1998 Pontiac Trans Sport HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18749

Gates HVAC Heater Hose 18749 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.9
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87675

1998 Pontiac Trans Sport HVAC Heater Hose DY 87675

Dayco HVAC Heater Hose 87675 - Tee To Pipe

Position: Tee To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Position
3.4L V6 Base, Montana Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose Tee To Pipe

Engine	Sub Model	Notes	Position
3.4L V6	Base, Montana	Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose	Tee To Pipe

Part Interchange

ACDelco	14245S
ACDelco	14122S
CARQUEST	19183
CARQUEST	18821
Chrysler	05005373AB
Chrysler	05005373AC
Chrysler	04596703AB
Duralast	C87675
Ford	F77Z-18472-KB
Ford	1R3H-18K580-C
Freshstart	4395
Gates	19183
Gates	18821
General Motors	10135306
General Motors	25525788
Goodyear	63124
NAPA	10821
NAPA	11183
Toyota	97209-0R040
Toyota	87245-42420
V&W	303675

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19152

1998 Pontiac Trans Sport HVAC Heater Hose ZO 19152

Gates HVAC Heater Hose 19152 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater, Tee-1 To Pipe-1

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater, Tee-1 To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1998 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater, Tee-1 To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86800

1998 Pontiac Trans Sport HVAC Heater Hose DY 86800

Dayco HVAC Heater Hose 86800 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Position
3.4L V6 Base, Montana 90 Degree Hose - Small I.D. Heater Hose Pipe To Throttle Body

Engine	Sub Model	Notes	Position
3.4L V6	Base, Montana	90 Degree Hose - Small I.D. Heater Hose	Pipe To Throttle Body

Part Interchange

ACDelco	14001S
CARQUEST	18020
Datsun/Nissan	14056-65Y10
Datsun/Nissan	14056-86G02
Datsun/Nissan	14056-D3310
Datsun/Nissan	14056-40F12
Datsun/Nissan	14056-88G02
Datsun/Nissan	14056-97000
Datsun/Nissan	14055-57Y12
Datsun/Nissan	14055-D4200
Datsun/Nissan	14056-30P21
Datsun/Nissan	14056-30P24
Datsun/Nissan	14056-30R16
Datsun/Nissan	14056-40F04
Duralast	B86800
Ford	F5TH-18C266-AB
Gates	18020
Goodyear	64310
Honda	19506-PC6-000
Honda	19508-PK2-000
Honda	19510-PH3-000
Honda	19511-PH3-J00
Honda	19511-PH3-000
Honda	19514-PJ0-660
NAPA	10020
Toyota	16264-16050
Toyota	16264-62030
Toyota	16267-16040
Toyota	16281-62010
Toyota	16267-76010
Toyota	16261-73070
V&W	302800

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18700

1998 Pontiac Trans Sport HVAC Heater Hose ZO 18700

Gates HVAC Heater Hose 18700 - Tee-2 To Auxiliary Heater Pipe-2

Position: Tee-2 To Auxiliary Heater Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-2 To Auxiliary Heater Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19022

1998 Pontiac Trans Sport HVAC Heater Hose ZO 19022

Gates HVAC Heater Hose 19022 - Heater To Tee-2

Position: Heater To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 5.2
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 70646

1998 Pontiac Trans Sport HVAC Heater Hose DY 70646

Dayco HVAC Heater Hose 70646 - Heater To Tee

Position: Heater To Tee

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 5 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Position
3.4L V6 Montana, Base w/Aux. Heater - Curved Radiator Hose Heater To Tee

Engine	Sub Model	Notes	Position
3.4L V6	Montana, Base	w/Aux. Heater - Curved Radiator Hose	Heater To Tee

Part Interchange

ACDelco	14213S
ACDelco	14152S
Atlas	642209
AutoZone	C0662
Autopar	RH138
CARQUEST	20662
CARQUEST	19022
Chief	C0662
Conoco	MH5
Datsun/Nissan	27146-01P00
Duralast	A70646
Ford	D5UZ-8597-A
Ford	D0OZ-8597-B
Ford	D00Z-8597-B
Ford	D9AE-8597-AA
Ford	D20E-8597-AA
Ford	D20E-8597-AB
Ford	D9ZE-8597-AA
Ford	E6LE-8597-AA
Ford	E6TZ-8597-B
Ford	E9AE-8597-AA
Ford	D9ZZ-8597-B
Ford	D00E-8597-B
Ford	D9AZ-8597-A
Ford	D9AZ-8597-B
Ford	D9AE-8597-BA
Ford	C9OZ-8597-B
Ford	C2OZ-8597-D
Ford	C9OZ-8597-A
Ford	C90Z-8597-B
Freshstart	3009
Gates	19022
Gates	20662
General Motors	10170732
Goodyear	BP726
Goodyear	63726
MasterPro	20662
Mopar	BH1511
Motorcraft	KM1083
Motorcraft	KM1081
Motorcraft	KM1634
Motorcraft	KM640
Motorcraft	KM644
Motorcraft	KM1082
NAPA	11022
NAPA	7447
Pirelli	MR867
Pirelli	43726
Pirelli	BP867
Texaco	CB8
Uniroyal	BP8
Uniroyal	CH491

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1998 Pontiac Trans Sport HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 19183

1998 Pontiac Trans Sport HVAC Heater Hose ZO 19183

Gates HVAC Heater Hose 19183 - Tee-2 To Pipe-2

Position: Tee-2 To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-2 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Pipe-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88406

1998 Pontiac Trans Sport HVAC Heater Hose DY 88406

Dayco HVAC Heater Hose 88406 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Position
3.4L V6 Base, Montana w/o Aux. Heater - Small I.D. Heater Hose Heater Inlet
Part Interchange
Duralast D88406
General Motors 10239238
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Base, Montana	w/o Aux. Heater - Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87764

1998 Pontiac Trans Sport HVAC Heater Hose DY 87764

Dayco HVAC Heater Hose 87764 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9 1/2
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Position
3.4L V6 Montana, Base w/o Aux. Heater - Small I.D. Heater Hose Heater Outlet
Part Interchange
Duralast D87764
General Motors 10239245
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Montana, Base	w/o Aux. Heater - Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

1998 Pontiac Trans Sport HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir, Throttle Body To Pipe-1

Position: Radiator To Reservoir, Throttle Body To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1998 Pontiac Trans Sport Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, Montana W/O Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir, Throttle Body To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/O Aux. Heater; Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir, Throttle Body To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1998 Pontiac Trans Sport HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Tee-1, Tee-1 To Auxiliary Heater Pipe-1

Position: Heater To Pipe-1, Heater To Tee-1, Tee-1 To Auxiliary Heater Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1998 Pontiac Trans Sport Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, Montana	W/Aux. Heater; Cut to Length, 8" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Pipe-1, Heater To Tee-1, Tee-1 To Auxiliary Heater Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1998 Pontiac Trans Sport HVAC Heater Hose

Gates HVAC Heater Hose 18749 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87675 - Tee To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19152 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater, Tee-1 To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86800 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18700 - Tee-2 To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19022 - Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 70646 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19183 - Tee-2 To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88406 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87764 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir, Throttle Body To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe-1, Heater To Tee-1, Tee-1 To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X