2005 Subaru Outback HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19087

Gates HVAC Heater Hose 19087 - Pipe-2 To Engine

Position: Pipe-2 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18277

2005 Subaru Outback HVAC Heater Hose ZO 18277

Gates HVAC Heater Hose 18277 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.3
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18791

2005 Subaru Outback HVAC Heater Hose ZO 18791

Gates HVAC Heater Hose 18791 - Pipe-2 To Thermostat

Position: Pipe-2 To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87894

2005 Subaru Outback HVAC Heater Hose DY 87894

Dayco HVAC Heater Hose 87894 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Position
2.5L H4 i, Limited, XT, XT Limited Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 16613M
ACDelco 14375S
CARQUEST 18632
CARQUEST 19132
Duralast D87894
Gates 19132
Gates 18632
NAPA 10632
NAPA 11132
Subaru (cars) 72411-AE02A
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L H4	i, Limited, XT, XT Limited	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

2005 Subaru Outback HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Heater Outlet

Position: Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Position
2.5L H4 i, Limited, XT, XT Limited 90? Molded Coolant Hose Heater Outlet
3.0L H6 R, R L.L. Bean Edition, VDC Limited 90? Molded Coolant Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.5L H4	i, Limited, XT, XT Limited	90? Molded Coolant Hose	Heater Outlet
3.0L H6	R, R L.L. Bean Edition, VDC Limited	90? Molded Coolant Hose	Heater Outlet

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19423

2005 Subaru Outback HVAC Heater Hose ZO 19423

Gates HVAC Heater Hose 19423 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
2.5L H4 i, Limited, XT, XT Limited VIN 4th Digit G - Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	i, Limited, XT, XT Limited	VIN 4th Digit G - Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19535

2005 Subaru Outback HVAC Heater Hose ZO 19535

Gates HVAC Heater Hose 19535 - Water Pump To Pipe-1

Position: Water Pump To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
2.5L H4 i, Limited, XT, XT Limited Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Water Pump To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	i, Limited, XT, XT Limited	Molded Heater Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Water Pump To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87808

2005 Subaru Outback HVAC Heater Hose DY 87808

Dayco HVAC Heater Hose 87808 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 7/8
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Small I.D. Heater Hose Pipe To Heater
Part Interchange
ACDelco 18228L
ACDelco 18056L
ACDelco 16247M
CARQUEST 19131
CARQUEST 19133
CARQUEST 18881
Duralast E87808
Gates 18881
Gates 19133
Gates 19131
NAPA 10881
NAPA 11131
NAPA 11133
Subaru (cars) 72411-AC020
Subaru (cars) 72015-AA030
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19473

2005 Subaru Outback HVAC Heater Hose ZO 19473

Gates HVAC Heater Hose 19473 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.3
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2005 Subaru Outback Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	i, Limited, XT, XT Limited	VIN 4th Digit B - Molded Heater Hose	Fuel Type: GAS	Heater Outlet
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19422

2005 Subaru Outback HVAC Heater Hose ZO 19422

Gates HVAC Heater Hose 19422 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
2.5L H4 i, Limited, XT, XT Limited VIN 4th Digit G - Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	i, Limited, XT, XT Limited	VIN 4th Digit G - Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19425

2005 Subaru Outback HVAC Heater Hose ZO 19425

Gates HVAC Heater Hose 19425 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2005 Subaru Outback Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	i, Limited, XT, XT Limited	VIN 4th Digit B - Molded Heater Hose	Fuel Type: GAS	Heater Inlet
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2005 Subaru Outback HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Oil Cooler To Pipe

Position: Oil Cooler To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Cut to Length, 2 1/2" - Straight Heater Hose (Standard) Fuel Type: GAS Oil Cooler To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	R, R L.L. Bean Edition, VDC Limited	Cut to Length, 2 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Oil Cooler To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2005 Subaru Outback HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Engine To Pipe-1

Position: Engine To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 R, R L.L. Bean Edition, VDC Limited Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16613M
ACDelco	14375S
CARQUEST	18632
CARQUEST	19132
Duralast	D87894
Gates	19132
Gates	18632
NAPA	10632
NAPA	11132
Subaru (cars)	72411-AE02A

ACDelco	18228L
ACDelco	18056L
ACDelco	16247M
CARQUEST	19131
CARQUEST	19133
CARQUEST	18881
Duralast	E87808
Gates	18881
Gates	19133
Gates	19131
NAPA	10881
NAPA	11131
NAPA	11133
Subaru (cars)	72411-AC020
Subaru (cars)	72015-AA030

My Vehicle:

2005 Subaru Outback HVAC Heater Hose

Gates HVAC Heater Hose 19087 - Pipe-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18277 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18791 - Pipe-2 To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87894 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19423 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19535 - Water Pump To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87808 - Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19473 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19422 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19425 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Engine To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X