1989 Toyota Camry HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87663

Dayco HVAC Heater Hose 87663 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Position
2.0L L4 Base, DLX, DLX All Trac, LE, LE All Trac Small I.D. Heater Hose Heater To Valve
2.5L V6 DLX, LE Small I.D. Heater Hose Heater To Valve
Part Interchange
ACDelco 14108S
CARQUEST 18801
Datsun/Nissan 14055-55M05
Datsun/Nissan 14056-40F00
Duralast B87663
Freshstart 4369
Gates 18801
Goodyear 64288
Honda 79722-SR0-000
Honda 79722-S02-A00
Honda 79722-SR3-000
NAPA 10801
V&W 303663
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	Base, DLX, DLX All Trac, LE, LE All Trac	Small I.D. Heater Hose	Heater To Valve
2.5L V6	DLX, LE	Small I.D. Heater Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 18801

1989 Toyota Camry HVAC Heater Hose ZO 18801

Gates HVAC Heater Hose 18801 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Base, DLX, DLX All Trac, LE, LE All Trac Molded Heater Hose Fuel Type: GAS Heater To Valve
2.5L V6 DLX, LE Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Base, DLX, DLX All Trac, LE, LE All Trac	Molded Heater Hose	Fuel Type: GAS	Heater To Valve
2.5L V6	DLX, LE	Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86800

1989 Toyota Camry HVAC Heater Hose DY 86800

Dayco HVAC Heater Hose 86800 - Pipe To Pipe

Position: Pipe To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Position
2.5L V6 DLX, LE Small I.D. Heater Hose Pipe To Pipe

Engine	Sub Model	Notes	Position
2.5L V6	DLX, LE	Small I.D. Heater Hose	Pipe To Pipe

Part Interchange

ACDelco	14001S
CARQUEST	18020
Datsun/Nissan	14056-65Y10
Datsun/Nissan	14056-86G02
Datsun/Nissan	14056-D3310
Datsun/Nissan	14056-40F12
Datsun/Nissan	14056-88G02
Datsun/Nissan	14056-97000
Datsun/Nissan	14055-57Y12
Datsun/Nissan	14055-D4200
Datsun/Nissan	14056-30P21
Datsun/Nissan	14056-30P24
Datsun/Nissan	14056-30R16
Datsun/Nissan	14056-40F04
Duralast	B86800
Ford	F5TH-18C266-AB
Gates	18020
Goodyear	64310
Honda	19506-PC6-000
Honda	19508-PK2-000
Honda	19510-PH3-000
Honda	19511-PH3-J00
Honda	19511-PH3-000
Honda	19514-PJ0-660
NAPA	10020
Toyota	16264-16050
Toyota	16264-62030
Toyota	16267-16040
Toyota	16281-62010
Toyota	16267-76010
Toyota	16261-73070
V&W	302800

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1989 Toyota Camry HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Pipe-2, Pipe-3 To Pipe-4

Position: Pipe-1 To Pipe-2, Pipe-3 To Pipe-4

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 DLX, LE Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Pipe-2, Pipe-3 To Pipe-4
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	DLX, LE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Pipe-2, Pipe-3 To Pipe-4

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87710

1989 Toyota Camry HVAC Heater Hose DY 87710

Dayco HVAC Heater Hose 87710 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Position
2.5L V6 DLX, LE Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18064L
CARQUEST 18893
Duralast E87710
Freshstart 4328
Gates 18893
NAPA 10893
Toyota 87245-32190
V&W 303710
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L V6	DLX, LE	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18893

1989 Toyota Camry HVAC Heater Hose ZO 18893

Gates HVAC Heater Hose 18893 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 DLX, LE Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	DLX, LE	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18862

1989 Toyota Camry HVAC Heater Hose ZO 18862

Gates HVAC Heater Hose 18862 - Valve To Pipe

Position: Valve To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.5L V6 DLX, LE Models made in Japan. - Molded Heater Hose Fuel Type: GAS Valve To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L V6	DLX, LE	Models made in Japan. - Molded Heater Hose	Fuel Type: GAS	Valve To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1989 Toyota Camry HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Pipe, Valve To Pipe

Position: Heater To Pipe, Valve To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1989 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Base, DLX, DLX All Trac, LE, LE All Trac Cut to Length, 18" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Pipe, Valve To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1989 Toyota Camry HVAC Heater Hose

Dayco HVAC Heater Hose 87663 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18801 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86800 - Pipe To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Pipe-2, Pipe-3 To Pipe-4

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87710 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18893 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18862 - Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe, Valve To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14108S
CARQUEST	18801
Datsun/Nissan	14055-55M05
Datsun/Nissan	14056-40F00
Duralast	B87663
Freshstart	4369
Gates	18801
Goodyear	64288
Honda	79722-SR0-000
Honda	79722-S02-A00
Honda	79722-SR3-000
NAPA	10801
V&W	303663

ACDelco	18064L
CARQUEST	18893
Duralast	E87710
Freshstart	4328
Gates	18893
NAPA	10893
Toyota	87245-32190
V&W	303710

My Vehicle:

1989 Toyota Camry HVAC Heater Hose

Dayco HVAC Heater Hose 87663 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18801 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86800 - Pipe To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Pipe-2, Pipe-3 To Pipe-4

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87710 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18893 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18862 - Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe, Valve To Pipe

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X