2005 Saturn Relay HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19057

Gates HVAC Heater Hose 19057 - Pipe-2 To Heater

Position: Pipe-2 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.9
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87614

2005 Saturn Relay HVAC Heater Hose DY 87614

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Position
3.5L V6 2, 3 w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.5L V6	2, 3	w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	18008L
ACDelco	16354M
ACDelco	16276M
CARQUEST	18082
CARQUEST	18450
Duralast	E87614
Ford	F8RZ-18472-HA
Ford	98BB-18K582-HB
Ford	F8RZ-18472-AA
Freshstart	4365
Gates	19343
Gates	23335
Gates	18082
Gates	18450
General Motors	89023413
General Motors	90573890
General Motors	96539582
General Motors	19129959
General Motors	15187987
General Motors	22704431
Goodyear	63102
NAPA	11343
NAPA	10450
NAPA	10082
NAPA	16073
V&W	303614

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19402

2005 Saturn Relay HVAC Heater Hose ZO 19402

Gates HVAC Heater Hose 19402 - Tee-1 To Auxiliary Heater

Position: Tee-1 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-1 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2005 Saturn Relay HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Engine To Tee, Heater To Tee-1, Heater To Tee-2

Position: Engine To Tee, Heater To Tee-1, Heater To Tee-2

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Position
3.5L V6 2, 3 90? Molded Coolant Hose Engine To Tee, Heater To Tee-1, Heater To Tee-2

Engine	Sub Model	Notes	Position
3.5L V6	2, 3	90? Molded Coolant Hose	Engine To Tee, Heater To Tee-1, Heater To Tee-2

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87603

2005 Saturn Relay HVAC Heater Hose DY 87603

Dayco HVAC Heater Hose 87603 - Tee To Engine

Position: Tee To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Position
3.5L V6 2, 3 Small I.D. Heater Hose Tee To Engine

Engine	Sub Model	Notes	Position
3.5L V6	2, 3	Small I.D. Heater Hose	Tee To Engine

Part Interchange

ACDelco	14004S
CARQUEST	18070
Datsun/Nissan	27144-01P00
Duralast	B87603
Ford	3W7Z-18472-BA
Ford	F8WZ-18472-BA
Gates	18070
General Motors	10284262
General Motors	10080350
General Motors	10145101
NAPA	10070
Saturn	19130282
V&W	303603

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18453

2005 Saturn Relay HVAC Heater Hose ZO 18453

Gates HVAC Heater Hose 18453 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .58
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87744

2005 Saturn Relay HVAC Heater Hose DY 87744

Dayco HVAC Heater Hose 87744 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Position
3.5L V6 2, 3 w/o Aux. Heater - Small I.D. Heater Hose Heater Hose
Part Interchange
ACDelco 18111L
CARQUEST 19057
Duralast E87744
Ford 96BB-18C553-AA
Ford 95BB-18C553-CA
Ford F6RZ-18B402-AA
Ford F5RZ-18B4702-A
Ford F5RZ-18B402-A
Gates 19057
General Motors 89023412
General Motors 19129958
NAPA 11057
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	2, 3	w/o Aux. Heater - Small I.D. Heater Hose	Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

2005 Saturn Relay HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Position
3.5L V6 2, 3 Long Hose - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.5L V6	2, 3	Long Hose - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19226

2005 Saturn Relay HVAC Heater Hose ZO 19226

Gates HVAC Heater Hose 19226 - Tee-2 To Auxiliary Heater

Position: Tee-2 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-2 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19190

2005 Saturn Relay HVAC Heater Hose ZO 19190

Gates HVAC Heater Hose 19190 - Tee-2 To Pipe-2

Position: Tee-2 To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-2 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19210

2005 Saturn Relay HVAC Heater Hose ZO 19210

Gates HVAC Heater Hose 19210 - Heater To Tee-2

Position: Heater To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : .64
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 23335

2005 Saturn Relay HVAC Heater Hose ZO 23335

Gates HVAC Heater Hose 23335 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/O Aux. Heater - Molded Coolant Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	W/O Aux. Heater - Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2005 Saturn Relay HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 Cut to Length, 41" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	2, 3	Cut to Length, 41" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2005 Saturn Relay HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Tee-1 To Pipe-1

Position: Tee-1 To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Saturn Relay Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 2, 3 W/Aux. Heater; Cut to Length, 15" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-1 To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18111L
CARQUEST	19057
Duralast	E87744
Ford	96BB-18C553-AA
Ford	95BB-18C553-CA
Ford	F6RZ-18B402-AA
Ford	F5RZ-18B4702-A
Ford	F5RZ-18B402-A
Gates	19057
General Motors	89023412
General Motors	19129958
NAPA	11057

My Vehicle:

2005 Saturn Relay HVAC Heater Hose

Gates HVAC Heater Hose 19057 - Pipe-2 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87614 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19402 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Engine To Tee, Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87603 - Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18453 - Heater To Tee-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87744 - Heater Hose

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19226 - Tee-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19190 - Tee-2 To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19210 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23335 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Tee-1 To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X