1993 Pontiac Firebird HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87612

Dayco HVAC Heater Hose 87612 - Pipe To Water Pump

Position: Pipe To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Position
3.4L V6 Base Small I.D. Heater Hose Pipe To Water Pump
Part Interchange
ACDelco 14006S
CARQUEST 18080
Duralast B87612
Ford F8RZ-8548-EC
Ford 98BB-8548-DA
Ford F8RZ-8548-DA
Freshstart 3035
Gates 18080
Goodyear 63030
Motorcraft KM4403
Motorcraft KM4346
NAPA 10080
V&W 303612
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	Small I.D. Heater Hose	Pipe To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

1993 Pontiac Firebird HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Valve To Water Pump

Position: Valve To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Formula, Trans Am Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Valve To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Formula, Trans Am	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Valve To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87701

1993 Pontiac Firebird HVAC Heater Hose DY 87701

Dayco HVAC Heater Hose 87701 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 26
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Position
5.7L V8 Formula, Trans Am Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 18054L
CARQUEST 18876
Duralast E87701
Freshstart 4349
Gates 18876
General Motors 14042880
General Motors 10135310
Goodyear 63085
Honda 39312-SF0-000
NAPA 10876
V&W 303701
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	Formula, Trans Am	Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18080

1993 Pontiac Firebird HVAC Heater Hose ZO 18080

Gates HVAC Heater Hose 18080 - Pipe-4 To Water Pump

Position: Pipe-4 To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-4 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1993 Pontiac Firebird HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Tee To Water Pump

Position: Tee To Water Pump

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Formula, Trans Am Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Tee To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Formula, Trans Am	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 72001

1993 Pontiac Firebird HVAC Heater Hose DY 72001

Dayco HVAC Heater Hose 72001 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Position
3.4L V6 Base Cut to Fit - Curved Radiator Hose Heater To Pipe-1
Part Interchange
ACDelco 16171M
CARQUEST 19673
Duralast E72001
Gates 19673
General Motors 19259179
General Motors 10405608
General Motors 10289773
NAPA 11673
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	Cut to Fit - Curved Radiator Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 18079

1993 Pontiac Firebird HVAC Heater Hose ZO 18079

Gates HVAC Heater Hose 18079 - Oil Cooler Pipe To Radiator

Position: Oil Cooler Pipe To Radiator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Formula, Trans Am Cut to fit - Molded Heater Hose Fuel Type: GAS Oil Cooler Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Formula, Trans Am	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Oil Cooler Pipe To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 19673

1993 Pontiac Firebird HVAC Heater Hose ZO 19673

Gates HVAC Heater Hose 19673 - Heater To Pipe-1, Heater To Pipe-2

Position: Heater To Pipe-1, Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.6
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
5.7L V8 Formula, Trans Am Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1
5.7L V8	Formula, Trans Am	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18960

1993 Pontiac Firebird HVAC Heater Hose ZO 18960

Gates HVAC Heater Hose 18960 - Pipe-3 To Pipe-4

Position: Pipe-3 To Pipe-4

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Molded Heater Hose Fuel Type: GAS Pipe-3 To Pipe-4
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Pipe-4

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88420

1993 Pontiac Firebird HVAC Heater Hose DY 88420

Dayco HVAC Heater Hose 88420 - Pipe To Valve

Position: Pipe To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 23
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Position
5.7L V8 Formula, Trans Am Cut to Fit - w/A.C. - Small I.D. Heater Hose Pipe To Valve
Part Interchange
ACDelco 16242M
CARQUEST 19780
Datsun/Nissan 94200-4Z700
Datsun/Nissan 92400-8J000
Datsun/Nissan 92400-4Z700
Duralast E88420
Gates 19780
General Motors 10146991
NAPA 11780
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	Formula, Trans Am	Cut to Fit - w/A.C. - Small I.D. Heater Hose	Pipe To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19780

1993 Pontiac Firebird HVAC Heater Hose ZO 19780

Gates HVAC Heater Hose 19780 - Pipe-2 To Valve

Position: Pipe-2 To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.3
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Formula, Trans Am Molded Heater Hose Fuel Type: GAS Pipe-2 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Formula, Trans Am	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88448

1993 Pontiac Firebird HVAC Heater Hose DY 88448

Dayco HVAC Heater Hose 88448 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Pontiac Firebird Engines.
Engine Sub Model Notes Position
3.4L V6 Base Small I.D. Heater Hose Heater To Pipe-2
Part Interchange
ACDelco 18247L
CARQUEST 19740
Duralast E88448
Ford F58Z-18472-A
Ford F58H-18K579-AA
Gates 19740
NAPA 11740
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	Small I.D. Heater Hose	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1993 Pontiac Firebird HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Tee To Intake Manifold, Throttle Body To Engine, Water Pump To Throttle Body

Position: Tee To Intake Manifold, Throttle Body To Engine, Water Pump To Throttle Body

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Pontiac Firebird Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Engine, Water Pump To Throttle Body
5.7L V8	Formula, Trans Am	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1993 Pontiac Firebird HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Pipe-3, Water Pump To Pipe

Position: Heater To Pipe-1, Heater To Pipe-3, Water Pump To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Pontiac Firebird Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to Length, 4" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Pipe-3
5.7L V8	Formula, Trans Am	Cut to Length, 15" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Pipe-1, Water Pump To Pipe

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14006S
CARQUEST	18080
Duralast	B87612
Ford	F8RZ-8548-EC
Ford	98BB-8548-DA
Ford	F8RZ-8548-DA
Freshstart	3035
Gates	18080
Goodyear	63030
Motorcraft	KM4403
Motorcraft	KM4346
NAPA	10080
V&W	303612

ACDelco	18054L
CARQUEST	18876
Duralast	E87701
Freshstart	4349
Gates	18876
General Motors	14042880
General Motors	10135310
Goodyear	63085
Honda	39312-SF0-000
NAPA	10876
V&W	303701

ACDelco	16171M
CARQUEST	19673
Duralast	E72001
Gates	19673
General Motors	19259179
General Motors	10405608
General Motors	10289773
NAPA	11673

ACDelco	16242M
CARQUEST	19780
Datsun/Nissan	94200-4Z700
Datsun/Nissan	92400-8J000
Datsun/Nissan	92400-4Z700
Duralast	E88420
Gates	19780
General Motors	10146991
NAPA	11780

ACDelco	18247L
CARQUEST	19740
Duralast	E88448
Ford	F58Z-18472-A
Ford	F58H-18K579-AA
Gates	19740
NAPA	11740

My Vehicle:

1993 Pontiac Firebird HVAC Heater Hose

Dayco HVAC Heater Hose 87612 - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Valve To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87701 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18080 - Pipe-4 To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Tee To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 72001 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18079 - Oil Cooler Pipe To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19673 - Heater To Pipe-1, Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18960 - Pipe-3 To Pipe-4

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88420 - Pipe To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19780 - Pipe-2 To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88448 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Tee To Intake Manifold, Throttle Body To Engine, Water Pump To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Pipe-3, Water Pump To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X