2005 Pontiac Montana HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87828

Dayco HVAC Heater Hose 87828 - Connector To Tee-1

Position: Connector To Tee-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Dual Heater & A.C. - Small I.D. Heater Hose Connector To Tee-1

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Dual Heater & A.C. - Small I.D. Heater Hose	Connector To Tee-1

Part Interchange

ACDelco	16216M
ACDelco	16057M
ACDelco	16580M
CARQUEST	18783
CARQUEST	19175
CARQUEST	18516
Chrysler	55056618AA
Duralast	E87828
Gates	18783
Gates	19175
Gates	18516
General Motors	15128104
Honda	79725-S10-K01
Hyundai	97212-2E000
Hyundai	97312-2E000
NAPA	10516
NAPA	10783
NAPA	11175

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87625

2005 Pontiac Montana HVAC Heater Hose DY 87625

Dayco HVAC Heater Hose 87625 - Pipe To Tee

Position: Pipe To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Aux. Heater - Small I.D. Heater Hose Pipe To Tee

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Aux. Heater - Small I.D. Heater Hose	Pipe To Tee

Part Interchange

ACDelco	14563S
ACDelco	14130S
ACDelco	14256S
ACDelco	14258S
ACDelco	14083S
CARQUEST	18041
CARQUEST	19190
CARQUEST	19152
CARQUEST	18925
CARQUEST	18738
Duralast	B87625
Ford	XR3E-8A582-AC
Freshstart	4492
Gates	19152
Gates	18925
Gates	19190
Gates	18041
Gates	18738
Goodyear	64106
Goodyear	63219
Honda	79722-SDR-A00
Mitsubishi	MR465186
NAPA	11190
NAPA	10738
NAPA	10925
NAPA	10041
NAPA	11152
Toyota	16265-15020
V&W	303625

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19057

2005 Pontiac Montana HVAC Heater Hose ZO 19057

Gates HVAC Heater Hose 19057 - Pipe-2 To Heater

Position: Pipe-2 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.9
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 SV6 W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	SV6	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87614

2005 Pontiac Montana HVAC Heater Hose DY 87614

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.5L V6 SV6 w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.5L V6	SV6	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	18008L
ACDelco	16354M
ACDelco	16276M
CARQUEST	18082
CARQUEST	18450
Duralast	E87614
Ford	F8RZ-18472-HA
Ford	98BB-18K582-HB
Ford	F8RZ-18472-AA
Freshstart	4365
Gates	19343
Gates	23335
Gates	18082
Gates	18450
General Motors	89023413
General Motors	90573890
General Motors	96539582
General Motors	19129959
General Motors	15187987
General Motors	22704431
Goodyear	63102
NAPA	11343
NAPA	10450
NAPA	10082
NAPA	16073
V&W	303614

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19402

2005 Pontiac Montana HVAC Heater Hose ZO 19402

Gates HVAC Heater Hose 19402 - Tee-1 To Auxiliary Heater

Position: Tee-1 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 SV6 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-1 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	SV6	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

2005 Pontiac Montana HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Auxiliary Heater Pipe-2 To Auxiliary Heater, Auxiliary Heater To Pipe-3

Position: Auxiliary Heater Pipe-2 To Auxiliary Heater, Auxiliary Heater To Pipe-3

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base 90º Molded Heater Hose Fuel Type: GAS Auxiliary Heater Pipe-2 To Auxiliary Heater, Auxiliary Heater To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Auxiliary Heater, Auxiliary Heater To Pipe-3

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2005 Pontiac Montana HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Engine To Tee, Heater To Tee, Heater To Tee-1, Heater To Tee-2

Position: Engine To Tee, Heater To Tee, Heater To Tee-1, Heater To Tee-2

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Aux. Heater - 90? Molded Coolant Hose Heater To Tee
3.5L V6 SV6 90? Molded Coolant Hose Engine To Tee, Heater To Tee-1, Heater To Tee-2

