1999 Toyota 4Runner HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71311

Dayco HVAC Heater Hose 71311 - Heater To Valve

Position: Heater To Valve

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Position
2.7L L4 Base Curved Radiator Hose Heater To Valve
3.4L V6 Limited, SR5 Curved Radiator Hose Heater To Valve
Part Interchange
ACDelco 14108S
Atlas 642218
CARQUEST 18801
Duralast A71311
Freshstart 3034
Gates 21535
Gates 18801
General Motors 25524572
Goodyear 63029
Goodyear 64288
NAPA 10801
NAPA 8250
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.7L L4	Base	Curved Radiator Hose	Heater To Valve
3.4L V6	Limited, SR5	Curved Radiator Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 28460

1999 Toyota 4Runner HVAC Heater Hose ZO 28460

Gates HVAC Heater Hose 28460 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2, Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2, Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments

This Part Fits Following 1999 Toyota 4Runner Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2
3.4L V6	Limited, SR5	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18801

1999 Toyota 4Runner HVAC Heater Hose ZO 18801

Gates HVAC Heater Hose 18801 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Limited, SR5 Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Limited, SR5	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87673

1999 Toyota 4Runner HVAC Heater Hose DY 87673

Dayco HVAC Heater Hose 87673 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Position
3.4L V6 Limited, SR5 Small I.D. Heater Hose Valve To Engine

Engine	Sub Model	Notes	Position
3.4L V6	Limited, SR5	Small I.D. Heater Hose	Valve To Engine

Part Interchange

ACDelco	16215M
ACDelco	14300S
ACDelco	14120S
CARQUEST	18819
CARQUEST	19176
CARQUEST	19129
Duralast	C87673
Freshstart	63313
Gates	19176
Gates	19129
Gates	18819
Goodyear	63313
Honda	79725-S10-A00
Mitsubishi	MB527608
NAPA	11129
NAPA	10819
NAPA	11176
Toyota	87245-04130
V&W	303673

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

1999 Toyota 4Runner HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Heater To Tee

Position: Heater To Tee

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Position
3.4L V6 Limited, SR5 90? Molded Coolant Hose Heater To Tee

Engine	Sub Model	Notes	Position
3.4L V6	Limited, SR5	90? Molded Coolant Hose	Heater To Tee

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1999 Toyota 4Runner HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Limited, SR5 Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Limited, SR5	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

1999 Toyota 4Runner HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Tee-2 To Heater

Position: Tee-2 To Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1999 Toyota 4Runner Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee-2 To Heater
3.4L V6	Limited, SR5	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee-2 To Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19111

1999 Toyota 4Runner HVAC Heater Hose ZO 19111

Gates HVAC Heater Hose 19111 - Pipe-1 To Heater, Pipe-1 To Tee-2

Position: Pipe-1 To Heater, Pipe-1 To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 34.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Heater, Pipe-1 To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Heater, Pipe-1 To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19130

1999 Toyota 4Runner HVAC Heater Hose ZO 19130

Gates HVAC Heater Hose 19130 - Heater To Pipe-1, Pipe-1 To Tee-2

Position: Heater To Pipe-1, Pipe-1 To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.4
Inside Diameter 1 : .64
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Limited, SR5 W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1, Pipe-1 To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Limited, SR5	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1, Pipe-1 To Tee-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87749

1999 Toyota 4Runner HVAC Heater Hose DY 87749

Dayco HVAC Heater Hose 87749 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Position
3.4L V6 Limited, SR5 Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16111M
ACDelco 1301S
CARQUEST 19130
CARQUEST 18963
Duralast C87749
Gates 18963
Gates 19130
Honda 8-97063-884-0
Isuzu 8-97167-697-0
NAPA 11130
NAPA 10963
Toyota 87245-04140
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	Limited, SR5	Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19129

1999 Toyota 4Runner HVAC Heater Hose ZO 19129

Gates HVAC Heater Hose 19129 - Tee-1 To Engine, Valve To Engine

Position: Tee-1 To Engine, Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.2
Inside Diameter 1 : .64
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Limited, SR5 W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee-1 To Engine, Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Limited, SR5	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Engine, Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

1999 Toyota 4Runner HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Position: Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1999 Toyota 4Runner Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: GAS	Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve
3.4L V6	Limited, SR5	Cut to Length, 11" - Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

1999 Toyota 4Runner HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Auxiliary Heater Pipe-2 To Tee-2, Pipe-4 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1, Tee-1 To Pipe-3

Position: Auxiliary Heater Pipe-2 To Tee-2, Pipe-4 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1, Tee-1 To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1999 Toyota 4Runner Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	W/Aux. Heater; Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1
3.4L V6	Limited, SR5	W/Aux. Heater; Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-4 To Tee-2, Tee-1 To Pipe-3

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1999 Toyota 4Runner HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1

Position: Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1999 Toyota 4Runner Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base	W/Aux. Heater; Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1
3.4L V6	Limited, SR5	W/Aux. Heater; Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Valve To Tee-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14108S
Atlas	642218
CARQUEST	18801
Duralast	A71311
Freshstart	3034
Gates	21535
Gates	18801
General Motors	25524572
Goodyear	63029
Goodyear	64288
NAPA	10801
NAPA	8250

ACDelco	16111M
ACDelco	1301S
CARQUEST	19130
CARQUEST	18963
Duralast	C87749
Gates	18963
Gates	19130
Honda	8-97063-884-0
Isuzu	8-97167-697-0
NAPA	11130
NAPA	10963
Toyota	87245-04140

My Vehicle:

1999 Toyota 4Runner HVAC Heater Hose

Dayco HVAC Heater Hose 71311 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28460 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2, Auxiliary Heater To Pipe-4, Pipe-3 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18801 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87673 - Valve To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Tee-2 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19111 - Pipe-1 To Heater, Pipe-1 To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19130 - Heater To Pipe-1, Pipe-1 To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87749 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19129 - Tee-1 To Engine, Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Auxiliary Heater Pipe-2 To Tee-2, Pipe-4 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1, Tee-1 To Pipe-3

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X