1992 Pontiac Trans Sport HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19232

Gates HVAC Heater Hose 19232 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.9
Inside Diameter 1 : .64
Inside Diameter 2 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18819

1992 Pontiac Trans Sport HVAC Heater Hose ZO 18819

Gates HVAC Heater Hose 18819 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88356

1992 Pontiac Trans Sport HVAC Heater Hose DY 88356

Dayco HVAC Heater Hose 88356 - Auxiliary Heater Pipe To Auxiliary Heater Pipe, Heater To Pipe

Position: Auxiliary Heater Pipe To Auxiliary Heater Pipe, Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/4
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 1992 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Position
3.1L V6	Base	Small I.D. Heater Hose	Auxiliary Heater Pipe To Auxiliary Heater Pipe
3.8L V6	Base	w/o Aux. Heater - Small I.D. Heater Hose	Auxiliary Heater Pipe To Auxiliary Heater Pipe, Heater To Pipe

Part Interchange

ACDelco	16145M
ACDelco	14523S
CARQUEST	19609
Duralast	C88356
Freshstart	4412
Gates	19609
Gates	19547
General Motors	10135686
General Motors	25910784
General Motors	1631559
Goodyear	63141
Hyundai	97311-3K500
Hyundai	97311-3K000
Kia	97311-2G500
NAPA	11547
NAPA	11609
V&W	304356

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1992 Pontiac Trans Sport HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Tee-2

Position: Heater To Tee-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1992 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2
3.8L V6	Base	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19615

1992 Pontiac Trans Sport HVAC Heater Hose ZO 19615

Gates HVAC Heater Hose 19615 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 40
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.1L V6 Base W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19609

1992 Pontiac Trans Sport HVAC Heater Hose ZO 19609

Gates HVAC Heater Hose 19609 - Heater To Pipe-1, Tee-1 To Pipe-1

Position: Heater To Pipe-1, Tee-1 To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.8L V6 Base W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1, Tee-1 To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.8L V6	Base	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Tee-1 To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1992 Pontiac Trans Sport HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2

Position: Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1992 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base	W/Aux. Heater; Cut to Length, 3 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2
3.8L V6	Base	W/Aux. Heater; Cut to Length, 3 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

1992 Pontiac Trans Sport HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1992 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.1L V6	Base	W/Aux. Heater; Cut to Length, 3 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Tee-1
3.8L V6	Base	W/Aux. Heater; Cut to Length, 3 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Tee-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1992 Pontiac Trans Sport HVAC Heater Hose

Gates HVAC Heater Hose 19232 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18819 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88356 - Auxiliary Heater Pipe To Auxiliary Heater Pipe, Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19615 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19609 - Heater To Pipe-1, Tee-1 To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Heater To Tee-1

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

1992 Pontiac Trans Sport HVAC Heater Hose

Gates HVAC Heater Hose 19232 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18819 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88356 - Auxiliary Heater Pipe To Auxiliary Heater Pipe, Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19615 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19609 - Heater To Pipe-1, Tee-1 To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Tee-1 To Auxiliary Heater Pipe-1, Tee-2 To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Heater To Tee-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X