2009 Subaru Outback HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86500

Dayco HVAC Heater Hose 86500 - Throttle Body To Pipe

Position: Throttle Body To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 1/4
End 2 Inside Diameter : 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Small I.D. Heater Hose Throttle Body To Pipe
Part Interchange
ACDelco 14017S
ACDelco 14000S
CARQUEST 18125
CARQUEST 18010
Duralast B86500
Gates 18125
Gates 18010
General Motors 302650
General Motors 12556443
NAPA 10125
NAPA 10010
Toyota 17343-76010
V&W 302500
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Small I.D. Heater Hose	Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19087

2009 Subaru Outback HVAC Heater Hose ZO 19087

Gates HVAC Heater Hose 19087 - Pipe-2 To Engine

Position: Pipe-2 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71877

2009 Subaru Outback HVAC Heater Hose DY 71877

Dayco HVAC Heater Hose 71877 - Pipe-2 To Thermostat

Position: Pipe-2 To Thermostat

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Curved Radiator Hose Pipe-2 To Thermostat

Engine	Sub Model	Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Curved Radiator Hose	Pipe-2 To Thermostat

Part Interchange

ACDelco	14314S
ACDelco	14155S
ACDelco	14099S
CARQUEST	18453
CARQUEST	18791
CARQUEST	19025
Duralast	A71877
Ford	F65E-8A582-AO
Ford	1L2Z-18472-BD
Freshstart	4622
Gates	19025
Gates	18791
Gates	18453
General Motors	10242185
General Motors	55565952
General Motors	12593464
General Motors	25862087
General Motors	15138450
General Motors	15832905
Goodyear	63981
Goodyear	63348
Motorcraft	KH101
NAPA	10453
NAPA	11025
NAPA	10791
Toyota	87245-35A50

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18277

2009 Subaru Outback HVAC Heater Hose ZO 18277

Gates HVAC Heater Hose 18277 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.3
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87964

2009 Subaru Outback HVAC Heater Hose DY 87964

Dayco HVAC Heater Hose 87964 - Pipe To Thermostat

Position: Pipe To Thermostat

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 3
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Position
2.5L H4 2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited Small I.D. Heater Hose Pipe To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L H4	2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited	Small I.D. Heater Hose	Pipe To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 18791

2009 Subaru Outback HVAC Heater Hose ZO 18791

Gates HVAC Heater Hose 18791 - Pipe-2 To Thermostat

Position: Pipe-2 To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-2 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 19535

2009 Subaru Outback HVAC Heater Hose ZO 19535

Gates HVAC Heater Hose 19535 - Water Pump To Pipe-1

Position: Water Pump To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
2.5L H4 2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited Molded Heater Hose Cylinder Head Type: SOHC - Fuel Type: GAS Water Pump To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited	Molded Heater Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Water Pump To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19473

2009 Subaru Outback HVAC Heater Hose ZO 19473

Gates HVAC Heater Hose 19473 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.3
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2009 Subaru Outback Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited	VIN 4th Digit B - Molded Heater Hose	Fuel Type: GAS	Heater Outlet
3.0L H6	3.0 R Limited, 3.0 R Premier	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87854

2009 Subaru Outback HVAC Heater Hose DY 87854

Dayco HVAC Heater Hose 87854 - Pipe To Heater, Heater To Pipe

Position: Pipe To Heater, Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 2009 Subaru Outback Engines.

Engine	Sub Model	Notes	Position
2.5L H4	2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited	Cut to Fit - To Eng. - Small I.D. Heater Hose	Heater To Pipe
3.0L H6	3.0 R Limited, 3.0 R Premier	Cut to Fit - Small I.D. Heater Hose	Pipe To Heater

Part Interchange

ACDelco	18097L
ACDelco	16404M
ACDelco	16537M
ACDelco	14533S
ACDelco	16119M
ACDelco	16375M
ACDelco	16120M
ACDelco	16462M
CARQUEST	18026
CARQUEST	19571
CARQUEST	19513
CARQUEST	19368
CARQUEST	19015
CARQUEST	18984
Chrysler	04677587AB
Duralast	E87854
Ford	F3XY-18472-F
Ford	F3XY-18472-E
Gates	19368
Gates	19571
Gates	19015
Gates	19425
Gates	19513
Gates	18026
Gates	18984
Gates	18985
Goodyear	63063
Honda	79721-SXS-A01
NAPA	11015
NAPA	11513
NAPA	11368
NAPA	10985
NAPA	11888
NAPA	10984
NAPA	11425
NAPA	10026
Subaru (cars)	72411-AG00A
Subaru (cars)	72411-AG00B
Toyota	87245-0E150
Toyota	87245-1A580
Toyota	87245-48C00
Toyota	87245-48201

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19425

2009 Subaru Outback HVAC Heater Hose ZO 19425

Gates HVAC Heater Hose 19425 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2009 Subaru Outback Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L H4	2.5i, 2.5i Limited, 2.5i Special Edition, XT Limited	VIN 4th Digit B - Molded Heater Hose	Fuel Type: GAS	Heater Inlet
3.0L H6	3.0 R Limited, 3.0 R Premier	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2009 Subaru Outback HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Oil Cooler To Pipe

Position: Oil Cooler To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Cut to Length, 2 1/2" - Straight Heater Hose (Standard) Fuel Type: GAS Oil Cooler To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L H6	3.0 R Limited, 3.0 R Premier	Cut to Length, 2 1/2" - Straight Heater Hose (Standard)	Fuel Type: GAS	Oil Cooler To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2009 Subaru Outback HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Engine To Pipe-1

Position: Engine To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2009 Subaru Outback Engines.
Engine Sub Model Notes Fit Notes Position
3.0L H6 3.0 R Limited, 3.0 R Premier Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14017S
ACDelco	14000S
CARQUEST	18125
CARQUEST	18010
Duralast	B86500
Gates	18125
Gates	18010
General Motors	302650
General Motors	12556443
NAPA	10125
NAPA	10010
Toyota	17343-76010
V&W	302500

My Vehicle:

2009 Subaru Outback HVAC Heater Hose

Dayco HVAC Heater Hose 86500 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19087 - Pipe-2 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71877 - Pipe-2 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18277 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87964 - Pipe To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18791 - Pipe-2 To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19535 - Water Pump To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19473 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87854 - Pipe To Heater, Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19425 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Oil Cooler To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Engine To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X