1997 Subaru Impreza HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18257

Gates HVAC Heater Hose 18257 - Throttle Body To Air Control Valve

Position: Throttle Body To Air Control Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 4.2
Inside Diameter 1 : .3
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Fit Notes Position
2.2L H4 Brighton, L, Outback Molded Heater Hose Fuel Type: GAS Throttle Body To Air Control Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L H4	Brighton, L, Outback	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Air Control Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86500

1997 Subaru Impreza HVAC Heater Hose DY 86500

Dayco HVAC Heater Hose 86500 - Throttle Body Inlet

Position: Throttle Body Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 1/4
End 2 Inside Diameter : 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Position
2.2L H4 Brighton, L, Outback Cut to Fit - Small I.D. Heater Hose Throttle Body Inlet
Part Interchange
ACDelco 14017S
ACDelco 14000S
CARQUEST 18125
CARQUEST 18010
Duralast B86500
Gates 18125
Gates 18010
General Motors 302650
General Motors 12556443
NAPA 10125
NAPA 10010
Toyota 17343-76010
V&W 302500
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L H4	Brighton, L, Outback	Cut to Fit - Small I.D. Heater Hose	Throttle Body Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18010

1997 Subaru Impreza HVAC Heater Hose ZO 18010

Gates HVAC Heater Hose 18010 - Air Control Valve To Water Housing, Throttle Body Inlet

Position: Air Control Valve To Water Housing, Throttle Body Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Fit Notes Position
2.2L H4 Brighton, L, Outback Cut to fit - Molded Heater Hose Fuel Type: GAS Air Control Valve To Water Housing, Throttle Body Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L H4	Brighton, L, Outback	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Air Control Valve To Water Housing, Throttle Body Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

1997 Subaru Impreza HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Heater To Pipe

Position: Heater To Pipe

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Position
1.8L H4 Brighton Thermo End - 90? Molded Coolant Hose Heater To Pipe
2.2L H4 Brighton, L, Outback Thermo End - 90? Molded Coolant Hose Heater To Pipe

Engine	Sub Model	Notes	Position
1.8L H4	Brighton	Thermo End - 90? Molded Coolant Hose	Heater To Pipe
2.2L H4	Brighton, L, Outback	Thermo End - 90? Molded Coolant Hose	Heater To Pipe

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87808

1997 Subaru Impreza HVAC Heater Hose DY 87808

Dayco HVAC Heater Hose 87808 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 7/8
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Position
1.8L H4 Brighton To Eng. - Small I.D. Heater Hose Heater To Pipe
2.2L H4 Brighton, L, Outback To Eng. - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18228L
ACDelco 18056L
ACDelco 16247M
CARQUEST 19131
CARQUEST 19133
CARQUEST 18881
Duralast E87808
Gates 18881
Gates 19133
Gates 19131
NAPA 10881
NAPA 11131
NAPA 11133
Subaru (cars) 72411-AC020
Subaru (cars) 72015-AA030
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L H4	Brighton	To Eng. - Small I.D. Heater Hose	Heater To Pipe
2.2L H4	Brighton, L, Outback	To Eng. - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18881

1997 Subaru Impreza HVAC Heater Hose ZO 18881

Gates HVAC Heater Hose 18881 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.7
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Subaru Impreza Engines.
Engine Sub Model Notes Fit Notes Position
1.8L H4 Brighton Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
2.2L H4 Brighton, L, Outback Molded Heater Hose Fuel Type: GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1997 Subaru Impreza HVAC Heater Hose

Gates HVAC Heater Hose 18257 - Throttle Body To Air Control Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86500 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18010 - Air Control Valve To Water Housing, Throttle Body Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87808 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18881 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14017S
ACDelco	14000S
CARQUEST	18125
CARQUEST	18010
Duralast	B86500
Gates	18125
Gates	18010
General Motors	302650
General Motors	12556443
NAPA	10125
NAPA	10010
Toyota	17343-76010
V&W	302500

ACDelco	18228L
ACDelco	18056L
ACDelco	16247M
CARQUEST	19131
CARQUEST	19133
CARQUEST	18881
Duralast	E87808
Gates	18881
Gates	19133
Gates	19131
NAPA	10881
NAPA	11131
NAPA	11133
Subaru (cars)	72411-AC020
Subaru (cars)	72015-AA030

My Vehicle:

1997 Subaru Impreza HVAC Heater Hose

Gates HVAC Heater Hose 18257 - Throttle Body To Air Control Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86500 - Throttle Body Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18010 - Air Control Valve To Water Housing, Throttle Body Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87808 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18881 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X