2006 Pontiac Solstice HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19670

Gates HVAC Heater Hose 19670 - Oil Cooler To Tee-2

Position: Oil Cooler To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, GT, SE Cut to fit - Molded Heater Hose Fuel Type: GAS Oil Cooler To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, GT, SE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Oil Cooler To Tee-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88358

2006 Pontiac Solstice HVAC Heater Hose DY 88358

Dayco HVAC Heater Hose 88358 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Position
2.4L L4 Base Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.4L L4	Base	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16514M
ACDelco	18118L
CARQUEST	19913
CARQUEST	19611
Datsun/Nissan	92410-JA000
Datsun/Nissan	92410-JA00A
Datsun/Nissan	92410-ZX00A
Duralast	E88358
Gates	19913
Gates	19611
General Motors	1636469
General Motors	14034306
General Motors	1644881
General Motors	19129866
General Motors	1641782
Goodyear	64318
NAPA	11611
NAPA	11913
V&W	304358

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19603

2006 Pontiac Solstice HVAC Heater Hose ZO 19603

Gates HVAC Heater Hose 19603 - Tee-2 To Thermostat

Position: Tee-2 To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, GT, SE Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-2 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, GT, SE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 19611

2006 Pontiac Solstice HVAC Heater Hose ZO 19611

Gates HVAC Heater Hose 19611 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, GT, SE Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, GT, SE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 23333

2006 Pontiac Solstice HVAC Heater Hose ZO 23333

Gates HVAC Heater Hose 23333 - Thermostat To Heater

Position: Thermostat To Heater

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.5
Inside Diameter 1 : .62
Inside Diameter 2 : .73
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, GT, SE Molded Coolant Hose Fuel Type: GAS Thermostat To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, GT, SE	Molded Coolant Hose	Fuel Type: GAS	Thermostat To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2006 Pontiac Solstice HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Tee-2 To Reservoir

Position: Tee-2 To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Pontiac Solstice Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, GT, SE Cut to Length, 48" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-2 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2006 Pontiac Solstice HVAC Heater Hose

Gates HVAC Heater Hose 19670 - Oil Cooler To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19603 - Tee-2 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23333 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-2 To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2006 Pontiac Solstice HVAC Heater Hose

Gates HVAC Heater Hose 19670 - Oil Cooler To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88358 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19603 - Tee-2 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19611 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23333 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Tee-2 To Reservoir

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X