Home

1990 Pontiac Sunbird

My Vehicle:

1990 Pontiac Sunbird HVAC Heater Hose

We have found 8 HVAC Heater Hose for

1990 Pontiac Sunbird

Part Name: HVAC Heater HoseBrand: GatesPart#: 18704

Gates HVAC Heater Hose 18704 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GT, LE, SE Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	GT, LE, SE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87620

1990 Pontiac Sunbird HVAC Heater Hose DY 87620

Dayco HVAC Heater Hose 87620 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Position
2.0L L4 GT, LE, SE Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 14456S
ACDelco 16029M
CARQUEST 19415
CARQUEST 18704
Duralast D87620
Freshstart 63148
Gates 19415
Gates 18704
General Motors 10032491
Goodyear 63148
Hyundai 97311-2E700
NAPA 10704
NAPA 11415
V&W 303620
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	GT, LE, SE	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88387

1990 Pontiac Sunbird HVAC Heater Hose DY 88387

Dayco HVAC Heater Hose 88387 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Position
2.0L L4 GT, LE, SE Small I.D. Heater Hose Pipe To Engine
Part Interchange
ACDelco 14187S
CARQUEST 19670
Datsun/Nissan 92411-VZ00A
Datsun/Nissan 92413-JK70A
Duralast B88387
Freshstart 4345
Gates 19670
General Motors 25522996
General Motors 10028411
Goodyear 63081
NAPA 11670
V&W 304387
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	GT, LE, SE	Small I.D. Heater Hose	Pipe To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19670

1990 Pontiac Sunbird HVAC Heater Hose ZO 19670

Gates HVAC Heater Hose 19670 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GT, LE, SE Molded Heater Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	GT, LE, SE	Molded Heater Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28467

1990 Pontiac Sunbird HVAC Heater Hose ZO 28467

Gates HVAC Heater Hose 28467 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 16
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 12
Arm Length 2 : 304.8
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GT, LE, SE Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	GT, LE, SE	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88361

1990 Pontiac Sunbird HVAC Heater Hose DY 88361

Dayco HVAC Heater Hose 88361 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Position
2.0L L4 GT, SE, LE Small I.D. Heater Hose Intake Manifold To Heater

Engine	Sub Model	Notes	Position
2.0L L4	GT, SE, LE	Small I.D. Heater Hose	Intake Manifold To Heater

Part Interchange

ACDelco	16416M
ACDelco	18120L
ACDelco	16511M
ACDelco	18123L
CARQUEST	19627
CARQUEST	19906
CARQUEST	19843
CARQUEST	19614
Chrysler	04596596AC
Duralast	E88361
Ford	F58H-18K580-AA
Freshstart	4399
Gates	19906
Gates	19843
Gates	19627
Gates	19614
General Motors	22551241
General Motors	22537053
General Motors	10037866
General Motors	10024078
Goodyear	63128
NAPA	11843
NAPA	11627
NAPA	11614
NAPA	11906
V&W	304361

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18951

1990 Pontiac Sunbird HVAC Heater Hose ZO 18951

Gates HVAC Heater Hose 18951 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .62
Inside Diameter 2 : .8
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GT, LE, SE Molded Heater Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	GT, LE, SE	Molded Heater Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19614

1990 Pontiac Sunbird HVAC Heater Hose ZO 19614

Gates HVAC Heater Hose 19614 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1990 Pontiac Sunbird Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 GT, LE, SE Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14456S
ACDelco	16029M
CARQUEST	19415
CARQUEST	18704
Duralast	D87620
Freshstart	63148
Gates	19415
Gates	18704
General Motors	10032491
Goodyear	63148
Hyundai	97311-2E700
NAPA	10704
NAPA	11415
V&W	303620

ACDelco	14187S
CARQUEST	19670
Datsun/Nissan	92411-VZ00A
Datsun/Nissan	92413-JK70A
Duralast	B88387
Freshstart	4345
Gates	19670
General Motors	25522996
General Motors	10028411
Goodyear	63081
NAPA	11670
V&W	304387

My Vehicle:

1990 Pontiac Sunbird HVAC Heater Hose

Gates HVAC Heater Hose 18704 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87620 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88387 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19670 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28467 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88361 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18951 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19614 - Heater To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X