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Aux. Heater - 90? Molded Coolant Hose	Heater To Tee
3.5L V6	SV6	90? Molded Coolant Hose	Engine To Tee, Heater To Tee-1, Heater To Tee-2

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87603

2005 Pontiac Montana HVAC Heater Hose DY 87603

Dayco HVAC Heater Hose 87603 - Heater To Tee (Inlet), Tee To Engine

Position: Heater To Tee (Inlet), Tee To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Dual Heater - Small I.D. Heater Hose Heater To Tee (Inlet)
3.5L V6 SV6 Small I.D. Heater Hose Tee To Engine

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Dual Heater - Small I.D. Heater Hose	Heater To Tee (Inlet)
3.5L V6	SV6	Small I.D. Heater Hose	Tee To Engine

Part Interchange

ACDelco	14004S
CARQUEST	18070
Datsun/Nissan	27144-01P00
Duralast	B87603
Ford	3W7Z-18472-BA
Ford	F8WZ-18472-BA
Gates	18070
General Motors	10284262
General Motors	10080350
General Motors	10145101
NAPA	10070
Saturn	19130282
V&W	303603

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18453

2005 Pontiac Montana HVAC Heater Hose ZO 18453

Gates HVAC Heater Hose 18453 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .58
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 SV6 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	SV6	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

2005 Pontiac Montana HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2005 Pontiac Montana HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Tee-1

Position: Heater To Tee-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87836

2005 Pontiac Montana HVAC Heater Hose DY 87836

Dayco HVAC Heater Hose 87836 - Tee To Engine

Position: Tee To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Aux. Heater - Small I.D. Heater Hose Tee To Engine
Part Interchange
Duralast C87836
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Aux. Heater - Small I.D. Heater Hose	Tee To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87744

2005 Pontiac Montana HVAC Heater Hose DY 87744

Dayco HVAC Heater Hose 87744 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.5L V6 SV6 w/o Aux. Heater - Small I.D. Heater Hose Heater Hose
Part Interchange
ACDelco 18111L
CARQUEST 19057
Duralast E87744
Ford 96BB-18C553-AA
Ford 95BB-18C553-CA
Ford F6RZ-18B402-AA
Ford F5RZ-18B4702-A
Ford F5RZ-18B402-A
Gates 19057
General Motors 89023412
General Motors 19129958
NAPA 11057
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	SV6	w/o Aux. Heater - Small I.D. Heater Hose	Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87835

2005 Pontiac Montana HVAC Heater Hose DY 87835

Dayco HVAC Heater Hose 87835 - Engine To Tee

Position: Engine To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base Small I.D. Heater Hose Engine To Tee
Part Interchange
Duralast B87835
General Motors 10324194
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	Small I.D. Heater Hose	Engine To Tee

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

2005 Pontiac Montana HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Heater To Pipe, Tee To Pipe

Position: Heater To Pipe, Tee To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/Aux. Heater - Small I.D. Heater Hose Tee To Pipe
3.5L V6 SV6 Short Hose - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/Aux. Heater - Small I.D. Heater Hose	Tee To Pipe
3.5L V6	SV6	Short Hose - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88425

2005 Pontiac Montana HVAC Heater Hose DY 88425

Dayco HVAC Heater Hose 88425 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. A protective sleeve is also made with this hose to protect contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/o Aux. Heater - Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 16321M
Duralast E88425
Gates 19287
General Motors 10307886
General Motors 10446210
General Motors 10307915
General Motors 10324108
General Motors 10442113
NAPA 11287
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19175

2005 Pontiac Montana HVAC Heater Hose ZO 19175

Gates HVAC Heater Hose 19175 - Tee-1 To Connector

Position: Tee-1 To Connector

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.8
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-1 To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Connector

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87832

2005 Pontiac Montana HVAC Heater Hose DY 87832

Dayco HVAC Heater Hose 87832 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. A protective sleeve is also made with this hose to protect contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Position
3.4L V6 Base w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16322M
CARQUEST 19288
Duralast D87832
Gates 19288
General Motors 88895125
General Motors 10307916
General Motors 10324109
NAPA 11288
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19226

