2006 Pontiac Grand Prix HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87922

Dayco HVAC Heater Hose 87922 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Position
5.3L V8 GXP Small I.D. Heater Hose Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.3L V8	GXP	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87901

2006 Pontiac Grand Prix HVAC Heater Hose DY 87901

Dayco HVAC Heater Hose 87901 - Heater To Engine (Lower)

Position: Heater To Engine (Lower)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Position
3.8L V6 Base, GT Small I.D. Heater Hose Heater To Engine (Lower)
Part Interchange
ACDelco 18315L
CARQUEST 19321
Duralast E87901
Gates 19321
General Motors 10387715
General Motors 10333865
NAPA 11321
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	Base, GT	Small I.D. Heater Hose	Heater To Engine (Lower)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87902

2006 Pontiac Grand Prix HVAC Heater Hose DY 87902

Dayco HVAC Heater Hose 87902 - Heater To Engine (Upper)

Position: Heater To Engine (Upper)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Position
3.8L V6 Base, GT Small I.D. Heater Hose Heater To Engine (Upper)
Part Interchange
ACDelco 18314L
CARQUEST 19320
Duralast E87902
Gates 19320
General Motors 10317834
NAPA 11320
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.8L V6	Base, GT	Small I.D. Heater Hose	Heater To Engine (Upper)

Part Name: HVAC Heater HoseBrand: GatesPart#: 19321

2006 Pontiac Grand Prix HVAC Heater Hose ZO 19321

Gates HVAC Heater Hose 19321 - Heater To Engine (Lower)

Position: Heater To Engine (Lower)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.7
Inside Diameter 1 : .64
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, GT Molded Heater Hose Fuel Type: GAS Heater To Engine (Lower)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, GT	Molded Heater Hose	Fuel Type: GAS	Heater To Engine (Lower)

Part Name: HVAC Heater HoseBrand: GatesPart#: 19320

2006 Pontiac Grand Prix HVAC Heater Hose ZO 19320

Gates HVAC Heater Hose 19320 - Heater To Engine (Upper)

Position: Heater To Engine (Upper)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.4
Inside Diameter 1 : .64
Inside Diameter 2 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base, GT Molded Heater Hose Fuel Type: GAS Heater To Engine (Upper)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, GT	Molded Heater Hose	Fuel Type: GAS	Heater To Engine (Upper)

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2006 Pontiac Grand Prix HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Radiator To Radiator Filler Neck

Position: Radiator To Radiator Filler Neck

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 GXP Cut to Length, 14" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Radiator Filler Neck
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.3L V8	GXP	Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Radiator Filler Neck

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2006 Pontiac Grand Prix HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Connector To Radiator Filler Neck, Reservoir To Connector, Reservoir To Radiator

Position: Connector To Radiator Filler Neck, Reservoir To Connector, Reservoir To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2006 Pontiac Grand Prix Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base, GT	Cut to Length, 20" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator
5.3L V8	GXP	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: GAS	Connector To Radiator Filler Neck, Reservoir To Connector

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2006 Pontiac Grand Prix HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-1 To Water Pump, Water Pump To Pipe-2

Position: Pipe-1 To Water Pump, Water Pump To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Grand Prix Engines.
Engine Sub Model Notes Fit Notes Position
5.3L V8 GXP Cut to Length, 10" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-1 To Water Pump, Water Pump To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2006 Pontiac Grand Prix HVAC Heater Hose

Dayco HVAC Heater Hose 87922 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87901 - Heater To Engine (Lower)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87902 - Heater To Engine (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19321 - Heater To Engine (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19320 - Heater To Engine (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Radiator To Radiator Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Connector To Radiator Filler Neck, Reservoir To Connector, Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-1 To Water Pump, Water Pump To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	18315L
CARQUEST	19321
Duralast	E87901
Gates	19321
General Motors	10387715
General Motors	10333865
NAPA	11321

ACDelco	18314L
CARQUEST	19320
Duralast	E87902
Gates	19320
General Motors	10317834
NAPA	11320

My Vehicle:

2006 Pontiac Grand Prix HVAC Heater Hose

Dayco HVAC Heater Hose 87922 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87901 - Heater To Engine (Lower)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87902 - Heater To Engine (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19321 - Heater To Engine (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19320 - Heater To Engine (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Radiator To Radiator Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Connector To Radiator Filler Neck, Reservoir To Connector, Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-1 To Water Pump, Water Pump To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X