Home

2014 Toyota 4Runner

My Vehicle:

2014 Toyota 4Runner HVAC Heater Hose

We have found 5 HVAC Heater Hose for

2014 Toyota 4Runner

Part Name: HVAC Heater HoseBrand: GatesPart#: 18361

Gates HVAC Heater Hose 18361 - Throttle Body Outlet

Position: Throttle Body Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.9
Inside Diameter 1 : .30
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, SR5, Trail Molded Heater Hose Fuel Type: GAS Throttle Body Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Limited, SR5, Trail	Molded Heater Hose	Fuel Type: GAS	Throttle Body Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19463

2014 Toyota 4Runner HVAC Heater Hose ZO 19463

Gates HVAC Heater Hose 19463 - Heater To Splice (Bottom)

Position: Heater To Splice (Bottom)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.6
Inside Diameter 1 : .65
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, SR5, Trail Molded Heater Hose Fuel Type: GAS Heater To Splice (Bottom)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Limited, SR5, Trail	Molded Heater Hose	Fuel Type: GAS	Heater To Splice (Bottom)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86820

2014 Toyota 4Runner HVAC Heater Hose DY 86820

Dayco HVAC Heater Hose 86820 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 9/16
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 9/16
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2014 Toyota 4Runner Engines.
Engine Sub Model Notes Position
4.0L V6 Trail, Limited, SR5 Heater End - Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14055S
CARQUEST 18403
Duralast B86820
Gates 18403
NAPA 10403
Toyota 87245-60D40
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	Trail, Limited, SR5	Heater End - Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18353

2014 Toyota 4Runner HVAC Heater Hose ZO 18353

Gates HVAC Heater Hose 18353 - Heater To Splice (Top)

Position: Heater To Splice (Top)

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, SR5, Trail Molded Heater Hose Fuel Type: GAS Heater To Splice (Top)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Limited, SR5, Trail	Molded Heater Hose	Fuel Type: GAS	Heater To Splice (Top)

Part Name: HVAC Heater HoseBrand: GatesPart#: 19590

2014 Toyota 4Runner HVAC Heater Hose ZO 19590

Gates HVAC Heater Hose 19590 - Splice To Pipe-2

Position: Splice To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 31.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota 4Runner Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Limited, SR5, Trail Molded Heater Hose Fuel Type: GAS Splice To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14055S
CARQUEST	18403
Duralast	B86820
Gates	18403
NAPA	10403
Toyota	87245-60D40

My Vehicle:

2014 Toyota 4Runner HVAC Heater Hose

Gates HVAC Heater Hose 18361 - Throttle Body Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19463 - Heater To Splice (Bottom)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86820 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18353 - Heater To Splice (Top)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19590 - Splice To Pipe-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X