2005 Pontiac Montana HVAC Heater Hose ZO 19226

Gates HVAC Heater Hose 19226 - Tee To Auxiliary Heater Pipe-2, Tee-2 To Auxiliary Heater, Tee-2 To Heater

Position: Tee To Auxiliary Heater Pipe-2, Tee-2 To Auxiliary Heater, Tee-2 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2005 Pontiac Montana Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Auxiliary Heater Pipe-2, Tee-2 To Heater
3.5L V6	SV6	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19190

2005 Pontiac Montana HVAC Heater Hose ZO 19190

Gates HVAC Heater Hose 19190 - Tee-2 To Connector, Tee-2 To Pipe-2

Position: Tee-2 To Connector, Tee-2 To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base Molded Heater Hose Fuel Type: GAS Tee-2 To Connector
3.5L V6 SV6 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-2 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Molded Heater Hose	Fuel Type: GAS	Tee-2 To Connector
3.5L V6	SV6	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19288

2005 Pontiac Montana HVAC Heater Hose ZO 19288

Gates HVAC Heater Hose 19288 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19287

2005 Pontiac Montana HVAC Heater Hose ZO 19287

Gates HVAC Heater Hose 19287 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.2
Inside Diameter 1 : .64
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19210

2005 Pontiac Montana HVAC Heater Hose ZO 19210

Gates HVAC Heater Hose 19210 - Auxiliary Heater Pipe-3 To Tee-2, Heater To Tee-2

Position: Auxiliary Heater Pipe-3 To Tee-2, Heater To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : .64
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2005 Pontiac Montana Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-3 To Tee-2
3.5L V6	SV6	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 23335

2005 Pontiac Montana HVAC Heater Hose ZO 23335

Gates HVAC Heater Hose 23335 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 SV6 W/O Aux. Heater - Molded Coolant Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	SV6	W/O Aux. Heater - Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2005 Pontiac Montana HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir, Throttle Body To Pipe-1

Position: Radiator To Reservoir, Throttle Body To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2005 Pontiac Montana Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base	Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir, Throttle Body To Pipe-1
3.5L V6	SV6	Cut to Length, 41" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2005 Pontiac Montana HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Tee-1 To Pipe-1

Position: Tee-1 To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Pontiac Montana Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 SV6 W/Aux. Heater; Cut to Length, 15" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-1 To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18111L
CARQUEST	19057
Duralast	E87744
Ford	96BB-18C553-AA
Ford	95BB-18C553-CA
Ford	F6RZ-18B402-AA
Ford	F5RZ-18B4702-A
Ford	F5RZ-18B402-A
Gates	19057
General Motors	89023412
General Motors	19129958
NAPA	11057

ACDelco	16321M
Duralast	E88425
Gates	19287
General Motors	10307886
General Motors	10446210
General Motors	10307915
General Motors	10324108
General Motors	10442113
NAPA	11287

ACDelco	16322M
CARQUEST	19288
Duralast	D87832
Gates	19288
General Motors	88895125
General Motors	10307916
General Motors	10324109
NAPA	11288

My Vehicle:

2005 Pontiac Montana HVAC Heater Hose

Dayco HVAC Heater Hose 87828 - Connector To Tee-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87625 - Pipe To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19057 - Pipe-2 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19402 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Auxiliary Heater Pipe-2 To Auxiliary Heater, Auxiliary Heater To Pipe-3

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Engine To Tee, Heater To Tee, Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87603 - Heater To Tee (Inlet), Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18453 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Tee-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87836 - Tee To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87744 - Heater Hose

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87835 - Engine To Tee

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Heater To Pipe, Tee To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88425 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19175 - Tee-1 To Connector

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87832 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19226 - Tee To Auxiliary Heater Pipe-2, Tee-2 To Auxiliary Heater, Tee-2 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19190 - Tee-2 To Connector, Tee-2 To Pipe-2

Description: