1990 Pontiac Grand Am HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18831

Gates HVAC Heater Hose 18831 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE Protective sleeve required - Molded Heater Hose Fuel Type: GAS Heater To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE	Protective sleeve required - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87709

1990 Pontiac Grand Am HVAC Heater Hose DY 87709

Dayco HVAC Heater Hose 87709 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Position
2.3L L4 LE, SE Protective Sleeve Req'd. - Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 18061L
CARQUEST 18889
Duralast E87709
Freshstart 4437
Gates 18889
General Motors 22539286
General Motors 10168730
Goodyear 63164
NAPA 10889
V&W 303709
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	LE, SE	Protective Sleeve Req'd. - Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19606

1990 Pontiac Grand Am HVAC Heater Hose ZO 19606

Gates HVAC Heater Hose 19606 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 LE, SE Protective sleeve required; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	LE, SE	Protective sleeve required; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88361

1990 Pontiac Grand Am HVAC Heater Hose DY 88361

Dayco HVAC Heater Hose 88361 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Position
2.5L L4 LE Protective Sleeve Req'd. - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.5L L4	LE	Protective Sleeve Req'd. - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16416M
ACDelco	18120L
ACDelco	16511M
ACDelco	18123L
CARQUEST	19627
CARQUEST	19906
CARQUEST	19843
CARQUEST	19614
Chrysler	04596596AC
Duralast	E88361
Ford	F58H-18K580-AA
Freshstart	4399
Gates	19906
Gates	19843
Gates	19627
Gates	19614
General Motors	22551241
General Motors	22537053
General Motors	10037866
General Motors	10024078
Goodyear	63128
NAPA	11843
NAPA	11627
NAPA	11614
NAPA	11906
V&W	304361

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18889

1990 Pontiac Grand Am HVAC Heater Hose ZO 18889

Gates HVAC Heater Hose 18889 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 LE, SE Protective sleeve required - Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	LE, SE	Protective sleeve required - Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19614

1990 Pontiac Grand Am HVAC Heater Hose ZO 19614

Gates HVAC Heater Hose 19614 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Grand Am Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE Protective sleeve required - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1990 Pontiac Grand Am HVAC Heater Hose

Gates HVAC Heater Hose 18831 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87709 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19606 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88361 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18889 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19614 - Heater To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18061L
CARQUEST	18889
Duralast	E87709
Freshstart	4437
Gates	18889
General Motors	22539286
General Motors	10168730
Goodyear	63164
NAPA	10889
V&W	303709

My Vehicle:

1990 Pontiac Grand Am HVAC Heater Hose

Gates HVAC Heater Hose 18831 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87709 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19606 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88361 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18889 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19614 - Heater To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X