine	Sub Model	Notes	Position
4.6L V8	GXP	Curved Radiator Hose	Heater To Pipe

Part Interchange

ACDelco	14401S
CARQUEST	19326
Duralast	A71681
Ford	F32Z-8597-C
Gates	19326
General Motors	25681953
General Motors	94854869
General Motors	15984156
Goodyear	63041
Honda	79723-S2A-A01
Mazda	FS60-15-288
Mazda	FS01-15-288
Motorcraft	KM2465
NAPA	11326
Toyota	87245-33610

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87903

2005 Pontiac Bonneville HVAC Heater Hose DY 87903

Dayco HVAC Heater Hose 87903 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Position
4.6L V8 GXP Small I.D. Heater Hose Reservoir To Pipe
Part Interchange
Duralast B87903
General Motors 25748907
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.6L V8	GXP	Small I.D. Heater Hose	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19279

2005 Pontiac Bonneville HVAC Heater Hose ZO 19279

Gates HVAC Heater Hose 19279 - Pipe-4 To Pipe-5

Position: Pipe-4 To Pipe-5

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Molded Heater Hose Fuel Type: GAS Pipe-4 To Pipe-5
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Pipe-5

Part Name: HVAC Heater HoseBrand: GatesPart#: 18324

2005 Pontiac Bonneville HVAC Heater Hose ZO 18324

Gates HVAC Heater Hose 18324 - Pipe-5 To Reservoir

Position: Pipe-5 To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .36
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Molded Heater Hose Fuel Type: GAS Pipe-5 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Molded Heater Hose	Fuel Type: GAS	Pipe-5 To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87785

2005 Pontiac Bonneville HVAC Heater Hose DY 87785

Dayco HVAC Heater Hose 87785 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Position
3.8L V6 SE, SLE Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.8L V6	SE, SLE	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	18249L
ACDelco	16251M
CARQUEST	19097
CARQUEST	19151
Duralast	E87785
Gates	19151
Gates	19097
General Motors	25687594
General Motors	25662698
General Motors	25661977
General Motors	25617699
Honda	79721-S02-A00
NAPA	11151
NAPA	11097

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18230

2005 Pontiac Bonneville HVAC Heater Hose ZO 18230

Gates HVAC Heater Hose 18230 - Reservoir To Pipe-6

Position: Reservoir To Pipe-6

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.8
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Cut to fit - Molded Heater Hose Fuel Type: GAS Reservoir To Pipe-6
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Reservoir To Pipe-6

Part Name: HVAC Heater HoseBrand: GatesPart#: 18782

2005 Pontiac Bonneville HVAC Heater Hose ZO 18782

Gates HVAC Heater Hose 18782 - Pipe-4 To Heater

Position: Pipe-4 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-4 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19035

2005 Pontiac Bonneville HVAC Heater Hose ZO 19035

Gates HVAC Heater Hose 19035 - Pipe-6 To Water Inlet

Position: Pipe-6 To Water Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-6 To Water Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-6 To Water Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88416

2005 Pontiac Bonneville HVAC Heater Hose DY 88416

Dayco HVAC Heater Hose 88416 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18 1/2
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Position
3.8L V6 SE, SLE Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18188L
CARQUEST 19759
Duralast D88416
Gates 19759
General Motors 25699450
General Motors 10365402
General Motors 25699447
General Motors 15804407
Goodyear 64173
NAPA 11759
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	SE, SLE	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

2005 Pontiac Bonneville HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Pipe To Pipe (Outlet)

Position: Pipe To Pipe (Outlet)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Position
4.6L V8 GXP Small I.D. Heater Hose Pipe To Pipe (Outlet)

Engine	Sub Model	Notes	Position
4.6L V8	GXP	Small I.D. Heater Hose	Pipe To Pipe (Outlet)

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19658

2005 Pontiac Bonneville HVAC Heater Hose ZO 19658

Gates HVAC Heater Hose 19658 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.8
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	GXP	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19759

2005 Pontiac Bonneville HVAC Heater Hose ZO 19759

Gates HVAC Heater Hose 19759 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.3
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 SE, SLE Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	SE, SLE	Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18569

2005 Pontiac Bonneville HVAC Heater Hose ZO 18569

Gates HVAC Heater Hose 18569 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.4
Inside Diameter 1 : .61
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 SE, SLE Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	SE, SLE	Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2005 Pontiac Bonneville HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 SE, SLE Cut to Length, 28" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	SE, SLE	Cut to Length, 28" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2005 Pontiac Bonneville HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Thermostat To Pipe-3

Position: Thermostat To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Bonneville Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 GXP Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Thermostat To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18188L
CARQUEST	19759
Duralast	D88416
Gates	19759
General Motors	25699450
General Motors	10365402
General Motors	25699447
General Motors	15804407
Goodyear	64173
NAPA	11759

My Vehicle:

2005 Pontiac Bonneville HVAC Heater Hose

Dayco HVAC Heater Hose 71681 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87903 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19279 - Pipe-4 To Pipe-5

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18324 - Pipe-5 To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87785 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18230 - Reservoir To Pipe-6

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18782 - Pipe-4 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19035 - Pipe-6 To Water Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88416 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Pipe To Pipe (Outlet)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19658 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19759 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18569 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Thermostat To Pipe-3

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X